Concept

Ultra-high-molecular-weight polyethylene

Related publications (26)

Process-Induced Structures of Injection-Molded High-Density Polyethylene-Combining X-ray Scattering and Finite Element Modeling

The success of plastics heavily relies on fast melt processing methods used for large-scale industrial manufacturing, including injection molding. The hierarchical structure of the solid polymer depends on material selection combined with processing condit ...

Amer Chemical Soc2024

Searching for the Thinnest Metallic Wire

Nicola Marzari, Davide Campi, Chiara Cignarella

One-dimensional materials have gained much attention in the last decades: from carbon nanotubes to ultrathin nanowires to few-atom atomic chains, these can all display unique electronic properties and great potential for next-generation applications. Exfol ...

Amer Chemical Soc2024

Reinforced Supramolecular Networks of End Functionalized Polymers for Tailored Thermomechanical Property Profiles

Yevhen Hryshunin

Thermoset rubbers give rise to elastomers with tunable stiffness and high resilience but are not recyclable. Thermoplastic elastomers can address this problem but their broad applicability is impeded by either limited operating temperatures or inferior ela ...

EPFL2023

Scanning Small-Angle X-ray Scattering of Injection-Molded Polymers: Anisotropic Structure and Mechanical Properties of Low-Density Polyethylene

Marianne Liebi, Manuel Guizar Sicairos

Injection molding is known to create a layered anisotropicmorphologyacross the sample thickness due to varying shear and cooling ratesduring the manufacturing process. In this study, scanning small-angleX-ray scattering was used to visualize and quantify t ...

AMER CHEMICAL SOC2023

Incorporation of Lignin in Bio-Based Resins for Potential Application in Fiber-Polymer Composites

Mateus De Assunção Hofmann

Bio-based resins, obtained from renewable raw materials, are a more sustainable alternative to oil-based resins for fiber-reinforced polymer (FRP) composites. The incorporation of lignin in those resins has the potential to enhance their performance. This ...

MDPI2023

Polyethylene wear of dual mobility cups: a comparative analysis based on patient-specific finite element modeling

Alexandre Terrier, Ehsan Sarshari, Matthieu Boubat

Purpose Concerns remain about potential increased wear with dual mobility cups related to the multiple articulations involved in this specific design of implant. This finite element analysis study aimed to compare polyethylene (PE) wear between dual mobili ...

SPRINGER2022

Quantified Effects of Multiple Parameters on Inputs and Potential Sources of Microplastics from a Typical River Flowing into the Sea

Florian Frédéric Vincent Breider

As an important connection of terrestrial and marine ecosystems, rivers input multitudinous (micro)plastics into the oceans. However, comparisons of field and estimated riverine inputs of (micro)plastics and contributions of multiple parameters are limited ...

2022

Direct encapsulation of biomolecules in semi-permeable microcapsules produced with double-emulsions

Sebastian Maerkl, Grégoire Michielin

Compartmentalization can serve different purposes such as the protection of biological active substances from the environment, or the creation of a unique combination of biomolecules for diagnostic, therapeutic, or other bioengineering applications. We pre ...

Nature Portfolio2022

Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing

Véronique Michaud

Nowadays the use of natural fiber composites has gained significant interest due to their low density, high availability, and low cost. The present study explores the development of sustainable 3D printing filaments based on rice husk (RH), an agricultural ...

2021

Insights into the Horizontal and Vertical Profiles of Microplastics in a River Emptying into the Sea Affected by Intensive Anthropogenic Activities in Northern China

Florian Frédéric Vincent Breider

Studies focused only on surface water may underestimate microplastic abundance in aquatic environments. This was the first survey to investigate the vertical (surface, intermediate, and bottom waters) distribution and composition of microplastics (MPs) in ...

2021

Static and dynamic mechanical properties of nanosilica and multiwalled carbon nanotube reinforced acrylonitrile butadiene styrene composites: theoretical mechanism of nanofiller reinforcement

Thomas Keller

Experimental and theoretical approaches were employed to analyze the static and dynamic mechanical properties of acrylonitrile butadiene styrene (ABS) nanocomposites reinforced with multiwalled carbon nanotube (MWCNT) and nanosilica. Enhanced stiffness and ...

SPRINGER2021

Reversible Oxygen Sensing Based on Multi-Emission Fluorescence Quenching

Esther Amstad, Efe Armagan

Oxygen is ubiquitous in nature and it plays a key role in several biological processes, such as cellular respiration and food deterioration, to name a few. Currently, reversible and non-destructive oxygen sensing is usually performed with sensors produced ...

2020

Effects of Anthropogenic Discharge and Hydraulic Deposition on the Distribution and Accumulation of Microplastics in Surface Sediments of a Typical Seagoing River: The Haihe River

Florian Frédéric Vincent Breider

Microplastics pollution in river systems has generated great concern; however, few studies have focused on the contributions of multiple influencing factors to microplastics in river systems. In the current study, we utilized data on microplastics in surfa ...

2020

The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete

The advent of digital concrete fabrication calls for advancing our understanding of the interaction of 3D printing with material rheology and print parameters, in addition to developing new measurement and control techniques. Thixotropy is the main challen ...

2019

Next generation UHPFRC for sustainable structural applications

Emmanuel Denarié, Amir Hajiesmaeili

Over the last few decades, ever-increasing demands of society to the built environment have continually increased consumption of energy and materials for the construction and maintenance of structures. Meanwhile, Strain Hardening Ultra High-Performance Fib ...

2018

Bio-Inspired Fluorine-Free Self-Cleaning Polymer Coatings

Yves Leterrier, Sara Dalle Vacche, Feyza Karasu Kiliç

Bio-inspired fluorine-free and self-cleaning polymer coatings were developed using a combination of self-assembly and UV-printing processes. Nasturtium and lotus leaves were selected as natural template surfaces. A UV-curable acrylate oligomer and three ac ...

2018

On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding

Jean-Marie Drezet

Aluminum alloy AA6061 was welded to dual-phase steel 980 (DP980) by the friction melt bonding (FMB) process. Hot tears have been suppressed by controlling the thermomechanical cycle. In particular, the welding speed and the thermal conductivity of the back ...

2018

All natural cork composites with suberin-based polyester and lignocellulosic residue

Véronique Michaud, Hugo De Oliveira

Suberin is an aromatic-aliphatic cross-linked polyester structure which constitutes cell wall structures of cork. It is particularly interesting for its use of monomeric compounds towards renewable bio-based polymers. In this study, the extraction of suber ...

Elsevier2017

Multi-material stretchable optical, electronic and optoelectronic fibers and ribbons composites via thermal drawing

Fabien Sorin, Wei Yan, Alexis Gérald Page, Yunpeng Qu, Dang Tùng Nguyen, Marco Volpi

The present invention concerns a thermal drawing method for forming fibers, wherein said fibers are made at least from a stretchable polymer. The present invention also concerns drawn fibers made by the process. ...

2017

Effect of fiber orientation and specimen thickness on the tensile response of strain hardening UHPFRC mixes with reduced Embodied Energy

Emmanuel Denarié, Amir Hajiesmaeili

Ultra-High Performance Fiber Reinforced Concretes (UHPFRC) have demonstrated their potential to contain the explosion of maintenance costs (Economy and Environment) for civil engineering structures, due to their extremely low permeability associated with t ...

Springer Netherlands2018