Concept

Electron affinity

The electron affinity (Eea) of an atom or molecule is defined as the amount of energy released when an electron attaches to a neutral atom or molecule in the gaseous state to form an anion. X(g) + e− → X−(g) + energy This differs by sign from the energy change of electron capture ionization. The electron affinity is positive when energy is released on electron capture. In solid state physics, the electron affinity for a surface is defined somewhat differently (see below). This property is used to measure atoms and molecules in the gaseous state only, since in a solid or liquid state their energy levels would be changed by contact with other atoms or molecules. A list of the electron affinities was used by Robert S. Mulliken to develop an electronegativity scale for atoms, equal to the average of the electrons affinity and ionization potential. Other theoretical concepts that use electron affinity include electronic chemical potential and chemical hardness. Another example, a molecule or atom that has a more positive value of electron affinity than another is often called an electron acceptor and the less positive an electron donor. Together they may undergo charge-transfer reactions. To use electron affinities properly, it is essential to keep track of sign. For any reaction that releases energy, the change ΔE in total energy has a negative value and the reaction is called an exothermic process. Electron capture for almost all non-noble gas atoms involves the release of energy and thus is exothermic. The positive values that are listed in tables of Eea are amounts or magnitudes. It is the word "released" within the definition "energy released" that supplies the negative sign to ΔE. Confusion arises in mistaking Eea for a change in energy, ΔE, in which case the positive values listed in tables would be for an endo- not exo-thermic process. The relation between the two is Eea = −ΔE(attach). However, if the value assigned to Eea is negative, the negative sign implies a reversal of direction, and energy is required to attach an electron.

Official source

https://en.wikipedia.org/wiki/Electron_affinity

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related courses (32)

CH-110: Advanced general chemistry I

Le cours comporte deux parties. Les bases de la thermodynamique des équilibres et de la cinétique des réactions sont introduites dans l'une d'elles. Les premières notions de chimie quantique sur les électrons et les liaisons chimiques, exemplifiées en chim ...

MSE-101(a): Materials:from chemistry to properties

Ce cours permet l'acquisition des notions essentielles relatives à la structure de la matière, aux équilibres et à la réactivité chimique en liaison avec les propriétés mécaniques, thermiques, électriques et magnétiques des matériaux. ...

MSE-304: Surfaces and interfaces

This lecture introduces the fundamental concepts for describing, characterizing, and engineering surfaces and interfaces. Students will develop both theoretical and practical understanding of how interfacial phenomena influence surface properties and techn ...

Related lectures (32)

Periodic Trends and Exceptions

Explores periodic trends, exceptions to the Aufbau principle, and the variations in element properties across the periodic table.

Electron Transfer Theory

Explores Electron Transfer Theory, covering electron tunneling, the Gerischer model, and charge transfer.

Atomic Structure: Trends and Properties

Explores atomic structure properties and trends across the periodic table.

Related publications (13)

Electron–electrolyte coupling in AC transport through nanofluidic channels

The transport properties of nanofluidic channels are usually studied under constant (DC) voltage or pressure driving. However, the frequency response under sinusoidal (AC) drivings offers rich insights into the time-dependent transport mechanisms. Inspired by recent electrochemical approaches, we investigate the couplings between ionic and electronic transport under AC driving. We show that conduction electrons of the channel walls participate in ionic current via capacitive electrochemical coupling, defini

AIP Publishing2026

Extraction of the self energy and Eliashberg function from angle resolved photoemission spectroscopy using the xARPES code

Angle-resolved photoemission spectroscopy is a powerful experimental technique for studying anisotropic many-body interactions through the electron spectral function. Existing attempts to decompose the spectral function into non-interacting dispersions and electron-phonon, electron-electron, and electron-impurity self-energies rely on linearization of the bands and manual assignment of self-energy magnitudes. Here, we show how self-energies can be extracted consistently for curved dispersions. We extend the

Springer Science and Business Media LLC2026

Quantification of Mn(III)-Oxide Redox Activity: Integrating Mediated Electrochemistry with Kinetic and Mass-Transport Modelling

Predicting the outcomes of redox processes in aquatic environments requires quantitative constraints on electron transfer reactions. Advances in electrochemical techniques have significantly improved our ability to quantify and constrain mineral-related biogeochemical redox processes that regulate carbon, nutrient, and contaminant cycling in aquatic environments. Manganese oxides are key redox-active minerals in these systems that influence organic matter transformation, nutrient availability, and contamina

2026

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Official source

https://en.wikipedia.org/wiki/Electron_affinity

About this result

Related courses (32)

CH-110: Advanced general chemistry I

MSE-101(a): Materials:from chemistry to properties

MSE-304: Surfaces and interfaces

Related lectures (32)

Periodic Trends and Exceptions

Explores periodic trends, exceptions to the Aufbau principle, and the variations in element properties across the periodic table.

Electron Transfer Theory

Explores Electron Transfer Theory, covering electron tunneling, the Gerischer model, and charge transfer.

Atomic Structure: Trends and Properties

Explores atomic structure properties and trends across the periodic table.

Related publications (13)

Electron–electrolyte coupling in AC transport through nanofluidic channels

AIP Publishing2026

Extraction of the self energy and Eliashberg function from angle resolved photoemission spectroscopy using the xARPES code

Springer Science and Business Media LLC2026

Quantification of Mn(III)-Oxide Redox Activity: Integrating Mediated Electrochemistry with Kinetic and Mass-Transport Modelling

2026

Related people (25)

Rizlan Bernier-Latmani

HIGHER EDUCATION Summer course: Advances in Genome Technology and Bioinformatics Course at the Marine Biology Laboratory in Woods Hole, MA. October 2005. Ph.D. 2001 Civil and Environmental Engineering, Stanford University, CA (Advisor, Jim Leckie, Biodegradation of uranyl (UO22 )-complexed citrate and implications for uranyl mobility in the subsurface) M.S. 1995 Civil and Environmental Engineering, Stanford University, CA B.S. 1993 Natural Resources with Honors, Cornell University, Ithaca, NY PROFESSIONAL EMPLOYMENT 2013-present Associate professor with tenure, School of Architecture, Civil and Environmental Engineering, Swiss Federal Institute of Technology, Lausanne 2005-2013 Assistant professor tenure track, School of Architecture, Civil and Environmental Engineering, Swiss Federal Institute of Technology, Lausanne 2001-2005 Post-Graduate Researcher, Scripps Institution of Oceanography, La Jolla, CA (PI: Brad Tebo) 1995-2001 Graduate Research Assistant, Stanford University (Advisor: Jim Leckie) RESEARCH INTERESTS Gemicrobiology, metal-bacteria interactions, biological reduction and oxidation of metals, biological nanoparticle formation; Characterization of microbial communities in terrestrial environments; Using genomic, microscopic and spectroscopic tools to understand metal transformations by microorganisms. ACADEMIC HONORS Rotary Foundation University Professor grant, 2004. Swiss National Science Foundation Post-doctoral Fellowship, 2001. Leon B. Reynolds Memorial Scholarship in the School of Engineering at Stanford University, 1995-96. Graduated with Honors from Cornell University, 1993. BIBLIOMETRY http://www.researcherid.com/rid/E-4398-2011 ResearcherID: E-4398-2011

Henning Paul-Julius Stahlberg

Mission We use high-resolution cryo-electron microscopy to study neurodegeneration and other protein systems. We also develop novel imaging technology in the areas of electron microscopy hardware and applications, sample preparation, data collection schemes, and data analysis software systems. The Stahlberg group is supported by the University of Lausanne, Faculty of Medicine and Biology, and by the EPFL, Faculty of Basic Sciences, Physics Institute. The LBEM is a research laboratory of both UNIL and EPFL.

Yury Tsybin

Christophe Ballif

Christophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.

Olivier Sauter

Teaching & PhD PhD Students Cassandre Ekta Contré, Antonia Frank, Peizheng Zhang, Jean-Pierre Thomas Svantner, Cristina Venturini, Cosmas Quirin Lorenz Heiss, Daniel Perales Rios, Viacheslav Bochkarev, Jan Jakub Frybes, Paul Véronique Guillaume Devianne Past EPFL PhD Students Clemente Angioni, Petri Nikkola, Alberto Bottino, Andrei Martynov, Emiliano Fable, Costanza Zucca, Federico Felici, Dávid Wágner, Doohyun Kim, Anna Teplukhina, Mengdi Kong, Francesco Carpanese, Simon Van Mulders, Stefano Marchioni, F

Christoph Hollenstein

Arianna Marchioro

Education PhD Thesis | Interfacial Charge Transfer Dynamics in Solid-State Hybrid Organic-Inorganic Solar Cells 2010 – 2014 EPFL Directed by Prof. J.-E. Moser and Prof. M. Grätzel MSc in Molecular and Biological Chemistry | 2008 – 2010 EPFL and Imperial College London (exchange program) BSc in Chemistry | 2005 – 2008 EPFL Professionals experiences Postdoctoral Research Associate 2014–2016 University of Washington, Seatt

Cécile Hébert

Cécile Hébert was born in France in 1970. She obtained her Ingeneer degree (physics) and her PhD degree (design of a new energy filter for transmission electron microscopy, under the direction of Prof. B. Jouffrey) at the Ecole Centrale in Paris. As a post doc with Prof. P. Schattschneider, she was working on the calculation of the fine structure of ionisation edges in EELS. As a research assistant at the Vienna University of Technology, she was one of the main participant to the CHIRALTEM project dealing with the measurement of magnetic circular dichroism in the electron microscope.

Frank Nüesch

Teaching & PhD PhD Students Elodie Didier, Ceren Mitmit, João Pedro Ferreira Assunção, Vahid Charkhesht Past EPFL PhD Students Hui Zhang, Simon Johannes Dünki, Yee Song Ko, Lei Wang, Sandra Christina Jenatsch, Nicolas Alexandre Serge Leclaire, Donatas Gesevicius, Surendra Babu Anantharaman, Markus Regnat, Philip Horst Caspari, Patrik Schürch, David Reber, Karen Verena Strassel, Sina Abdolhosseinzadeh, Matthias Diethelm, Francis Owusu, Camilla Arietta Vael-Garn, Yeerlan Adeli, Wei-Hsu Hu, Cansu Zeytun Kara

Georg Fantner

Related units (16)

Chair of Atomic Scale Simulation

ISIC - Divers

Laboratory of Photonics and Interfaces

Related concepts (22)

Electron shell

In chemistry and atomic physics, an electron shell may be thought of as an orbit that electrons follow around an atom's nucleus. The closest shell to the nucleus is called the "1 shell" (also called the "K shell"), followed by the "2 shell" (or "L shell"), then the "3 shell" (or "M shell"), and so on farther and farther from the nucleus. The shells correspond to the principal quantum numbers (n = 1, 2, 3, 4 ...) or are labeled alphabetically with the letters used in X-ray notation (K, L, M, ...).

Fluorine

Fluorine is a chemical element with the symbol F and atomic number 9. It is the lightest halogen and exists at standard conditions as a highly toxic, pale yellow diatomic gas. As the most electronegative reactive element, it is extremely reactive, as it reacts with all other elements except for the light inert gases. Among the elements, fluorine ranks 24th in universal abundance and 13th in terrestrial abundance.

Valence electron

In chemistry and physics, a valence electron is an electron in the outer shell associated with an atom, and that can participate in the formation of a chemical bond if the outer shell is not closed. In a single covalent bond, a shared pair forms with both atoms in the bond each contributing one valence electron. The presence of valence electrons can determine the element's chemical properties, such as its valence—whether it may bond with other elements and, if so, how readily and with how many.

Related exercises (1)

Discussion

You heard about electrons and point charges in the lecture. Explain in your own words what an electron and what a point charge is and what their respective properties are. What is the difference and what are the similarities of electrons and point charges? An electron is an elementary physical particle carrying negative charge (u2005−u20051.602u2005⋅u200510⁻¹⁹ C) in an atom. It is the lightest particle carrying charge. Apart from charge an electron has a mass but not a distinguishable radius (often an exper

Related notebooks (5)

Density of States in 2D Systems

This notebook shows evolution of density of states g(E) in 2D by considering all allowed stated in an electron shell between consequtive kx values (n and n+1). The three graphs presented are electron energy dispersion (left), allowed k states for a particular k shell (center) and the density of states g(E) (right)."

Understanding Hund s Rules

numbers

S

L

and

J

of an isolated atom or ion from its electronic configuration. Considering a partially filled electronic shell, the following three rules have to be applied in the order given below: 1. The total spin angular momentum

S=\Sigma|m_s|

takes its maximum possible value; 2. The total orbital angular momentum

L=\Sigma|m_l|

is maximized; 3. For more than half-filled shell, the total angular momentum number

J=L+S

, otherwise

J=\vert L-S \vert

. The sl

Calculation and plotting of some important quantities relative to the electron s properties in a conventional TEM

::: {role="main"} ::: {.jp-Cell .jp-MarkdownCell .jp-Notebook-cell} ::: {.jp-Cell-inputWrapper tabindex="0"} ::: {.jp-Collapser .jp-InputCollapser .jp-Cell-inputCollapser} ::: ::: {.jp-InputArea .jp-Cell-inputArea} ::: {.jp-InputPrompt .jp-InputArea-prompt} ::: ::: {.jp-RenderedHTMLCommon .jp-RenderedMarkdown .jp-MarkdownOutput mime-type="text/markdown"} A typical TEM works with acceleration voltages between 80 and 300 kV ::: ::: ::: ::: ::: {.jp-Cell .jp-CodeCell .jp-Notebook-cell .jp-mod-noOutputs} ::

Simulating Electron Motion in 2D Materials Using the Drude Model - Basic

Drude model considers electrons small solid particles traveling through lattices as a stationary array of heavier and bigger atoms. The model use "mean free time" as a measure of the frequency an electron gets scattered. This jupyter notebook makes use of this concept and uses stochastic method to simulat electrons traveling through a 2D material of finite width but infinite length."

"#### First we setup the simulation parameters such as the external electric field, number of electrons (default

Simulating Electron Motion in 2D Materials Using the Drude Model - Advanced

Drude model considers electrons small solid particles traveling through lattices as a stationary array of heavier and bigger atoms. The model use "mean free time" as a measure of the frequency an electron gets scattered. This jupyter notebook makes use of this concept and uses stochastic method to simulate electrons traveling through a 2D material of finite width but infinite length."

First we setup the simulation parameters such as the external electric field, number of electrons (default to 1)