Ambrogio FasoliAmbrogio FASOLI was born on November 10, 1964, in Milano, Italy. After a classical high school diploma (Maturità Classica) and graduation from the University of Milano, with the degree of Dottore in Fisica, he obtained his Phd at the Ecole Polytechnique Fédérale (EPFL) with a thesis on chaos in wave-particle interactions in plasmas, which was awarded the Best EPFL Thesis prize, in 1993. He then moved to the JET Joint Undertaking, the largest worlds fusion device, near Oxford, UK, to investigate Alfvén waves and burning plasma physics. In 1995-1996 he took a sabbatical leave, visiting several Universities and Research Institutes in Europe and in the USA, including three months at General Atomics in San Diego. In 1996-1997, during a second period at JET, he participated in the fusion power worlds record experiments in Deuterium-Tritium plasmas at JET. In 1997 he was nominated Assistant Professor in MIT Physics Department, where he led a basic plasma physics group and the international collaboration between MIT and JET. In 2001 Ambrogio FASOLI was nominated Assistant Professor of Physics at EPFL, Lausanne, Switzerland, and Professeur Boursier of the Swiss National Science Foundation. He became member of CRPP Directorate and took the leadership of CRPP basic plasma physics group and of the TCV tokamak, one of the major fusion experiments worldwide. At European level he was scientific coordinator for JET experiments, spokesperson for multi-machine experiments in the frame of International Tokamak Physics Activities, and Project Leader for a JET Enhancement project. In 2005 he became Associate Professor of Physics with tenure at EPFL, then member of EFDA Science and Technology Advisory Committee, and of the Steering Committee of the Association EURATOM-Swiss Confederation. From 2006 he was also Deputy Director, then from 2007 Executive Director of CRPP and from 2008 Full Professor of Physics at EPFL. For a number of years he was the Chair of the EPFL Physics Strategic Committee and a member of the Directorate of the EPFL School of Sciences. Since the summer of 2014 Professor FASOLI was the sole Director of CRPP. He now represents Switzerland in the EUROfusion General Assembly and Bureau, and in the Governing Board for Fusion for Energy. He is member of the EUROfusion DEMO project Board, of the Scientific Board of the Helmotz Virtual Institute on Advanced Microwave Diagnostics, of the European Delegation for the Cooperation between Euratom and the Government of India in Fusion Energy Research, of the European Consortium for the development of the ITER gyratron (EGYC), and participates to numerous international review panels. He chairs the FuseNet Academic Council, the International Advisory Panel for the Laboratory of Excellence Plas@Par in the Sorbonne Universities, the European Consortium for the construction of the ITER microwave Upper Launcher (ECHUL), and the Promotion Committee of the EPFL Faculty of Basic Sciences. He is one the three European representatives in the International Tokamak Physics Activities Coordinating Committee, advising ITER, and the Editor-in-Chief of the IAEA journal Nuclear Fusion. Since January 2019, Ambrogio Fasoli is the Chair of the General Assembly, i.e. the president of EUROfusion, the European Consortium for Development of Fusion Energy. Professor FASOLI is a Fellow of the American Physical Society and since 2001 a Visiting Professor at MIT Physics Department. He is the Director of the Swiss Plasma Center.
Yves MartinTeaching & PhD Past EPFL PhD Students as codirector Francesco Piras, Jonathan Rossel Courses Fusion and industrial plasma technologies PHYS-632 The course provides an overview of the technologies that are essential for fusion developments and for industrial plasmaapplications, highlighting the synergies between the two fields. The aim is to provide a combined theoretical andexperimental background to the various topics.
Olivier SauterTeaching & PhD PhD Students Cassandre Ekta Contré, Antonia Frank, Peizheng Zhang, Jean-Pierre Thomas Svantner, Cristina Venturini, Cosmas Quirin Lorenz Heiss, Daniel Perales Rios, Viacheslav Bochkarev, Jan Jakub Frybes, Paul Véronique Guillaume Devianne Past EPFL PhD Students Clemente Angioni, Petri Nikkola, Alberto Bottino, Andrei Martynov, Emiliano Fable, Costanza Zucca, Federico Felici, Dávid Wágner, Doohyun Kim, Anna Teplukhina, Mengdi Kong, Francesco Carpanese, Simon Van Mulders, Stefano Marchioni, F
Duccio TestaProfessionals experiences Supply teacher of mathematics, physics and computing 1994–1995 various high schools in Torino (Italy)
Teaching & PhD Past EPFL PhD Students as codirector Theodoros Panis, Lorenzo Stipani Courses Sustainable energy innovation HUM-292 This course provides an introduction to the technical, social, and economic fundamentals of energy. The course examines the concrete case of nuclear fusion. How could this energy reshape our world? How can we ensure its acceptability, st
David Richard HarveyExpertise
CosmologyDark MatterGalaxy ClustersStrong Gravitational LensingWeak Gravitational Lensing
I am an observational and theoretical astrophysicist at EPFL. My main area of research is dark matter and trying to understand its properties and dynamics. I love to use deep learning in my work and understand how fondation models and generative AI can help us understand the Universe. I am a member of Euclid and ARRAKIHS and the lead of the self interacting dark matter Key Project in Euclid. Outside of my r
Jean-Michel SalleseExpertise
- Modeling of field effect transistors (Multigate FETs, Junctionless FET, HEMT, Field Effect-based Biosensors).- Modeling substrate parasitic currents in integrated circuits.- Simulation of radiation induced soft errors in integrated circuits- High energy particle solid-state sensors.
Mission
The mission of the Electron Device Modeling and Technology group is to develop analytical and numerical models (physics based) of emerging semiconductor devices, with particular emphasis on field effect trans
Mikhail ChapochnikovMikhail Shaposhnikov was born in Sochi, Russia, in 1956. He got his degree from Moscow States University in 1979 and his PhD from the Institute for Nuclear Research of the Russian Academy of Sciences in 1982 for his work on the problem of baryon asymmetry of the universe in grand unified theories. He worked from 1982 till 1986 as a junior research scientist and from 1986 till 1991 as a senior research scientist at the Theory Division of the Institute for Nuclear Research of the Russian Academy of Sciences (Moscow). From 1991 till 1998 he worked as a staff member at the Theory Division of European Organisation for Nuclear Research (CERN, Geneva). In 1998 he was appointed as a Professor of Theoretical Physics at the University of Lausanne, in 1999 he became a Director of the Institute of Theoretical Physics of Lausanne University. Since October 2003 he is a Professor at EPFL, leading the Laboratory for Particle Physics and Cosmology.
Klaus Benedikt SchönenbergerVision: Scientific research and technology development can be mobilized to help the poorest and most vulnerable in this world. Klaus Schönenberger obtained an MSc in Microengineering (1993), followed by a PhD (1996) from the Swiss Federal Institute of Technology in Lausanne (EPFL). After a post-doc at Lawrence Livermore National Laboratory in California, he spent over 10 years in the medical devices industry in leading positions such as Vice-President of Worldwide R&D in a 100mcompanyandGlobalVice−ResidentofResearchandTechnologyina1bn company. In 2009, as he was working for a medical devices company, he received a shock: he realized that there is a huge imbalance in access to medical technology in industrialized versus low and middle-income countries. After a closer look, he discovered that he imbalance’s main cause is a mismatch between existing technologies and business models, with those needed in low and middle-income countries. He decided to leave industry and, in 2009, he co-founded the EssentialMed Foundation, an innovative non-profit venture. In 2011, realizing that both technology and business models needed a profound rethinking, he joined EPFL where he launched EssentialTech, an initiative inspired by the philosophy of EssentialMed but expanded to a much wider portfolio of "essential" technologies. The university-wide program aims to develop innovative technologies and business models, for the benefit of sustainable development in low and middle-income countries. In this role, he has already launched and overseen a dozen large projects. Major Humanitarian actors such as the ICRC, MSF and Terre des Hommes took notice of the innovative approach proposed, and decided to collaborate in 2015-2016. This has resulted notably in the joint creation between EPFL and ICRC, of the Humanitarian Tech Hub at EPFL. In May 2017, Klaus directed and launched a MOOC(Massive Open Online Course) entitled “Technology Innovation for Sustainable Development” which aims to spread the unique methodology and approach worldwide. As of today, more than 6000 people have enrolled. In 2018 a first spin-off company was created. Award winning Pristem SA will deploy an innovative new digital xray imaging system, specifically designed for low-income contexts. In December 2018, the creation of the EssentialTech centre was announced by EPFL's presidency, and Klaus is now the Centre's director. Another spin-off of the EssentialTech Centre is the company HMCare, launched in 2020, which is deploying a transparent surgical mask. Cristian GalpertiExpertise
Control systems design and commissioning, especially involving complex scientific research architectures. Electronics engineering, embedded systems design and programming. Mechanical engineering, servo actuator systems design and commissioning.
Current Work
In charge of the direction of the control systems service of the Swiss Plasma Center
Education Ph.D. in Computer Science | 2005 – 2009 Politecnico di Milano Master degree in Electronics Engineering | 1998
Thibault Adrien KuntzerTeaching & PhD Courses Space mission design and operations EE-585 Space mission design and operations takes you through the necessary concepts to understand a mission mission, from planning to actually flying the spacecraft. We will focus on concepts and see many examples ranging historical probes to very topical missions.
