Mihai Adrian IonescuAdrian M. Ionescu is Full Professor at the Swiss Federal Institute of Technology, Lausanne, Switzerland. He received the B.S./M.S. and Ph.D. degrees from the Polytechnic Institute of Bucharest, Romania and the National Polytechnic Institute of Grenoble, France, in 1989 and 1997, respectively. He has held staff and/or visiting positions at LETI-CEA, Grenoble, France and INP Grenoble, France and Stanford University, USA, in 1998 and 1999. Dr. Ionescu has published more than 600 articles in international journals and conferences. He received many Best Paper Awards in international conferences, the Annual Award of the Technical Section of the Romanian Academy of Sciences in 1994 and the Blondel Medal in 2009 for contributions to the progress in engineering sciences in the domain of electronics. He is the 2013 recipient of the IBM Faculty Award in Engineering. He served the IEDM and VLSI conference technical committees and was the Technical Program Committee (Co)Chair of ESSDERC in 2006 and 2013. He is a member of the SATW. He is director of the Laboratory of Micro/Nanoelectronic Devices (NANOLAB).
Stephan BrunnerTeaching & PhD PhD Students Hugo Jean Elie Chkroun, Nicole Vadot, Oraz Anuaruly, Haomin Sun, Isabel Muzio, Fabien Nicolas Jeanquartier Past EPFL PhD Students Ajay Chandrarajan Jayalekshmi, Arnas Volcokas Past EPFL PhD Students as codirector Xavier Lapillonne, Thibaut Vernay, Julien Stanislas Pierre Dominski, Gabriele Merlo, Emmanuel Lanti, Noé Ohana, Moahan Murugappan Courses Plasma instabilities PHYS-736 To complete the theoretical knowledge acquired before the graduate studies.
Daniel Alexander Florez OrregoExpertise
• Exergy and Energy Integration of Chemical and Industrial Processes• Cogeneration and Polygeneration, Refrigeration and Heat Pumping Systems• Technical, Economic and Environmental Analyses• Refineries, Biorefineries, Fertilizers Complexes, Hydrogen and Synthetic Fuels (SNG, DME, MeOH, FT, H2, Power-to-X)• Second law of Thermodynamics and Irreversible Thermodynamics• Combustion, Heat Transfer, Computational Fluid Dynamics, Reaction design• Modeling and Optimization of Energy Conversion Systems• Ma
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Nadine BalucTeaching & PhD Past EPFL PhD Students Emmanuelle Giacometti, Raluca Schibli, Gang Yu, Bin Long, Lyubomira Veleva
Christophe BallifChristophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.
Rüdiger UrbankeRüdiger L. Urbanke obtained his Dipl. Ing. degree from the Vienna University of Technology, Austria in 1990 and the M.Sc. and PhD degrees in Electrical Engineering from Washington University in St. Louis, MO, in 1992 and 1995, respectively. He held a position at the Mathematics of Communications Department at Bell Labs from 1995 till 1999 before becoming a faculty member at the School of Computer & Communication Sciences (I&C) of EPFL. He is a member of the Information Processing Group. He is principally interested in the analysis and design of iterative coding schemes, which allow reliable transmission close to theoretical limits at low complexities. Such schemes are part of most modern communications standards, including wireless transmission, optical communication and hard disk storage. More broadly, his research focuses on the analysis of graphical models and the application of methods from statistical physics to problems in communications. From 2000-2004 he was an Associate Editor of the IEEE Transactions on Information Theory and he is currently on the board of the series "Foundations and Trends in Communications and Information Theory." In 2017 he was President of the Information Theory Society. From 2009 till 2012 he was the head of the I&C doctoral school, in 2013 he served as Dean a. i. of I&C, and since 2016 he is the Associated Dean for teaching of I&C. He is a co-author of the book "Modern Coding Theory" published by Cambridge University Press. Awards: 2021 IEEE Information Theory Society Paper Award 2016 STOC Best Paper Award 2014 La Polysphere Teaching Award 2014 IEEE Hamming Medal 2013 IEEE Information Theory Society Paper Award 2011 MASCO Best Paper Award 2011 IEEE Koji Kobayashi Award 2009 La Polysphere Teaching Award 2002 IEEE Information Theory Society Paper Award Fulbright Scholarship My students have won the following awards: M. Mondelli, 2021 IEEE Information Theory Paper Award M. Mondelli, EPFL Doctorate Award 2018 M. Mondelli, Patrick Denantes Award, 2017 M. Mondelli, IEEE IT Society Student Paper Award at ISIT, 2015 M. Mondelli, Dan David Prize Scholarship, 2015 H. Hassani, Inaugural Thomas Cover Dissertation Award, 2014 S. Kudekar, 2013 & 2021 IEEE Information Theory Paper Award A. Karbasi, Patrick Denantes Award, 2013 V. Venkatesan, Best Paper Award at MASCOTS, 2011 A. Karbasi, Best Student Paper Award at ICASSP, 2011 (with R. Parhizkar) A. Karbasi, Best Student Paper Award at ACM SIGMETRICS, 2010 (with S. Oh) S. Korada, ABB Dissertation Award, 2010 S. Korada, IEEE IT Society Student Paper Award at ISIT, 2009 (with E. Sasoglu) S. Korada, IEEE IT Society Student Paper Award at ISIT, 2008
Marie Estelle Solange ViolayExpertise
-Rock mechanics-Rock physics-Fault and earthquake mechanics-Hydro-mechanical couplings
Teaching & PhD PhD Students Cindy Mikaelian, Francesco Lazari, Franco Matías Robbiano Muñoz, Karin Andrea Hofer Apostolidis, Andrea Mazzeo Past EPFL PhD Students Felipe Orellana, Mateo Acosta, Chiara Cornelio, Corentin Noël, Federica Paglialunga, Antoine Guggisberg Courses Designing Testing Machines for Geomechanics ME-700 Develop your own machines to meet your scientific needs. Learn how to bu
Andreas ZüttelTeaching & PhD PhD Students Boyu Ouyang, Wai Kwan Liu, Guillaume Bérenger Rod, Aleksandar Mihaylov Mikov, Rui Li, Akhil Varma Penmathsa Past EPFL PhD Students Robin Tobias Andreas Mutschler, Kun Zhao, Loris Giovanni Lombardo, Mo Li, Jie Zhang, Youngdon Ko, Cedric David Koolen, Thi Ha My Pham, Zohreh Akbari, Yasemen Kuddusi Courses Thermodynamics of energy conversion and storage ChE-414 The course is an introduction to the energy conversion. It focusseson the thermodynamics of the engines a
