Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Screw

Related publications (17)

Proposed Limits of Stiffener Spacing Requirements for EBF Links Within the Framework of Eurocode 8

Dimitrios Lignos, Nikolaos Skretas

Design specifications for Eccentrically Braced Frames (EBFs) provided by both the current AISC and Eurocode (EC) 8 seismic provisions are primarily based on physical tests conducted in the early 1980s. The tests investigated the behavior of, mostly short, ...

EEME2023

A low-temperature prismatic slip instability in Mg understood using machine learning potentials

William Curtin, Xin Liu, Binglun Yin

Prismatic slip in magnesium at temperatures T

PERGAMON-ELSEVIER SCIENCE LTD2023

Optimization of multi-directional fiber architecture for resistance and ductility of bolted FRP profile joints

Thomas Keller, Lulu Liu

In view of the low structural efficiency of bolted joints in pultruded fiber-reinforced polymer (FRP) profiles with mainly unidirectional (UD) fiber architecture, off-axis plies were considered as an effective way to improve bolted joint performance. An ex ...

ELSEVIER SCI LTD2020

Predrilled locking compression plate is more accurate than tension band wiring in restoring articular geometry of the ulnar greater sigmoid notch after olecranon Chevron osteotomy

Alexandre Terrier, Patrick Goetti, Frédéric Vauclair

Introduction: The olecranon Chevron osteotomy (OCO) is commonly used to approach complex intraarticular fractures of the distal humerus. Predrilled tension band wiring (TBW) has historically been used to fix OCO. However, clinical outcomes are burdened by ...

ELSEVIER SCI LTD2020

A Calculation Method for Interconnected Timber Elements Using Wood-Wood Connections

Yves Weinand, Julien Gamerro, Jean-François Bocquet

Wood-wood connections, widely used in the past, have been progressively replaced by steel fasteners in timber constructions. Currently, they can be manufactured and implemented more efficiently thanks to digital fabrication techniques. In addition, with th ...

2020

Non-setting, injectable biomaterials containing particulate hydroxyapatite can increase primary stability of bone screws in cancellous bone

Dominique Pioletti, Ulrike Kettenberger

BACKGROUND: Fracture fixation in weak bone is still a clinical challenge. Screw augmentation was shown to successfully increase their primary stability. The currently used calcium phosphate or polymeric bone cements, however, present important drawbacks su ...

2018

Restoring Jean Prouvé. The “Buvette” at Evian and other technical objects

Giulia Marino

Completed in 1957, the new buvette (pump room) of the Source Cachat in Evian-les-Bains is to be classed among twentieth-century icons. The building was the outcome of a fruitful partnership be-tween an experienced architect, Maurice Novarina, an “inspired ...

Docomomo International and Docomomo Slovenia2018

Failure of mounting bolt of helicopter main gearbox support strut

Predrag Andric

The mounting bolt of helicopter main gearbox support strut was fractured into two pieces during the flight mission. The fracture occurred at the root of the first engaged thread of the bolt-nut assembly. Visual inspection of the fracture zone revealed crac ...

Elsevier2016

Bonded sleeve connections for joining tubular GFRP beam to steel member: Numerical investigation with experimental validation

Zhujing Zhang, Yu Bai

This paper investigates an innovative bonded sleeve connection for joining tubular GFRP and steel members. Experimental results focused on mechanical responses of beam-to-column specimens using bonded sleeve connections and conventional steel angle connect ...

Elsevier Sci Ltd2016

Variability of the pullout strength of cancellous bone screws with cement augmentation

Dominique Pioletti

Background: orthopaedic surgeons often face clinical situations where improved screw holding power in cancellous bone is needed. Injectable calcium phosphate cements are one option to enhance fixation. Methods: paired screw pullout tests were undertaken in ...

Elsevier2015

Integral Mechanical Attachment for Timber Folded Plate Structures

Christopher Werner Matthias Robeller

Timber folded plate Structures combine the advantages of timber as a construction material, such as its carbon-dioxide storage, low energy production and favorable weight-to-strength ratio, with the structural efficiency and elegance of folded surface stru ...

EPFL2015

Experimental testing and simulation of bolted beam-column connections having thick extended endplates and multiple bolts per row

Alain Nussbaumer, Luís Costa Borges, Gary Scott Prinz, Shyam Khadka

Retrofit of existing steel buildings often requires strengthening of the connection regions. One common connection, the bolted beam-column connection, is often strengthened in design using stiffened extended endplates, or with continuity plates welded betw ...

Elsevier2014

Atomistic simulation of the a(0) < 1 0 0 > binary junction formation and its unzipping in body-centered cubic iron

Seyed Masood Hafez Haghighat

Molecular dynamics simulation is used to study the formation of the a(0) < 1 0 0 > binary dislocation junction in body-centered cubic Fe. Results show that under an applied strain two intersecting 1/2 a(0) < 1 1 1 > dislocations, one mobile edge and one im ...

Pergamon-Elsevier Science Ltd2014

Adjustable fixation system for neurosurgical devices

Jean-Philippe Thiran, Rémi Charrier

The system comprises at least a support (5) to be attached to a patient by fixing means (4), said support having an outer thread (7), a first nut (9) with an inner thread (11 ) cooperating with said outer thread (7) and an anchor having a spherical bottom ...

2012

Injectable calcium phosphate cement for augmentation around cancellous bone screws. In vivo biomechanical studies

Dominique Pioletti, Vincent Stadelmann

In lower cancellous apparent bone density, it can be difficult to achieve adequate screw fixation and hence stable fracture fixation. Different strategies have been proposed, one of them is through augmentation using calcium phosphate cement in the region ...

Elsevier2012

In vivo assessment of local effects after application of bone screws delivering bisphosphonates into a compromised cancellous bone site

Dominique Pioletti, Alireza Roshan Ghias

Background: The primary stability of cancellous screw is difficult to obtain in bone of compromised quality and failure of screw fixation is common. To overcome this problem, it is proposed to locally deliver bisphosphonate from the screw An in vivo valida ...

Elsevier2011

Tightening force and torque of nonlocking screws in a reverse shoulder prosthesis

Dominique Pioletti, Alexandre Terrier, Alain Farron, Francesco Merlini, Miguel Gortchacow

Background. Reversed shoulder arthroplasty is an accepted treatment for glenohumeral arthritis associated to rotator cuff deficiency. For most reversed shoulder prostheses, the baseplate of the glenoid component is uncemented and its primary stability is p ...

Elsevier2010