Nicolas GrandjeanNicolas Grandjean received a PhD degree in physics from the University ofNice Sophia Antipolis in 1994 and shortly thereafter joined the French National Center for Scientific Research (CNRS) as a permanent staff member. In 2004, he was appointed tenure-track assistant professor at the École polytechnique fédérale de Lausanne (EPFL) where he created the Laboratory for advanced semiconductors for photonics and electronics. He was promoted to full professor in 2009. He was the director of the Institute of Condensed Matter Physics from 2012 to 2016 and then moved to the University of California at Santa Barbara where he spent 6 months as a visiting professor. Since 2018, he is the head of the School of Physics at the EPFL. He was awarded the Sandoz Family Foundation Grant for Academic Promotion, received the “Nakamura Lecturer” Award in 2010, the "Quantum Devices Award” at the 2017 Compound Semiconductor Week, and “2016 best teacher” award from the EPFL Physics School. His research interests are focused on the physics of nanostructures and III-V nitride semiconductor quantum photonics.
Giovanni De CesareExpertise
Numerical simulation and physical modeling of hydraulic works and schemes; reservoir sedimentation and turbidity currents; reservoir sediment management; Ultrasonic Doppler flow measurement; river training work and restoration; soil bioengineering and nature based solutions; fluvial eco-morphology; rapid transients in pressurized waterways; technology transfer, commissioned studies and expert reports in applied hydraulics, hydraulic constructions and infrastructures; organization of continuous edu
Christophe BallifChristophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.
Olivier SauterTeaching & PhD PhD Students Cassandre Ekta Contré, Antonia Frank, Peizheng Zhang, Jean-Pierre Thomas Svantner, Cristina Venturini, Cosmas Quirin Lorenz Heiss, Daniel Perales Rios, Viacheslav Bochkarev, Jan Jakub Frybes, Paul Véronique Guillaume Devianne Past EPFL PhD Students Clemente Angioni, Petri Nikkola, Alberto Bottino, Andrei Martynov, Emiliano Fable, Costanza Zucca, Federico Felici, Dávid Wágner, Doohyun Kim, Anna Teplukhina, Mengdi Kong, Francesco Carpanese, Simon Van Mulders, Stefano Marchioni, F
Jan Van HerleBorn in Antwerp, Belgium. In Switzerland since 1983. Became Swiss citizen in 2004 out of conviction of principles of democracy and bottom-up participation. No double nationality. Village Council Member for 2 five-year mandates in 2006-2016.
1987 : Chemist from Basel University (CH).
1988 : Post-graduate IT diploma from Basel Engineering School.
1989 : Industry internship ABB Baden (CH).
1990-1993 : PhD Thesis EPFL, on Solid Oxide Fuel Cell cathode reaction mechanisms.
1994-1995 : Japanese Postdoctoral Fellowship in Tsukuba, Japan, on ceramic powders.
1995-2000 : Researcher at EPFL, Dpt. Chemistry : project responsible in PPM2 (materials), FP4-BriteEuram, NEDO (Japan), Swiss Gas Union (CH, oxygen membranes).
1998-2000 : Masters in Energy Technology, EPFL.
2000 : Cofounder of HTceramix SA (EPFL spin-off), now based in Yverdon (14 employees). Taken over by SOLIDpower in 2007, now 250 employees with 70 MCHF raised.
2000 : 1st Assistant and lecturer at LENI (STI-IGM) : fuel cell group responsible, projects on biogas (Federal Energy Office), woodgas (CCEM), fuel cell stacking (CTI, FP6, FNS), ceramic separation membranes (COST, FNS), microtubes (STI Seed), stability/lifetime/reliability in fuel cells (Electricité de France, swisselectric research). Currently 4 Ph D theses ongoing, 14 theses concluded, of which 5 colateral with SB and IMX. M.E.R. since Nov 2008.
Total funding raised so far >18 MCHF (50% as main applicant; 30% outside CH; 20% industry).
Scientific output : >135 peer-reviewed publications, >120 conference papers, 40 invited presentations (8 keynotes), >70 granted proposals.
Fluent in 5 languages (Dutch, French, German ( Swiss-german), English, Spanish).
Stefano CodaTeaching & PhD PhD Students Vincent Masson, Luigi Persico, Ewout Koen L. Devlaminck, Martino Bonisolli, Alessandro Balestri, Mackenzie Peter-Fulford Van Rossem, James Winston Irawati Tumbokon, Salomon Guinchard, Inès Vergara, Michele Bottino Past EPFL PhD Students Alessandro Marinoni, Silvano Gnesin, Cornelis Adrianus de Meijere, Josef Kamleitner, Zhouji Huang, Himank Anand, Pedro Andres Molina Cabrera, Dahye Choi, Federico Pesamosca, Aylwin Iantchenko, Jean Arthur Cazabonne
Jean-Louis ScartezziniDirector of EPFL Solar Energy and Building Physics Laboratory (1994-present); Founder & Director of ENAC Institute of Infrastructures, Resources and Environment (2002-2009); Founder & Director of EPFL Doctoral Program in Environment (2002-2009); Co-Director of EPFL Institute of Building Technology (1994-1997); Associate Professor of Building Physics at EPFL (1994-1997); Associate Professor of Building Physics at University of Geneva (1990-1997); Group Leader & Research Fellow at the EPFL Solar Energy Research Group (1981-1989); Research Fellow at the Applied Geophysics Institute of University of Lausanne (1980-1981).
Ambrogio FasoliAmbrogio FASOLI was born on November 10, 1964, in Milano, Italy. After a classical high school diploma (Maturità Classica) and graduation from the University of Milano, with the degree of Dottore in Fisica, he obtained his Phd at the Ecole Polytechnique Fédérale (EPFL) with a thesis on chaos in wave-particle interactions in plasmas, which was awarded the Best EPFL Thesis prize, in 1993. He then moved to the JET Joint Undertaking, the largest worlds fusion device, near Oxford, UK, to investigate Alfvén waves and burning plasma physics. In 1995-1996 he took a sabbatical leave, visiting several Universities and Research Institutes in Europe and in the USA, including three months at General Atomics in San Diego. In 1996-1997, during a second period at JET, he participated in the fusion power worlds record experiments in Deuterium-Tritium plasmas at JET. In 1997 he was nominated Assistant Professor in MIT Physics Department, where he led a basic plasma physics group and the international collaboration between MIT and JET. In 2001 Ambrogio FASOLI was nominated Assistant Professor of Physics at EPFL, Lausanne, Switzerland, and Professeur Boursier of the Swiss National Science Foundation. He became member of CRPP Directorate and took the leadership of CRPP basic plasma physics group and of the TCV tokamak, one of the major fusion experiments worldwide. At European level he was scientific coordinator for JET experiments, spokesperson for multi-machine experiments in the frame of International Tokamak Physics Activities, and Project Leader for a JET Enhancement project. In 2005 he became Associate Professor of Physics with tenure at EPFL, then member of EFDA Science and Technology Advisory Committee, and of the Steering Committee of the Association EURATOM-Swiss Confederation. From 2006 he was also Deputy Director, then from 2007 Executive Director of CRPP and from 2008 Full Professor of Physics at EPFL. For a number of years he was the Chair of the EPFL Physics Strategic Committee and a member of the Directorate of the EPFL School of Sciences. Since the summer of 2014 Professor FASOLI was the sole Director of CRPP. He now represents Switzerland in the EUROfusion General Assembly and Bureau, and in the Governing Board for Fusion for Energy. He is member of the EUROfusion DEMO project Board, of the Scientific Board of the Helmotz Virtual Institute on Advanced Microwave Diagnostics, of the European Delegation for the Cooperation between Euratom and the Government of India in Fusion Energy Research, of the European Consortium for the development of the ITER gyratron (EGYC), and participates to numerous international review panels. He chairs the FuseNet Academic Council, the International Advisory Panel for the Laboratory of Excellence Plas@Par in the Sorbonne Universities, the European Consortium for the construction of the ITER microwave Upper Launcher (ECHUL), and the Promotion Committee of the EPFL Faculty of Basic Sciences. He is one the three European representatives in the International Tokamak Physics Activities Coordinating Committee, advising ITER, and the Editor-in-Chief of the IAEA journal Nuclear Fusion. Since January 2019, Ambrogio Fasoli is the Chair of the General Assembly, i.e. the president of EUROfusion, the European Consortium for Development of Fusion Energy. Professor FASOLI is a Fellow of the American Physical Society and since 2001 a Visiting Professor at MIT Physics Department. He is the Director of the Swiss Plasma Center.
Duccio TestaProfessionals experiences Supply teacher of mathematics, physics and computing 1994–1995 various high schools in Torino (Italy)
Teaching & PhD Past EPFL PhD Students as codirector Theodoros Panis, Lorenzo Stipani Courses Sustainable energy innovation HUM-292 This course provides an introduction to the technical, social, and economic fundamentals of energy. The course examines the concrete case of nuclear fusion. How could this energy reshape our world? How can we ensure its acceptability, st
Francesco MondadaDr. Mondada received his M.Sc. in micro-engineering in 1991 and his Doctoral degree in 1997 at EPFL. During his thesis he co-founded the company K-Team, being both CEO and president of the company for about 5 years. He is one of the three main developers of the Khepera robot, considered as a standard in bio-inspired robotics and used by more than 1,000 universities and research centers worldwide. Fully back in research in 2000 and after a short period at CALTECH, he participated to the SWARM-BOTS project as the main developer of the s-bot robot platform, which was ranked on position 39 in the list of The 50 Best Robots Ever (fiction or real) by the Wired Journal in 2006. The SWARM-BOTS project was selected as FET-IST success story by the EU commission. He is author of more than 100 papers in the field of bio-inspired robotics and system level robot design. He is co-editor of several international conference proceedings. In November 2005 he received the EPFL Latsis University prize for his contributions to bio-inspired robotics. In 2011 he received the "Crédit Suisse Award for Best Teaching" from EPFL and in 2012 the "polysphère" award from the students as best teacher in the school of engineering. His interests include the development of innovative mechatronic solutions for mobile and modular robots, the creation of know-how for future embedded applications, and making robot platforms more accessible for education, research, and industrial development.
Berend SmitBerend Smit received an MSc in Chemical Engineering in 1987 and an MSc in Physics both from the Technical University in Delft (the Netherlands). He received in 1990 cum laude PhD in Chemistry from Utrecht University (the Netherlands). He was a (senior) Research Physicists at Shell Research from 1988-1997, Professor of Computational Chemistry at the University of Amsterdam (the Netherlands) 1997-2007.
In 2004 Berend Smit was elected Director of the European Center of Atomic and Molecular Computations (CECAM) Lyon France. Since 2007 he is Professor of Chemical Engineering and Chemistry at U.C. Berkeley and Faculty Chemist at Materials Sciences Division, Lawrence Berkeley National Laboratory. Since 2014 he has been director of the Energy Center at EPFL.
Jean-Philippe HoggeTeaching & PhD PhD Students Constant Philippe Panisset, Pierrick Paul Louis Giroud-Garampon Past EPFL PhD Students Sudheer Kumar Jawla, Guillaume Michel Le Bars Past EPFL PhD Students as codirector Falk Braunmüller Courses Fusion and industrial plasma technologies PHYS-632 The course provides an overview of the technologies that are essential for fusion developments and for industrial plasmaapplications, highlighting the synergies between the two fields. The aim is to provide a combined th
Ugo SiravoTeaching & PhD Courses Fusion and industrial plasma technologies PHYS-632 The course provides an overview of the technologies that are essential for fusion developments and for industrial plasmaapplications, highlighting the synergies between the two fields. The aim is to provide a combined theoretical andexperimental background to the various topics.
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Mario PaoloneMario Paolone received the M.Sc. (with honors) and the Ph.D. degree in electrical engineering from the University of Bologna, Italy, in 1998 and 2002, respectively. In 2005, he was appointed assistant professor in power systems at the University of Bologna where he was with the Power Systems laboratory until 2011. In 2010, he received the Associate Professor eligibility from the Politecnico di Milano, Italy. Since 2011 he joined the Swiss Federal Institute of Technology, Lausanne, Switzerland, where he is now Full Professor, Chair of the Distributed Electrical Systems laboratory and Head of the Swiss Competence Center for Energy Research (SCCER) FURIES (Future Swiss Electrical infrastructure). He was co-chairperson of the technical programme committees of the 9th edition of the International Conference of Power Systems Transients (IPST 2009) and of the 2016 Power Systems Computation Conference (PSCC 2016). He was chair of the technical programme committee of the 2018 Power Systems Computation Conference (PSCC 2018). In 2013, he was the recipient of the IEEE EMC Society Technical Achievement Award. He was co-author of several papers that received the following awards: best IEEE Transactions on EMC paper award for the year 2017, in 2014 best paper award at the 13th International Conference on Probabilistic Methods Applied to Power Systems, Durham, UK, in 2013 Basil Papadias best paper award at the 2013 IEEE PowerTech, Grenoble, France, in 2008 best paper award at the International Universities Power Engineering Conference (UPEC). He was the founder Editor-in-Chief of the Elsevier journal Sustainable Energy, Grids and Networks and was Associate Editor of the IEEE Transactions on Industrial Informatics. His research interests are in power systems with particular reference to real-time monitoring and operation, power system protections, power systems dynamics and power system transients. Mario Paolone is author or coauthor of over 300 scientific papers published in reviewed journals and international conferences.
Benoît CrouzyTeaching & PhD Past EPFL PhD Students as codirector Sophie Erb Courses Environmental transport phenomena ENG-420 The course aims at introducing basic physical aspects of molecular and turbulent diffusion, as well as of dispersion processes, their mathematical modeling, solutions and related environmental applications
Paolo PeronaExpertise
River mechanics and morphoydnamics, Erosion processes, Ecohydraulics, Plant roots biomechanics, Watershed and catchment hydrology, Water Resources Management, General hydraulics, Time Series Analysis, Dynamical Systems Theory, Stochastic Processes
Expertise
River mechanics and morphoydnamics, Erosion processes, Ecohydraulics, Plant roots biomechanics, Watershed and catchment hydrology, Water Resources Management, General hydraulics, Time Series Analysis, Dynamical Systems Theory, Stochastic Proces
