Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Nanolithography

Related publications (25)

Nanolithography of the nanocorral structure of chemisorbed oxygen atoms on the graphitic lattice

Kumar Varoon Agrawal, Shaoxian Li

Controlled atomic patterning is an attractive tool to fine tune properties of graphitic lattice. Several O-functionalized derivatives of graphitic lattice have been widely studied, e.g., graphene oxide, reduced graphene oxide, and functionalized carbon nan ...

Pergamon-Elsevier Science Ltd2024

Stencil-Based Selective Surface Functionalization of Silicon Nanowires in 3D Device Architectures for Next-Generation Biochemical Sensors

Yusuf Leblebici

Surface functionalization of 1D materials such as silicon nanowires is a critical preparation technology for biochemical sensing. However, existing nonselective functionalization techniques result in nonlocal binding and contamination, with potential devic ...

Amer Chemical Soc2024

Growth and Doping Mechanisms of III-V Nanostructures by Selective Area Epitaxy

Didem Dede

Selective area epitaxy (SAE), applied to semiconductor growth, allows tailored fabrication of intricate structures at the nanoscale with enhanced properties and functionalities. In the field of nanowires (NWs), it adds scalability by enabling the fabricati ...

EPFL2024

Molecular sensitised probe for amino acid recognition within peptide sequences

Klaus Kern, Stephan Rauschenbach, Uta Schlickum, Sabine Abb, Daniel Pablo Rosenblatt, Sebastian Koslowski

The combination of low-temperature scanning tunnelling microscopy with a mass-selective electro-spray ion-beam deposition established the investigation of large biomolecules at nanometer and sub-nanometer scale. Due to complex architecture and conformation ...

Nature Portfolio2023

A versatile platform for graphene nanoribbon synthesis, electronic decoupling, and spin polarized measurements

Donat Fabian Natterer, Johannes Schwenk

The on-surface synthesis of nano-graphenes has led the charge in prototyping structures with perspectives beyond silicon-based technology. Following reports of open-shell systems in graphene-nanoribbons (GNRs), a flurry of research activity was directed at ...

ROYAL SOC CHEMISTRY2023

Energy Efficient Logic and Memory Design With Beyond-CMOS Magnetoelectric Spin-Orbit (MESO) Technology Toward Ultralow Supply Voltage

Kyojin Choo

Devices based on the spin as the fundamental computing unit provide a promising beyond-complementary metal-oxide-semiconductor (CMOS) device option, thanks to their energy efficiency and compatibility with CMOS. One such option is a magnetoelectric spin-or ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

Simultaneous local sensing of two chemical properties with dual soft probe scanning electrochemical microscopy

Hubert Girault, Andreas Stephan Lesch

A new method for the rapid and economic fabrication of dual soft microelectrodes for Soft-Probe-Scanning electrochemical microscopy (Soft-Probe-SECM) and their use for the simultaneous local detection of locally generated species is presented. The process ...

PERGAMON-ELSEVIER SCIENCE LTD2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Duccio Testa, Ambrine Douhane, Marcus Cemes

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Controlling motion at the nanoscale with light

Mintae Chung

Optical manipulation at the micro- nano-scale is a fascinating topic due to its inherent non-invasive properties and multifaceted applications in various fields such as biology, sensing, micro-fluidics, and micro- nano-robotics. This thesis involves intens ...

EPFL2022

A Low-Temperature Annealing Method for Alloy Nanostructures and Metasurfaces: Unlocking a Novel Degree of Freedom

Olivier Martin, Christian Santschi, Hsiang-Chu Wang, Jeonghyeon Kim, Debdatta Ray

The material and exact shape of a nanostructure determine its optical response, which is especially strong for plasmonic metals. Unfortunately, only a few plasmonic metals are available, which limits the spectral range where these strong optical effects ca ...

Wiley-V C H Verlag Gmbh2022

Femtosecond laser-based optomechanical processes for permanent and high-precision fine alignment of optical systems

Saood Ibni Nazir

Miniaturization has been at the forefront of scientific research in the past decade covering diverse areas such as electronics, mechanics, and optics. While 'small is beautiful' may be a vast generalization, the true benefits of miniaturization are especia ...

EPFL2021

Nanopillars Enabling III-V Integration on Si (100) and (111)

Lucas Güniat

The majority of current semiconductor technologies are built on Si (100), such as the CMOS technology, or conventional solar cell devices. III-V semiconductors offer great perspectives given their high carrier mobility and direct band gap. However their in ...

EPFL2021

Thermal scanning probe lithography-a review

Jürgen Brugger, Samuel Tobias Howell

Fundamental aspects and state-of-the-art results of thermal scanning probe lithography (t-SPL) are reviewed here. t-SPL is an emerging direct-write nanolithography method with many unique properties which enable original or improved nano-patterning in appl ...

2020

Directed Self-Assembly of Block Copolymers for the Fabrication of Functional Devices

Luis Guillermo Villanueva Torrijo

Directed self-assembly of block copolymers is a bottom-up approach to nanofabrication that has attracted high interest in recent years due to its inherent simplicity, high throughput, low cost and potential for sub-10 nm resolution. In this paper, we revie ...

MDPI2020

Comparative characterisation of non-monodisperse gold nanoparticle populations by X-ray scattering and electron microscopy

Francesco Stellacci, Stefan Guldin, Zhi Luo, Suiyang Liao

Accurate nanoparticle size determination is essential across various research domains, with many functionalities in nanoscience and biomedical research being size-dependent. Although electron microscopy is capable of resolving a single particle down to the ...

2020

Fundamental Applications of Nanopores: Controlled DNA Translocations to Nanofluidics

Sebastian James Davis

Nanopores are nanometer sized openings that are the connection between two electrolyte filled reservoirs. The measurement of the ion transport flowing through such a pore allows to probe physically or biologically interesting phenomena. These range from th ...

EPFL2020

An atomic force microscope integrated with a helium ion microscope for correlative nanoscale characterization

Georg Fantner, Santiago Harald Andany, Charlène Cécile Geneviève Brillard

In this work, we report on the integration of an atomic force microscope (AFM) into a helium ion microscope (HIM). The HIM is a powerful instrument, capable of imaging and machining of nanoscale structures with sub-nanometer resolution, while the AFM is a ...

BEILSTEIN-INSTITUT2020

Electron Beam Induced Copper Deposition from Carboxylate Precursors and the Study of Underlying Growth Mechanisms

Luisa Berger

The fabrication of defined and high-quality metal nanostructures is an ongoing topic of research. Direct-write deposition of copper nanostructures is of great value for many fields of research and industrial applications. Focused electron beam induced depo ...

EPFL2020

Thermomechanical Nanostraining of Two-Dimensional Materials

Jürgen Brugger, Giovanni Boero, Xia Liu, Ana Conde Rubio, Samuel Tobias Howell

Local bandgap tuning in two-dimensional (2D) materials is of significant importance for electronic and optoelectronic devices but achieving controllable and reproducible strain engineering at the nanoscale remains a challenge. Here, we report on thermomech ...

American Chemical Society (ACS)2020