Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Crystallinity

Related publications (31)

Ultrahigh-quality-factor micro- and nanomechanical resonators using dissipation dilution

Tobias Kippenberg, Nils Johan Engelsen, Alberto Beccari

Mechanical resonators are widely used in sensors, transducers and optomechanical systems, where mechanical dissipation sets the ultimate limit to performance. Over the past 15 years, the quality factors in strained mechanical resonators have increased by f ...

Nature Portfolio2024

A continuous-wave and pulsed X-band electron spin resonance spectrometer operating in ultra-high vacuum for the study of low dimensional spin ensembles

Giovanni Boero, Fabio Donati, Soyoung Oh

We report the development of a continuous-wave and pulsed X-band electron spin resonance (ESR) spectrometer for the study of spins on ordered surfaces down to cryogenic temperatures. The spectrometer operates in ultra-high vacuum and utilizes a half-wavele ...

Aip Publishing2024

Atomic scale volume and grain boundary diffusion elucidated by in situ STEM

Johann Michler, Xavier Maeder, Laszlo Pethö

Diffusion is one of the most important phenomena studied in science ranging from physics to biology and, in abstract form, even in social sciences. In the field of materials science, diffusion in crystalline solids is of particular interest as it plays a p ...

Nature Portfolio2023

Anomalous topological waves in strongly amorphous scattering networks

Romain Christophe Rémy Fleury, Zhechen Zhang, Zhe Zhang, Pierre Delplace

Topological insulators are crystalline materials that have revolutionized our ability to control wave transport. They provide us with unidirectional channels that are immune to obstacles, defects, or local disorder and can even survive some random deformat ...

2023

Impact of rapid thermal processing on bulk and surface recombination mechanisms in FZ silicon with fired passivating contacts

Christophe Ballif, Franz-Josef Haug, Andrea Ingenito, Mario Joe Lehmann, Audrey Marie Isabelle Morisset, Sofia Libraro

We investigate bulk and interface recombination in crystalline silicon with p-type fired passivating contacts. These consist of a chemical oxide and an in-situ doped layer of SiCx with low carbon content. Following a rapid thermal annealing to activate the ...

ELSEVIER2022

Local excitations in amorphous solids

Wencheng Ji

Amorphous solids are structurally disordered. They are very common and include glasses, colloids, and granular materials, but are far less understood than crystalline solids. Key aspects of these materials are controlled by the presence of excitations in w ...

EPFL2021

Interaction of Confined Polaritons in Microcavity Structures

Morteza Navadeh Toupchi

A polariton is a quasiparticle formed from the coupling of a confined photon in a cavity to electronic excitation, like exciton in a semiconductor. This dissertation reports on series of experiments in confined polariton interaction by design, fabrication, ...

EPFL2021

Optimization of composition and structure of cemented carbide cutting tools

Samy Adjam

WC-Co cemented carbides are composites, which combine a hard phase consisting of WC grains and a metallic ductile phase as a binder. Their excellent mechanical properties, combining high hardness, toughness and refractory properties, make them excellent ma ...

EPFL2021

Tensile and Impact Toughness Properties of a Zr-Based Bulk Metallic Glass Fabricated via Laser Powder-Bed Fusion

Roland Logé, Jamasp Jhabvala, Antonia Neels, Navid Sohrabi, Annapaola Parrilli

In the past few years, laser powder-bed fusion (LPBF) of bulk metallic glasses (BMGs) has gained significant interest because of the high heating and cooling rates inherent to the process, providing the means to bypass the crystallization threshold. In thi ...

MDPI2021

Crystalline Order in Compound Semiconductors in Nanoscale Structures and Thin Films

Mahdi Zamani

Semiconductors materials and devices are essential building blocks for many of the technologies deeply embedded in modern life. Improving the performance of semiconductor devices requires a deeper understanding of the fundamental mechanisms controlling the ...

EPFL2021

Luminescent, porous, metal-organic crystals: Design, synthesis, and applications

Fatmah Ebrahim

The work presented in this thesis is focused on the design and discovery of new luminescent, porous, crystalline materials for targeted applications. In particular, we focus on luminescent Metal-Organic Frameworks (MOFs) and Organic Molecules of Intrinsic ...

EPFL2020

Grain morphology reconstruction of crystalline materials from Laue three-dimensional neutron diffraction tomography

Marina Garcia Gonzalez

The macroscopic properties of advanced engineering and functional materials are highly dependent on their overall grain orientation distribution, size, and morphology. Here we present Laue 3D neutron diffraction tomography providing reconstructions of the ...

Nature Research2020

Characterizing crystalline defects in single nanoparticles from angular correlations of single-shot diffracted X-rays

Christoph Bostedt

Characterizing and controlling the uniformity of nanoparticles is crucial for their application in science and technology because crystalline defects in the nanoparticles strongly affect their unique properties. Recently, ultra-short and ultra-bright X-ray ...

INT UNION CRYSTALLOGRAPHY2020

Optoelectronic and magnetic properties induced by atomic defects in two-dimensional semiconductors

Alessio Scavuzzo

Two-dimensional (2D) materials have attracted increasing attention over the last decade owing to their remarkable mechanical, electrical and optical properties. Following the groundbreaking discovery of graphene, a plethora of other atomically-thin materia ...

EPFL2020

Giant anomalous Hall effect in quasi-two-dimensional layered antiferromagnet Co1/3NbS2

László Forró, Helmuth Berger, Edoardo Martino

The discovery of the anomalous Hall effect (AHE) in bulk metallic antiferromagnets (AFMs) motivates the search of the same phenomenon in two-dimensional (2D) systems, where a quantized anomalous Hall conductance can, in principle, be observed. Here we pres ...

AMER PHYSICAL SOC2020

The Synergism of DMSO and Diethyl Ether for Highly Reproducible and Efficient MA(0.5)FA(0.5)PbI(3)Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Yi Zhang, Hiroyuki Kanda, Tom Theodorus Antonius Lummen, Yonghui Lee, Keith Gregory Brooks, Florian Berczy, Alexandre Vincent Laurent Chenu, Paolo Francioli

Composition and film quality of perovskite are crucial for the further improvement of perovskite solar cells (PSCs), including efficiency, reproducibility, and stability. Here, it is demonstrated that by simply mixing 50% of formamidinium (FA(+)) into meth ...

2020

Shape Engineering of Metal-Organic Frameworks via MOF@Polymer Composite Fabrication

Bardiya Valizadeh

Metal-organic frameworks (MOFs) are a fascinating class of porous materials that have become the subject of research owing to their unique characteristics such as high surface areas, low densities, and structural tunability. Recently, the research has been ...

EPFL2020

Building a Consistent and Reproducible Database for Adsorption Evaluation in Covalent-Organic Frameworks

Berend Smit, Daniele Ongari, Christoph Leopold Talirz, Aliaksandr Yakutovich

We present a workflow that traces the path from the bulk structure of a crystalline material to assessing its performance in carbon capture from coal's postcombustion flue gases. This workflow is applied to a database of 324 covalent-organic frameworks (CO ...

2019

Synthesis, Characterization, and Applications of Visible Light Active Metal-Organic Frameworks

Samantha Lynn Anderson

Understanding how crystalline materials are assembled is important for the rational design of metal-organic frameworks (MOFs). Controlling their formation can allow researchers to streamline the synthesis of new materials as well as control their propertie ...

EPFL2019

Impact Impact of different capping layers on carrier injection efficiency between amorphous and crystalline silicon measured using photoluminescence

Andrea Ingenito, Gizem Nogay, Philipp Friedrich Hermann Löper

Intrinsic amorphous silicon provides excellent surface passivation on crystalline silicon. It has previously been shown, that carriers that are photo generated in the amorphous silicon can be efficiently electronically injected into the crystalline silicon ...

ELSEVIER SCIENCE BV2018