Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Compression molding

Related publications (28)

Process-Induced Structures of Injection-Molded High-Density Polyethylene-Combining X-ray Scattering and Finite Element Modeling

Marianne Liebi, Manuel Guizar Sicairos

The success of plastics heavily relies on fast melt processing methods used for large-scale industrial manufacturing, including injection molding. The hierarchical structure of the solid polymer depends on material selection combined with processing condit ...

Amer Chemical Soc2024

Novel tooling for direct melt impregnation of textile with variotherm injection moulding: Methodology and proof of concept

Véronique Michaud, Vincent Werlen

Thermoplastic compression resin transfer moulding coupled with injection moulding is an appealing process for the production of thermoplastic composites. However, its implementation at an industrial scale remains challenging as variotherm injection mouldin ...

SAGE PUBLICATIONS LTD2022

A life cycle analysis of novel lightweight composite processes: Reducing the environmental footprint of automotive structures

Véronique Michaud, Baris Çaglar, Vincent Werlen, Colin Gomez

In this study, three novel thermoplastic impregnation processes were analyzed towards automotive applications. The first process is thermoplastic compression resin transfer molding in which a glass fiber mat is impregnated in through thickness by a thermop ...

ELSEVIER SCI LTD2022

Resin Transfer molding of High-Fluidity Polyamide-6 with modified Glass-Fabric preforms

Véronique Michaud, Baris Çaglar, Damiano Salvatori, Robin Samuel Trigueira, Colin Gomez

In Resin Transfer Molding (RTM), resin precursors of thermoset or, more recently, thermoplastic polymers are generally employed, raising issues related to the chemical reaction taking place during and after part processing. In this study, already polymeriz ...

2021

Influence of the stacking sequence on the low-energy impact resistance of flax/PA11 composite

Yann Albert Gérard Lebaupin

In this paper, the low-energy impact behavior of a fully biobased composite made of bio-sourced polyamide 11 resin reinforced with flax fibers was investigated. Different composite laminates were studied in order to determine the stacking sequence effects ...

SAGE PUBLICATIONS LTD2019

3D spacers enhance flow kinetics in resin transfer molding with woven fabrics

Véronique Michaud, Baris Çaglar, Damiano Salvatori

Impregnation time in Resin Transfer Molding (RTM) is directly proportional to resin viscosity and inversely proportional to fabric permeability, limiting the use of high-viscosity resins with conventional reinforcements. In this study, we show how to reduc ...

2019

Strategies for faster impregnation in melt thermoplastic resin transfer molding process

Damiano Salvatori

Continuous fiber thermoplastic composites are potential substitutes of steel in structural automotive components, since they combine fiber strength and rigidity with ductility, potential recyclability and low density of the thermoplastic (TP) matrix. Resin ...

EPFL2018

Hybrid Processing of Thermoplastic Based Multimaterials

Rajasundar Chandran

There is a growing interest in exploring novel material combinations and processing technology to manufacture complex 3D shaped polymer and composite structures. In the field of prosthetics and orthotics, this need is significant with additional challenges ...

EPFL2017

On the Limits of Precision Glass Molding for Diffractive Optical Elements

Karin Prater

Diffractive optical elements (DOEs) consist of surface reliefs with dimensions in the micrometer range and nanometer precision. Two technologies dominate: Elements replicated in plastic and directly microfabricated elements in fused silica. Plastic DOEs ar ...

EPFL2017

Efficiency Factors for Plastic Design in Concrete: Influence of Brittleness in Compression, High Tech Concrete: Where Technology and Engineering Meet

Aurelio Muttoni, Miguel Fernández Ruiz, Francesco Rafael Alberto Moccia

A large number of design approaches for structural concrete rely on the applicability of limit analysis. This is for instance the case of bending and shear design in members with transverse reinforcement, where it is assumed that plastic compression fields ...

2017

3D Printing of Polymers with Hierarchical Continuous Porosity

Dominique Pioletti, Pierre-Etienne Bourban, Matteo Gregorio Modesto Marascio, Jens Antons

Cellular thermoplastic structures with multiscale porosity (1–300 µm microporosity to 0.3–10 mm macroporosity) are produced from an integrated approach of 3D printing by Fused Deposition Modeling printing and Supercritical CO2 Foaming. Porous strands and r ...

Wiley2017

Precision glass molding of high-resolution diffractive optical elements

Hans Peter Herzig, Toralf Scharf, Karin Prater

The demand of high resolution diffractive optical elements (DOE) is growing. Smaller critical dimensions allow higher deflection angles and can fulfill more demanding requirements, which can only be met by using electron-beam lithography. Replication techn ...

Spie-Int Soc Optical Engineering2016

Effect of interfacial interactions on the electromechanical response of poly(vinylidene fluoride-trifluoroethylene)/BaTiO3 composites and its time dependence after poling

Jan-Anders Edvin Maansson, Véronique Michaud, Yves Leterrier, Dragan Damjanovic, Sara Dalle Vacche

Solvent cast and compression molded composite films based on poly(vinylidene fluoride-trifluoroethylene), containing pristine and silylated BaTiO3 particles, were poled, and their electromechanical response (d(33)), their dielectric properties, and the cry ...

Elsevier2015

Multilevel Micro-Structuring of Glassy Carbon for Precision Glass Molding of Diffractive Optical Elements

Hans Peter Herzig, Toralf Scharf, Karin Prater

A consumer market for diffractive optical elements in glass can only be created if high efficient elements are available at affordable prices. In diffractive optics the efficiency and optical properties increases with the number of levels used, but in the ...

Spie-Int Soc Optical Engineering2015

Shape memory polymers with controlled time-dependent shape recovery

Charly David Azra

The aim of this thesis has been to investigate the use of heat-activated shape memory polymers (SMPs) as novel smart actuators for the controlled delivery of fluids and their suitability for applications such as low-cost drug delivery. On heating to temper ...

EPFL2013

The effect of processing conditions on the morphology, thermomechanical, dielectric, and piezoelectric properties of P(VDF-TrFE)/BaTiO3 composites

Jan-Anders Edvin Maansson, Véronique Michaud, Yves Leterrier, Dragan Damjanovic, Sara Dalle Vacche, Fabiane Costa Oliveira Moffat

In this study (0-3) P(VDF-TrFE)/BaTiO3 composites containing up to 60 vol% of ceramic phase were prepared by solvent casting or compression molding. Their thermomechanical, dielectric, and piezoelectric properties were investigated, and discussed in the li ...

Springer Verlag2012

Processing and tribology of thermoplastic polyurethane particulate composite materials

Véronique Michaud, Stefano Mischler, Basile Golaz

The processing, mechanical and tribological properties of wax containing thermoplastic polyurethane–filler composites were studied for different weight ratios of graphite, TiO2, MoS2, and ZrO2 microparticles and SiO2 nanoparticles. The composites were comp ...

Wiley-Blackwell2012

UV-cured Epoxy for Adhesion in Steel Reinforced Thermoplastic Composites

Basile Golaz

This work addresses the development of composite materials that contain metallic load-bearing cords with the aim of combining outstanding mechanical performance with added functionality, including electrical conductivity, data transmission, and temperature ...

EPFL2012

RoSe: A sub-GHz wireless sensor platform with housing integrated overmolded antenna

Anja Skrivervik, Jean-François Zürcher, Pierre-André Farine, Francesco Merli, Alexis Boegli, Mitko Tanevski

A wireless sensor platform for use in ultralow-power wireless sensor networks (WSNs) is presented. The proposed round sensor (RoSe) node is physically robust, is resistant to humidity, and has a housing that can be in direct contact with food. These charac ...

Institute of Electrical and Electronics Engineers2012

Assessing the life cycle costs and environmental performance of lightweight materials in automobile applications

Jan-Anders Edvin Maansson, Véronique Michaud, Christian Ludwig, Robert Andrew Witik, Jérôme Payet

Life cycle assessment (LCA) and manufacturing focused life cycle costing are used to evaluate the potential advantages of composites in automotive applications. The life cycle costs and environmental performance of several suitable lightweight polymer comp ...

2011