Barbara GalimbertiExpertise
Archival science, collections management, and information sciences applied to architectural archives and to heritage and research collections, within the Archives of Modern Construction (ACM) of the École polytechnique fédérale de Lausanne.Standardized archival description, metadata structuring and governance, dissemination of finding aids, and development of digital infrastructures for long-term preservation and access (Morphé / AtoM + Archivematica ; MorphéPlus).Intellectual and physical process
Adriano MeleI am a control engineer and plasma scientist at the Swiss Plasma Center of the École Polytechnique Fédérale de Lausanne.I am also Research Topic Coordinator in the EUROfusion Tokamak Exploitation WorkPackage, for the Research Topic 04: Physics-based machine generic systems for an integrated control of plasma discharge, and an Associate Editor in the Franklin Open journal.In 2022-2023, I have been an Assistant Professor in Automatic Control at the University of Tuscia, Viterbo.Before that, from 2019 to 2021,
Antoine Pierre Emmanuel Alexis MerleTeaching & PhD PhD Students Guillaume Raphäel Hervé Van Parys, Cosmas Quirin Lorenz Heiss Courses Control and Operation of Tokamaks PHYS-748 This course treats the main issues in operation and control of a tokamak. Control-oriented models are derived and controllers are designed using techniques from modern control theory. Operational limits are discussed as well as state-of-the-art research questions for future reactors. Magnetic confinement PHYS-731 To provide an overview
Cristian GalpertiExpertise
Control systems design and commissioning, especially involving complex scientific research architectures. Electronics engineering, embedded systems design and programming. Mechanical engineering, servo actuator systems design and commissioning.
Current Work
In charge of the direction of the control systems service of the Swiss Plasma Center
Education Ph.D. in Computer Science | 2005 – 2009 Politecnico di Milano Master degree in Electronics Engineering | 1998
Giovanni De MicheliExpertise
Design technologies for integrated systems on silicon, such as synthesis, hw/sw codesign and low-power design, as well as systems on heterogeneous platforms including electrical and biological components.
Scientific Director of EcoCloud Center at EPFL
Directing activities towards creating sustainable computation including AI.Designing energy-savvy data centers and edge devices.
More information
Please read http://si2.epfl.ch/~demichel/
Giovanni De Micheli is a research scientist in electronics and Denis GilletDenis Gillet received the Diploma in Electrical Engineering from the Swiss Federal Institute of Technology in Lausanne (EPFL) in 1988, and the Ph.D. degree in Information Systems also from the EPFL in 1995. During 1992 he was appointed as Research Fellow at the Information Systems Laboratory of Stanford University in the United States. He is currently Maître d'enseignement et de recherche at the EPFL School of Engineering, where he leads the React research group. His current research interests include Technologies Enhanced Learning (TEL), Human Computer Interaction (HCI), Human Devices Interaction (HDI) and Optimal Coordination of Complex and Distributed Systems. Denis Gillet is affiliated at EPFL with the Center for Intelligent Systems and the Center for Digital Education.
Christophe SalzmannExpertise
Real-time Internet ServicesReal-time controlQuality of Service and Bandwidth adaptationLabVIEW
Education PhD | Remote experimentation, Network 2005 – 2005 EPFL Directed by Denis Gillet MS. Degree | Computer Science 1999 – 1999 University of Florida Directed by Prof. H. Latchman
Teaching & PhD Past EPFL PhD Students as codirector Damien Perritaz, Evgeny Bogdanov, Wissam Halimi Courses Control systems + TP ME
Michaël UnserExpertise
Image Processing, Medical Imaging, Biological Imaging, Wavelets, Splines, Multiresolution
Michael Unser is Full Professor with EPFL’s school of Engineering and the academic director of EPFL's Center for Imaging, Lausanne, Switzerland. His primary areas of investigation are signal processing, biomedical imaging and applied functional analysis. He is internationally recognized for his research contributions to sampling theory, wavelets, the use of splines for image processing, stochastic processes,
Mohamed BouriDr. Mohamed Bouri is a group leader of Rehabilitation and Assistive Robotics in LSRO and lecturer of Robotics and Industrial Robotics. He graduated in Electrical Engineering in 1992 and obtained his PhD degree in 1997 in Industrial Automation at INSA LYON, France. Since 1997, he is at EPFL and is mainly active in the field of robot control, automation and robot design for medical and industrial applications. He is the head of Rehabilitation and Assistive Robotics group since 2005 and has strong references with the development of robotic devices for lower limb rehabilitation : The MotionMaker and WalkTrainer commercialzed by the company Swortec. His ongoing research currently focuses on the development of exoskeletons and the associated control strategies. His main current projects are TWIICE, a lower limb exoskeleton for people with paraplegia, AUTONOMYO, a walk assistance exoskeleton for people with muscle weakness, and the HiBSO, a hip orthosis for elderly.
Olivier SauterTeaching & PhD PhD Students Cassandre Ekta Contré, Antonia Frank, Peizheng Zhang, Jean-Pierre Thomas Svantner, Cristina Venturini, Cosmas Quirin Lorenz Heiss, Daniel Perales Rios, Viacheslav Bochkarev, Jan Jakub Frybes, Paul Véronique Guillaume Devianne Past EPFL PhD Students Clemente Angioni, Petri Nikkola, Alberto Bottino, Andrei Martynov, Emiliano Fable, Costanza Zucca, Federico Felici, Dávid Wágner, Doohyun Kim, Anna Teplukhina, Mengdi Kong, Francesco Carpanese, Simon Van Mulders, Stefano Marchioni, F
Nadine BalucTeaching & PhD Past EPFL PhD Students Emmanuelle Giacometti, Raluca Schibli, Gang Yu, Bin Long, Lyubomira Veleva
Jean-Paul Richard KneibExpertise
Cosmology, Gravitational Lensing, Redshift Survey, First Galaxies, Cluster of Galaxies, Fiber-positioner robotic system, Radio Astronomy, Space Sustainibility
Current work
- Former Principal investigator of the SDSS-IV eBOSS project. This is an international project assembling more than 150 participants located mainly in Europe, USA and China. This project will observe 1.5 million galaxy and quasars over 2014-2020 to accurately measure the expansion history of the Universe. * Member of the DESI co
Edoardo CharbonEdoardo Charbon (SM’00 F’17) received the Elektrotechnik Diploma from ETH Zurich, the M.S. from the University of California at San Diego, and the Ph.D. from the University of California at Berkeley in 1988, 1991, and 1995, respectively, all in electrical engineering and EECS. He has consulted with numerous organizations, including Bosch, X-Fab, Texas Instruments, Maxim, Sony, Agilent, and the Carlyle Group. He was with Cadence Design Systems from 1995 to 2000, where he was the architect of the company's initiative on information hiding for intellectual property protection. In 2000, he joined Canesta Inc., as the Chief Architect, where he led the development of wireless 3-D CMOS image sensors. Since 2002 he has been a member of the faculty of EPFL, where is a full professor since 2015. From 2008 to 2016 he was full professor and chair at the Delft University of Technology, where he spearheaded the university's effort on cryogenic electronics for quantum computing as part of QuTech. He has been the driving force behind the creation of deep-submicron CMOS SPAD technology, which is mass-produced since 2015 and is present in smartphones, telemeters, proximity sensors, and medical diagnostics tools. His interests span from 3-D vision, LiDAR, FLIM, FCS, NIROT to super-resolution microscopy, time-resolved Raman spectroscopy, and cryo-CMOS circuits and systems for quantum computing. He has authored or co-authored over 400 papers and two books, and he holds 23 patents. Dr. Charbon is a distinguished visiting scholar of the W. M. Keck Institute for Space at Caltech, a fellow of the Kavli Institute of Nanoscience Delft, a distinguished lecturer of the IEEE Photonics Society, and a fellow of the IEEE.
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Serge VaudenaySerge Vaudenay entered at the Ecole Normale Supérieure in 1989 with a major in mathematics. He earned his agrégation (secondary teaching degree) in mathematics in 1992, then a PhD in Computer Science at the University of Paris 7 - Denis Diderot in 1995. He subsequently became a senior research fellow at the CNRS, prior to being granted his habilitation à diriger des recherches (a postdoctoral degree authorizing the recipient to supervise doctoral students). In 1999, he was appointed as a Professor at the EPFL, where he created the Security and Cryptography Laboratory.
