Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Containment building

Related publications (25)

Monte Carlo analysis of BWR geometries using a cycle check-up methodology

Mathieu Hursin, Hakim Ferroukhi, Dimitri Rochman, Abdelhamid Dokhane

Recent fuel anomalies at a Swiss power plant have motivated the development at PSI of the "Cycle Check-Up" (CHUP) methodology which consists in performing Monte Carlo transport calculations using nuclide compositions and thermal-hydraulic boundary conditio ...

Pergamon-Elsevier Science Ltd2023

Extension of GeN-Foam to departure from nucleate boiling prediction and validation against the OECD/NRC PSBT benchmark

Carlo Fiorina, Alessandro Scolaro

The prediction of departure from nucleate boiling (DNB) has always been a crucial aspect of thermal-hydraulic codes for the analysis of Light Water Reactors. In this paper, GeN-Foam, a multi-physics code developed based on OpenFOAM, has been enhanced to in ...

Elsevier Science Sa2023

Validation of spent nuclear fuel decay heat calculations using Polaris, ORIGEN and CASMO5

Andreas Pautz, Dimitri Rochman, Stefano Caruso, Ahmed Salaheldin Ahmed Shama

Decay heat calculations of spent nuclear fuel (SNF) using Polaris and ORIGEN codes in the SCALE code sys-tem, and CASMO5 code, are validated using measurements from the Clab and GE-Morris facilities. Multiple hypothesis testing, relying on permutations and ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Multi-physics modeling of VVERs with high fidelity high-resolution codes

Marianna Papadionysiou

The calculations performed for the design and operation of a Nuclear Power Plant (NPP) are a key factor for their safety analyses. The standard for the computational analysis of NPPs is the so called conventional approach, which relies on coarse mesh diffu ...

EPFL2022

Role of mean stress on fatigue behavior of a 316L austenitic stainless steel in LWR and air environments

Philippe Spätig, Hans-Peter Seifert

Mean stress effects on fatigue life of a stainless steel in air and boiling water reactor (BWR) environments were evaluated by load-controlled tests. In stress-life, non-zero mean stresses increase life in low cycle fatigue regime in both environments and ...

ELSEVIER SCI LTD2021

A Hybrid Approach to Neutron Transport with Thermal-hydraulic Feedback for Reactor Transient Analysis

Alexander Aures

Understanding the time-dependent behaviour of a nuclear reactor following an intended or unintended change of the reactor conditions is of crucial importance to the safe operation of nuclear reactors. Safety evaluations of nuclear reactors involve the anal ...

EPFL2021

Numerical Simulation and Validation of Aerosol Particle Removal by Water Spray Droplets With OpenFOAM During the Fukushima Daiichi Fuel Debris Retrieval

Hui Liang

In the decommissioning of damaged Fukushima Daiichi reactors, the melted and re-solidified fuel debris in the bottom of the reactor pressure vessel and primary containment vessel need to be cut into small pieces before removing them from reactor buildings. ...

2020

Aqueous effluent treatment system

Jeremy Luterbacher, Gaël Peng, Frédéric Edouard Juillard

Aqueous effluent treatment system (2) including a separation reactor (4) having a reactor chamber fluidly connected to an aqueous effluent source (3), connected via a pump (5) to an inlet (34) of the reactor chamber, a fluid extraction system (6) connected ...

2020

Development and verification of pin-by-pin homogenized simplified transport solver Tortin for PWR core analysis

Andreas Pautz, Petra Mala

Currently, the pin-by-pin homogenized solvers are a very active research field as they can, unlike the nodal codes, directly predict the local power, while requiring significantly less computational resources than the heterogeneous transport codes. This pa ...

2020

Loading optimization for Swiss used nuclear fuel assemblies into final disposal canisters

Andreas Pautz, Hakim Ferroukhi, Dimitri Rochman

In this study, an optimization of the canister loading for used nuclear fuels is performed, solely based on their decay heat values. By taking into account the individual irradiation history for each fuel assembly, as well as with a number of assumptions o ...

ELSEVIER SCIENCE SA2020

Direct numerical simulation of phase change in the presence of non-condensable gases

Lubomír Bures

This paper describes a new numerical method for the simulation of phase change phenomena between a liquid and a vapour in the presence of non-condensable gases. The method is based on an interface-tracking approach in the framework of single-fluid modellin ...

2020

Development of Advanced Methodologies for Monitoring and Modelling of Neutron Noise in Modern LWR Cores

Dionysios Chionis

Nuclear reactors are inherently stochastic systems, in which neutronic and thermal-hydraulic parameters fluctuate continuously even during steady-state conditions. In addition, structural components vibrate due to the coolant hydraulic forces. This stochas ...

EPFL2020

On the Number of Containments in P-free Families

Abhishek Methuku

A subfamily {F-1, F-2, ..., F-vertical bar P vertical bar} subset of F is a copy of the poset P if there exists a bijection i : P -> {F-1, F-2, ..., F-vertical bar P vertical bar}, such that p

Springer2019

An integrated concentrated solar fuel generator utilizing a tubular solid oxide electrolysis cell as solar absorber

Sophia Haussener, Meng Lin

We numerically assessed the potential of a solar reactor concept for efficient fuel processing under concentrated solar irradiation. This design integrates a cavity receiver, a tubular solid oxide electrolyzer, and the concentrated photovoltaic cells into ...

2018

Analysis of reactivity worths of burnt PWR fuel samples measured in LWR-PROTEUS Phase II using a CASMO-5 reflected-assembly model

Mathieu Hursin, Hakim Ferroukhi, Daniel Jerôme Siefman

The reactivity loss of PWR fuel with burnup has been investigated experimentally by measuring the reactivity worths of highly-burnt fuel samples in a PWR test lattice in the framework of the LWR-PROTEUS Phase II program. Seven UO2 samples cut from fuel rod ...

2017

Modelling of fuel fragmentation, relocation and dispersal during Loss-of-Coolant Accident in Light Water Reactor

Vladimir Vladimirov Brankov

Recent LOCA tests with high burnup fuel at the OECD Halden Reactor Project and at Studsvik demonstrated the susceptibility of the fuel to fragment to small pieces, to relocate and possibly cause a hot-spot effect and to be dispersed in the event of claddin ...

EPFL2017

Tribocorrosion in Pressurized High-Temperature Water: A Mass Flow Model Based on the Third-Body Approach

Stefano Mischler

Pressurized water reactors (PWR) used for power generation are operated at elevated temperatures (280-300 degrees C) and under high pressure (120-150 bar). In addition to these harsh environmental conditions some components of the PWR assemblies are subjec ...

Springer Verlag2016

Large eddy simulation of particulate flow inside a differentially heated cavity

Michel Deville, Emmanuel Leriche, Christoph Bosshard

In nuclear safety, some severe accident scenarios lead to the presence of fission products in aerosol form in the closed containment atmosphere. It is important to understand the particle depletion process to estimate the risk of a release of radioactivity ...

Elsevier2014

SPBC: Leveraging the Characteristics of MPI HPC Applications for Scalable Checkpointing

André Schiper, Thomas Ropars

The high failure rate expected for future supercomputers requires the design of new fault tolerant solutions. Most checkpointing protocols are designed to work with any message-passing application but suffer from scalability issues at extreme scale. We tak ...

2013

Large Eddy Simulation of Particle Dynamics Inside a Differentially Heated Cavity

Christoph Bosshard

In nuclear safety, most severe accident scenarios lead to the presence of fission products in aerosol form in the closed containment atmosphere. It is important to understand the particle depletion process to estimate the risk of a release of radioactivity ...

EPFL2012