Publications related to Metamorphism

Related publications (30)

Diffusion timescale conundrum in contact metamorphism: Oxygen isotope and trace element profiles in dolomite

Anders Meibom, Stéphane Laurent Escrig, Lukas Baumgartner

Successful application of diffusion chronometry is based on detailed knowledge of diffusion parameters obtained from laboratory experiments, which also need to be upscaled to be applied to natural samples. While generally applicable, several examples of di ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Simple shear extrusion versus equal channel angular pressing: A comparative study on the microstructure and mechanical properties of an Mg alloy

Roland Logé, Cyril Cayron, Aryan Rezaei Rad

Two severe plastic deformation (SPD) techniques of simple shear extrusion (SSE) and equal channel angular pressing (ECAP) were employed to process an extruded Mg -6Gd -3Y -1.5Ag (wt%) alloy at 553 K for 1, 2, 4 and 6 passes. The microstructural evolutions ...

KEAI PUBLISHING LTD2023

Nanotwinning-assisted recrystallization

Roland Logé

Dynamic recrystallization helps to refine grain structures in metals and tune their properties. Confining recrystallization within prior nanoscale twinning provides a path for reaching exceptional grain refinement. ...

NATURE PORTFOLIO2022

Oxygen diffusion in garnet: Experimental calibration and implications for timescales of metamorphic processes and retention of primary O isotopic signatures

Anders Meibom, Stéphane Laurent Escrig

Knowledge of oxygen diffusion in garnet is crucial for a correct interpretation of oxygen isotope signatures in natural samples. A series of experiments was undertaken to determine the diffusivity of oxygen in garnet, which remains poorly constrained. The ...

MINERALOGICAL SOC AMER2022

Composition and Pressure Effects on Partitioning of Ferrous Iron in Iron-Rich Lower Mantle Heterogeneities

Marco Cantoni, Philippe Gillet, James Badro, Farhang Nabiei, Susannah McGregor Dorfman, Charles-Edouard Boukaré

Both seismic observations of dense low shear velocity regions and models of magma ocean crystallization and mantle dynamics support enrichment of iron in Earth’s lowermost mantle. Physical properties of iron-rich lower mantle heterogeneities in the modern ...

2021

Microstructural Evolution Study of Fe-Mn-Al-C Steels Through Variable Thermomechanical Treatments

Roland Logé

The microstructural evolution of the two austenitic alloys Fe-20Mn-3Al-0.7C wt pct and Fe-20Mn-6Al-0.7C wt pct when different thermal and thermomechanical treatments are performed has been studied. To this end, a generic industrial die of 100 ton capacity ...

SPRINGER2021

On the effects of fluid pressure variations on rock-mass and fault mechanical behaviour

Corentin Jean-Marie Rémi Noël

In the past 20 years, the growing interest in deep geo-reservoirs for purposes such as carbon storage, waste water disposal, or geothermal energy exploitation have led to large-volume fluid injections into the upper continental crust. These fluid injection ...

EPFL2021

Stability of hydrate assemblages and properties of cementitious systems with higher alumina content

Natechanok Chitvoranund

Two low CO2 cement systems are investigated: one made with the use of supplementary cementitious materi-als (SCMs) (metakaolin and limestone) and the other an alternative binder, calcium sulfoaluminate cement (CSA). These two low CO2 cements contain a simi ...

EPFL2021

Influence of Joule Effect Heating on Recrystallization Phenomena in Inconel 718

Roland Logé, Mathijs Pieter van der Meer

In this article, the Joule effect heating influence on recrystallization phenomena in the Inconel 718 nickel-based superalloy is investigated in details. On the one hand, static recrystallization kinetic studies at 1020 degrees C after cold deformation up ...

SPRINGER2021

A critical assessment of experimental investigation of dynamic recrystallization of metallic materials

Roland Logé, Ke Huang

Dynamic recrystallization (DRX) often takes place during hot deformation of metallic materials, which then exerts significant influence on the final microstructures and mechanical properties of the formed components. A considerable number of published pape ...

2020

Dynamic recrystallization study of a Fe-Mn-Si based shape memory alloy in constant and variable thermomechanical conditions

Roland Logé

The dynamic recrystallization of a Fe-Mn-Si based shape memory is studied for the first time, under constant and variable thermo-mechanical conditions. The effect of strain rate and deformation temperature on the microstructural evolution is investigated, ...

ELSEVIER SCIENCE INC2019

Shock-produced high-pressure (La, Ce, Th)PO4 polymorph revealed by microstructural phase heritage of monazite

Cyril Cayron

The responses of uranium-bearing accessory minerals to shock metamorphism have received growing interest, because under extreme pressure and temperature conditions, these phases can form unique microstructures and/or polymorphs and their radiometric ages c ...

GEOLOGICAL SOC AMER, INC2019

Chemical shrinkage of ye'elimite with and without gypsum addition

Karen Scrivener, Mohsen Ben Haha, Frank Bullerjahn

Ye'elimite (Ca4Al6O12SO4 or C(4)A(3)S) is the main hydraulic mineral present in calcium sulphoaluminate cement (CSA). Its reaction is responsible for the (early) hydration and associated cement properties such as the chemical shrinkage. This paper discusse ...

ELSEVIER SCI LTD2019

Dissolution-reprecipitation reaction of dolomite: investigation of self- and tracer-diffusion using SIMS mini-spot and NanoSIMS profiles

Anders Meibom, Stéphane Laurent Escrig, Lukas Baumgartner

Recrystallization of minerals due to fluid infiltration modifies their original chemical and isotopic signature. Such processes are sought after as they give access to timescales of geologic processes, which are commonly quantified using diffusion chronome ...

2019

Pore space properties in carbonate fault rocks of peninsular Italy

Marie Estelle Solange Violay

The fault cores of extensional faults in Mesozoic limestones and dolostones are examined by mean of combined microstructural, ultrasonic and petrophysical analyses. Grain-supported fault rocks commonly localize in the outer fault cores, whereas matrix-supp ...

2019

Impacting factors and properties of limestone calcined clay cements (LC3)

Karen Scrivener, Franco Alberto Zunino Sommariva, François Henri Avet, Julien Ston, Aurélie Rosine Favier, Hamed Maraghechi, Wilasinee Hanpongpun

This paper details the main factors influencing the performance of limestone calcined clay cements (LC3). The kaolinite content plays a major role in the rheological properties as well as strength development. Even in the presence of secondary phases, kaol ...

ICE PUBLISHING2019

Reactivity and Performance of Limestone Calcined-Clay Cement (LC3) Cured at Low Temperature

Karen Scrivener, Franco Alberto Zunino Sommariva

Limestone calcined-clay cements (LC3) take advantage of the synergetic effects of calcium carbonate reaction with the additional aluminium provided by the calcined clay. As temperature decreases, calcium carbonate solubility increase, therefore, the early- ...

SPRINGER2018

Frictional and transport properties of faults zones in the Opalinus Clay formation

Luis Felipe Orellana Espinoza

Deep geological repositories in clay formations are a promising option to ensure the long-term isolation of nuclear waste from the population and the environment. In Switzerland, the Opalinus Clay (OPA) formation is a shale whose favorable barrier properti ...

EPFL2018

Effects of the Anisotropy of the Fault Zone Permeability on the Timing of Triggered Earthquakes: Insights from 3D-Coupled Fluid Flow and Geomechanical Deformation Modeling

Claudia Maria Colciago

In the last years, numerous seismological evidences have shown a strict correlation between fluid injection and seismicity. An important topic that is currently under discussion in the scientific community concerns the prediction of the earthquake magnitud ...

SPRINGER BASEL AG2018

Influence Grinding Procedure, Limestone Content and PSD of Components on Properties of Clinker-Calcined Clay-Limestone Cements Produced by Intergrinding

Karen Scrivener, Albert Perez, Aurélie Rosine Favier

This paper looks at the study of intergrinding for the production of ternary cement based on clinker, calcined clay, limestone and gypsum with 50% of clinker substitution (LC3). The impact of grinding time on clinker, limestone and calcined clay PSD, and h ...

Springer2018