Dario FloreanoProf. Dario Floreano is director of the Laboratory of Intelligent Systems at the Swiss Federal Institute of Technology Lausanne (EPFL). Since 2010, he is the founding director of the Swiss National Center of Competence in Robotics, a research program that brings together more than 20 labs across Switzerland. Prof. Floreano holds an M.A. in Vision, an M.S. in Neural Computation, and a PhD in Robotics. He has held research positions at Sony Computer Science Laboratory, at Caltech/JPL, and at Harvard University. His main research interests are Robotics and A.I. at the convergence of biology and engineering. Prof. Floreano made pioneering contributions to the fields of evolutionary robotics, aerial robotics, and soft robotics. He served in numerous advisory boards and committees, including the Future and Emerging Technologies division of the European Commission, the World Economic Forum Agenda Council, the International Society of Artificial Life, the International Neural Network Society, and in the editorial committee of several scientific journals. In addition, he helped spinning off two drone companies (senseFly.com and Flyability.com) and a non-for-profit portal on robotics and A.I. (RoboHub.org). Books
Manuale sulle Reti Neurali, il Mulino (in Italian), 1996 (first edition), 2006 (second edition)Evolutionary Robotics, MIT Press, 2000
Bio-Inspired Artificial Intelligence, MIT Press, 2008
Flying Insects and Robots, Springer Verlag, 2010
Olivier MartinOlivier J.F. Martin received the M.Sc. and Ph.D. degrees in physics in 1989 and 1994, respectively, from the Swiss Federal Institute of Technology, Lausanne (EPFL), Switzerland. In 1989, he joined IBM Zurich Research Laboratory, where he investigated thermal and optical properties of semiconductor laser diodes. Between 1994 and 1997 he was a research staff member at the Swiss Federal Institute of Technology, Zurich (ETHZ). In 1997 he received a Lecturer fellowship from the Swiss National Science Foundation (SNSF). During the period 1996-1999, he spent a year and a half in the U.S.A., as invited scientist at the University of California in San Diego (UCSD). In 2001 he received a Professorship grant from the SNSF and became Professor of Nano-Optics at the ETHZ. In 2003, he was appointed Professor of Nanophotonics and Optical Signal Processing at the Swiss Federal Institute of Technology, Lausanne (EPFL), where he is currently head of the Nanophotonics and Metrology Laboratory and Director of the Microengineering Section.
Dimitrios LignosProf. Lignos joined the École Polytechnique Féderale de Lausanne (EPFL) in 2016 from McGill University in Canada where he was a tenured Associate Professor and a William Dawson Scholar for Infrastructure Resilience. He holds a diploma (National Technical University of Athens, NTUA, 2003), M.S. (Stanford University, 2004) and Ph.D. (Stanford University, 2008). In addition, he was a post-doctoral scientist at Stanford University (2009) and in Kyoto University (2010). Prof. Lignos teaches graduate and undergraduate courses in seismic design, nonlinear behaviour of steel and composite structures as well as supplemental damping systems, Structural Stability, Nonlinear Analysis and Performance-based Earthquake Engineering. His awards for teaching, research and service in Civil Engineering include the 2011 Outstanding Teaching Award (Faculty of Engineering, McGill University), as well as the Outstanding reviewer (2012, 2013) award from ASCE, the 2013 State-of-the-Art in Civil Engineering Award by ASCE and the 2014 Christophe Pierre Award for Research Excellence - Early Career. Just recently, he received the 2019 Walter L. Huber Civil Engineering Research Prize from ASCE for significant contributions in developing state of the art methods to simulate extreme limit states in steel structures.Prof. Lignos is a member of ASCE and the Earthquake Engineering Research Institute. He acts as an Associate Editor for Metal Structures and Seismic Effects of the ASCE Journal of Structural Engineering. He joined the Editorial Board of Earthquake Spectra and Earthquake Engineering and Structural Dynamics International journals. He serves as an acting member of the CEN/TC 250/SC 8/WG 2 and has been selected as a member of the Project Team (PT2) for the Eurocode 8-Part 1 Current Revisions for Steel and Composite Structures. He is also a member of the Canadian Standards Association (CSA) S16 technical committee for Steel Structures. Prof. Lignos is involved as a NEHRP consultant in numerous research-to-practice projects related to the behaviour and nonlinear modelling and analysis of structures applicable to the engineering practice through the Applied Technology Council (ATC). Detailed Curriculum Vitae (last update September 2018)
Karim AchouriTeaching & PhD PhD Students Mahmoud Abouelatta, Hossein Allahverdizadeh, Mustafa Yücel Courses Applied Electromagnetics for Metamaterial Design MICRO-449 This course provides the students with the appropriate electromagnetics foundation to understand, model and design metamaterials, especially two-dimensional electromagnetic and optical structures such as metasurfaces. This course covers concepts that apply to both the microwave and optical regimes. Optical engineering (for MT) M
Auke IjspeertAuke Ijspeert is a full professor at the EPFL, and head of the Biorobotics Laboratory (BioRob). He has a B.Sc./M.Sc. in physics from the EPFL (1995), and a PhD in artificial intelligence from the University of Edinburgh (1999). He carried out postdocs at IDSIA and EPFL, and at the University of Southern California (USC). He then became a research assistant professor at USC, and an external collaborator at ATR (Advanced Telecommunications Research institute) in Japan. In 2002, he came back to the EPFL as an SNF assistant professor. He was promoted to associate professor in October 2009 and to full professor in April 2016. His primary affiliation is with the Institute of Bioengineering, and secondary affiliation with the Institute of Mechanical Engineering. His research interests are at the intersection between robotics, computational neuroscience, nonlinear dynamical systems, and machine learning. He is interested in using numerical simulations and robots to get a better understanding of sensorimotor coordination in animals, and in using inspiration from biology to design novel types of robots and adaptive controllers. (see for instance Ijspeert et al Science 2007, Ijspeert Science 2014, and Nyakatura et al Nature 2019). He is also investigating how to assist people with limited mobility using exoskeletons and assistive furniture. He is regularly invited to give talks on these topics (e.g. TED talk given at TED Global Geneva, Dec 8 2015). With his colleagues, he has received paper awards at ICRA2002, CLAWAR2005, IEEE Humanoids 2007, IEEE ROMAN 2014, CLAWAR 2015, SAB2018, and CLAWAR 2019. He is an IEEE Fellow, member of the Board of Reviewing Editors of Science magazine, and associate editor for the IEEE Transactions on Medical Robotics and Bionics and for the International Journal of Humanoid Robotics. He has acted as an associate editor for the IEEE Transactions on Robotics (2009-2013) and for Soft Robotics (2018-2021). He was a guest editor for the Proceedings of IEEE, IEEE Transactions on Biomedical Engineering, Autonomous Robots, IEEE Robotics and Automation Magazine, and Biological Cybernetics. He has been the organizer of 7 international conferences (BioADIT2004, SAB2004, AMAM2005, BioADIT2006, LATSIS2006, SSRR2016, AMAM2019), and a program committee member of over 50 conferences.
Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) Jan SkaloudExpertise
Satellite positioning, inertial and integrated navigation Sensor orientation and calibration, attitude determination Mobile mapping, airborne laser scanning Adjustment methods, Kalman Filtering
Mission
Teaching in 3 EPFL sections and 2 faculties, director of ESO lab.
Books / Monographs J. Skaloud and M. Cramer, «Data Capture,» in GIS Handbook, W. Kresse and D. Danko, Eds. Springer, 2011. D. Lichti and J. Skaloud, «Registration and Calibration,» in Airborne and terrestrial laser scanning, H.-G. Ma
Martin VetterliMartin Vetterli was appointed president of EPFL by the Federal Council following a selection process conducted by the ETH Board, which unanimously nominated him.
Professor Vetterli was born on 4 October 1957 in Solothurn and received his elementary and secondary education in Neuchâtel Canton. He earned a Bachelor’s degree in electrical engineering from ETH Zurich (ETHZ) in 1981, a Master’s of Science degree from Stanford University in 1982, and a PhD from EPFL in 1986. Professor Vetterli taught at Columbia University as an assistant and then associate professor. He was subsequently named full professor in the Department of Electrical Engineering and Computer Sciences at the University of California at Berkeley before returning to EPFL as a full professor at the age of 38. He has also taught at ETHZ and Stanford University.
Professor Vetterli has earned numerous national and international awards for his research in electrical engineering, computer science and applied mathematics, including the National Latsis Prize in 1996. He is a fellow of both the Association for Computing Machinery and the Institute of Electrical and Electronics Engineers and a member the US National Academy of Engineering. He has published over 170 articles and three reference works.
Professor Vetterli’s work on the theory of wavelets, which are used in signal processing, is considered to be of major importance by his peers, and his areas of expertise, including image and video compression and self-organized communication systems, are central to the development of new information technologies. As the founding director of the National Centre of Competence in Research on Mobile Information and Communication Systems, Professor Vetterli is a staunch advocate of transdisciplinary research.
Professor Vetterli knows EPFL inside and out. An EPFL graduate himself, he began been teaching at the school in 1995, was vice president for International Affairs and then Institutional Affairs from 2004 to 2011, and served as dean of the School of Computer and Communication Sciences in 2011 and 2012. In addition to his role as president of the National Research Council of the Swiss National Science Foundation, a position he held from 2013 to 2016, he heads the EPFL’s Audiovisual Communications Laboratory (LCAV) since 1995.
Professor Vetterli has supported more than 60 students in Switzerland and the United States in their doctoral work and makes a point of following their highly successful careers, whether it is in the academic or business world.
He is the author of some 50 patents, some of which were the basis for start-ups coming out of his lab, such as Dartfish and Illusonic, while others were sold (e.g. Qualcomm) as successful examples of technology transfer. He actively encourages young researchers to market the results of their work.
Pascal FuaPascal Fua received an engineering degree from Ecole Polytechnique, Paris, in 1984 and the Ph.D. degree in Computer Science from the University of Orsay in 1989. He then worked at SRI International and INRIA Sophia-Antipolis as a Computer Scientist. He joined EPFL in 1996 where he is now a Professor in the School of Computer and Communication Science and heads the Computer Vision Laboratory. His research interests include shape modeling and motion recovery from images, analysis of microscopy images, and Augmented Reality. His research interests include shape modeling and motion recovery from images, analysis of microscopy images, and machine learning. He has (co)authored over 300 publications in refereed journals and conferences. He is an IEEE Fellow and has been an Associate Editor of IEEE journal Transactions for Pattern Analysis and Machine Intelligence. He often serves as program committee member, area chair, and program chair of major vision conferences and has cofounded three spinoff companies (Pix4D, PlayfulVision, and NeuralConcept).
Yves PerriardYves Perriard was born in Lausanne in 1965. He received the M. Sc. in Microengineering from the Swiss Federal Institute of Technology - Lausanne (EPFL) in 1989 and the Ph D. degree in 1992. Co-founder of Micro-Beam SA, he was CEO of this company involved in high precision electric drive. Senior lecturer from 1998 and professor since 2003, he is currently director of Laboratory of Integrated Actuators. His research interests are in the field of new actuator design and associated electronic devices. In 2009, he is appointed Vice-Director of the Microengineering Institute in Neuchâtel until 2011. In 2013 the Federal Council has named him the the CTI commission in Bern. In 2014 he is appointed guest professor at Zhejiang University in China. In 2017, the lab is granted by the Werner Siemens Foundation of an amount of 12 millions CHF in order to set up a new Center for Artificial Muscules. Since 2018, he is Expert with Innosuisse, the new Swiss Innovation Agency. http://scholar.google.com/citations?hl=fr&user=V2onuO8AAAAJ https://actu.epfl.ch/news/a-12-million-franc-donation-to-create-a-center-for/ Simon Nessim HeneinBorn in 1973 and of Egyptian-Swiss nationality, Simon Henein grew up in Cairo. He obtained an engineering degree at the Ecole Polytechnique Fédérale de Lausanne (EPFL) in 1996 and went on to complete his doctorate at the EPFL in 2000. In 2001, he published the book “Conception des guidages flexibles” which has become a reference in precision engineering. He then joined the Centre Suisse d’Electronique et Microtechnique (CSEM), Neuchatel, Switzerland, where he conceived and developed mechanisms for robotic, aerospace, medical and watchmaking applications. He pursued his research career at the Paul Scherrer Institute, Villigen, Switzerland, where he developed instruments for the Swiss Light Source Synchrotron (SLS). Since November 1st, 2012, he is associate professor in microengineering at the EPFL, holder of the Patek Philippe Chair and director of the Micromechanical and horological design laboratory (Instant-Lab).
Paolo GermanoFORMATION
Mars 1990 : Engagement au Laboratoire d'électromécanique et de machines électriques (LEME), devenu entre temps le laboratoire d'actionneurs intégrés (LAI), comme assistant puis comme fonctionnaire scientifique.
Janvier 1990 : Diplôme d'ingénieur EPF en microtechnique.
Juillet 1985 : Maturité de type scientifique.
-
-
- EXPERIENCES ET DOMAINES DE COMPETENCES
-
Modélisation et simulation de l'alimentation des moteurs de l'avion Solar Impulse sur la base des résultats de la modélisation par éléments finis (FEM) de la structure magnétique Développement du banc de mesure (mécanique et software) du moteur Solar Impulse (dès mars 2004);
-
Dans le cadre d'un Projet CTI en collaboration avec l'entreprise Medtronic (Projet ColoStim), développement d'un appareil de traitement de la constipation consistant en des électrodes implantées le long du colon et alimentées par induction, à haute fréquence, à l'aide d'une bobine primaire placée autour du thorax du patient (janvier 2006 - mars 2007);
-
Développement du modèle équivalent d'une montre à glace tactile et analyse de l'effet des décharges électrostatiques sur cette montre. Projet CTI en collaboration avec l'entreprise ETA-Swatch Group (avril 2003 à octobre 2004);
-
Développement d'un système de transfert d'énergie pour navettes automotrices de machines d'assemblage. Projet CTI en collaboration avec l'entreprise Montech AG (octobre 2001 à octobre 2002);
-
Développement d'une installation de transfert d'énergie pour des wagonnets de transport de rouleaux pour l'industrie du papier avec l'entreprise Valmet AG (Groupe Metso Paper) (2001);
-
Développement d'un banc de mesure pour actionneurs linéaires dans le cadre d'un mandat avec l'entreprise Sonceboz SA (mars 1998 - juillet 2000);
-
Développement d'une installation de transfert d'énergie pour un convoyeur d'outils dans le cadre d'un mandat avec l'entreprise MCM SpA (Italie) (juillet 1998 avril 1999 et déc. 1999 avril 2000);
-
Développement d'un banc de test pour vibreur électromécanique dans le cadre d'un mandat avec l'entreprise ASULAB SA à Marin (octobre décembre 1999);
-
Développement et responsabilité d'une installation de démonstration d'un Système de transport automatique à transmission d'énergie par induction - Projet Serpentine 2 PSEL (déc. 1996 juin 1999);
-
Développement d'un banc de mesure et d'analyse pour moteurs à courant continu dans le cadre d'un projet d'impulsion RAVEL (sept. 1995 - mars 1997);
-
Développement d'un convertisseur de fréquence à résonance de 2,4 kW pour l'alimentation d'un transformateur sans fer dans le cadre du transfert d'énergie sans contacts Projet Serpentine PSEL (février 94 déc. 1995);
-
Développement d'un banc de mesure pour moteurs pas à pas dans le cadre d'un mandat avec l'entreprise Sonceboz SA (mars 1992 nov. 1995);
-
Développement d'un convertisseur direct de fréquence AC/AC de basse puissance dans le cadre du projet du cur artificiel Suisse (mars 1990 - mars 1992);
-
Suivi d'une vingtaine de projets de semestre et de master EPFL;
-
Divers projets de moindre envergure (alimentations, démonstrateurs, acquisitions de données, micro-informatique, circuits imprimés).
PUBLICATIONS
DOMAINE DU TRANSFERT D'ENERGIE PAR INDUCTION
M. Jufer, L. Cardoletti, B. Arnet, P. Germano, Ch. Koechli, N. Macabray, M. Perrottet, "Dispositif de transmission d'énergie électrique à un véhicule, sans contact, par induction - Projet PSEL N° 16 - Magnéto-glisseur", Rapport de synthèse 1995, EPFL-DE-LEME, Lausanne - Suisse, 18 octobre 1995;
M. Jufer, L. Cardoletti, P. Germano, B. Arnet, M. Perrottet, N. Macabrey, "Induction Contactless Energy Transmission System for an Electric Vehicle", ICEM96, International Conference on Electrical Machines, Vigo, Sept. 10-12, 1996, Vol II, pp. 343-347;
P. Germano, M. Jufer, "Contactless power transmission: Frequency tuning by a maximum power tracking method", EPE '97, 7th European Conference on power electronics and applications, Trondheim, Sept. 8-10, 1997, Vol IV, pp. 693-697;
M. Jufer, L. Cardoletti, P. Germano, B. Arnet, M. Perrottet, Swiss Federal Institute of Techno-logy, DE-LEME, 1015 Lausanne, Switzer-land, "Inductively powered automatic vehicles - Ser-pen-tine", EVS-15 '98, 15th International Electric Vehicle Symposium and Exhibition, Brussel, Belgium, Sept. 29 - Oct. 3, 1998, pp. 403-404;
P. Germano, Nicolas Macabrey, M. Jufer, Swiss Federal Institute of Technology, DE-LEME, 1015 Lausanne, Switzerland, "Contactless Power Transmission: Linear Positioning of the Moving Element", EPE '99, 8th European Conference on Power Electronics and Applications, Lausanne, 7-9 September, 1999, Art Nb 685;
P. Germano, M. Jufer, L. Cardoletti, B. Arnet, Ch. Koechli, N. Macabray, M. Perrottet, "Système de transport automatique à transmission d'énergie par induction. - Projet PSEL N° 115", Rapport final 1999, EPFL-DE-LEME, Lausanne - Suisse, 31 août 1999;
P. Germano, I. Stefanini, W. Montella, L. Cardoletti, Y. Perriard, "Système de transfert d'énergie pour navette de machines d'assemblage Projet CTI n° 5780.1 KTS", Rapport final, EPF Lausanne-LAI, Suisse, mars 2004;
I. Stefanini, P. Germano, L. Cardoletti, W. Montella, Y. Perriard, "Inductive Charge System for Assembly Plant Shuttles", CD-ROM, EPE 2003, Toulouse, (France), 2-4 Septembre 2003;
P. Germano, I. Stefanini, Y. Perrirad, "Stimulation colique pour le traitement des troubles de la motilité Projet ColoStim Projet CTI n° 7362.2 LSPP-LS", Rapport final, EPF Lausanne-LAI, Suisse, mai 2007.
DOMAINES DES BANCS DE MESURE - MESURES
P. Germano, "Système automatique de mesure", Rapport technique vol. I & II, EPF-Lausanne, 1995;
P. Germano, Ch. Kuert, "Banc de mesures automatisé pour entraînements électriques", Présentation et mode d'emploi, EPF-Lausanne, 1997;
P. Germano, Ch. Kuert, M. Jufer, Swiss Federal Institute of Technology, DE-LEME, 1015 Lausanne, Switzerland, "Automated test bench for electric drives: Modular layout of soft- and hardware", EPE '99, 8th European Conference on Power Electronics and Applications, Lausanne, 7-9 September, 1999, Art Nb 683;
Y. Perriard, P. Germano, I. Verettaz, "Banc de test pour vibreur électromécanique", Rapport technique, EPF-Lausanne, janvier 2000;
P. Germano, Ch. Kuert, M. Jufer, Swiss Federal Institute of Technology, DE-LEME, 1015 Lausanne, Switzerland, "DSP controlled automated Test Bench for linear Actuators Design and Choices", EPE 2001, 9th European Conference on Power Electronics and Applications, Graz, 27-29 August, 2001, Art Nb 709;
P. Germano, M. Crivii, D. Demarco, Y. Perriard, Swiss Federal Instutute of Technology, LAI, 1015 Lausanne, Switzerland & L. Paratte, R. Marquis, Service Unit RD, ETA SA (Swatch Group), 2540 Granges, Switzerland, "Analysis and Modeling of Electrostatic Discharge in a Tactile Glass Featured Watch", IAS 2004, 39th Annual Meeting, Seattle, WA, USA, October 3-7, 2004;
P. Germano, M. Crivii, D. Demarco, Y. Perriard, Swiss Federal Instutute of Technology, LAI, 1015 Lausanne, Switzerland & L. Paratte, R. Marquis, Service Unit RD, ETA SA (Swatch Group), 2540 Granges, Switzerland, "Analysis and Modeling of Electrostatic Discharge in a Tactile Glass Featured Watch", IEEE Transaction on Industry Applications, Volume 43, Issue 4, July-aug. 2007, Page(s): 1091-1098; Iurii TimrovProfessional employment
Postdoctoral researcherFebruary 2016 - presentAdvisor: Prof. Nicola MarzariPlace: STI IMX THEOS, Ecole Polytechnique Federale de Lausanne (Lausanne, Switzerland)Postdoctoral researcherJuly 2013 - January 2016Advisor: Prof. Stefano BaroniPlace: Condensed Matter Sector, Scuola Internazionale Superiore di Studi Avanzati (Trieste, Italy)Postdoctoral researcherApril 2013 - June 2013Advisor: Dr. Nathalie VastPlace: Laboratoire des Solides Irradies, Ecole Polytechnique (Palaiseau, France)
Education
PhDSeptember 2009 - March 2013Advisor: Dr. Nathalie Vast Place: Laboratoire des Solides Irradi'es, Ecole Polytechnique (Palaiseau, FranceTitle: Ab initio study of plasmons and electron-phonon coupling in bismuth: from free-carrier absorption towards a new method for electron energy-loss spectroscopyDate of defense: 27.03.2013Honors: PhD degree in physics with honors ("Tres honorable")Master in PhysicsSeptember 2008 - June 2009Place: Department of Theoretical Physics, National Taras Shevchenko University of Kyiv (Kyiv, Ukraine)Honors: Master's degree with honorsBachelor in PhysicsSeptember 2004 - June 2008Place: Department of Theoretical Physics, National Taras Shevchenko University of Kyiv (Kyiv, Ukraine)Honors: Bachelor's degree with honorsHigh School StudiesSeptember 1994 - June 2004Place: Collegium 11 (Chernigov, Ukraine)Honors: Honors degree with a Gold medal
Berend SmitBerend Smit received an MSc in Chemical Engineering in 1987 and an MSc in Physics both from the Technical University in Delft (the Netherlands). He received in 1990 cum laude PhD in Chemistry from Utrecht University (the Netherlands). He was a (senior) Research Physicists at Shell Research from 1988-1997, Professor of Computational Chemistry at the University of Amsterdam (the Netherlands) 1997-2007.
In 2004 Berend Smit was elected Director of the European Center of Atomic and Molecular Computations (CECAM) Lyon France. Since 2007 he is Professor of Chemical Engineering and Chemistry at U.C. Berkeley and Faculty Chemist at Materials Sciences Division, Lawrence Berkeley National Laboratory. Since 2014 he has been director of the Energy Center at EPFL.
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Stephan MorgenthalerACADEMIC POSITIONS
Professor of Applied Statistics, EPFL, 1988-present
Associate Professor of Statistics, Yale University, 1987-1988
Assistant Professor of Statistics, Yale University, 1983-1987
Instructor of Mathematics, Massachusetts Institute of Technology, 1983-1984
Olivier SauterTeaching & PhD PhD Students Cassandre Ekta Contré, Antonia Frank, Peizheng Zhang, Jean-Pierre Thomas Svantner, Cristina Venturini, Cosmas Quirin Lorenz Heiss, Daniel Perales Rios, Viacheslav Bochkarev, Jan Jakub Frybes, Paul Véronique Guillaume Devianne Past EPFL PhD Students Clemente Angioni, Petri Nikkola, Alberto Bottino, Andrei Martynov, Emiliano Fable, Costanza Zucca, Federico Felici, Dávid Wágner, Doohyun Kim, Anna Teplukhina, Mengdi Kong, Francesco Carpanese, Simon Van Mulders, Stefano Marchioni, F
