Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) Andreas MortensenAndreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
Alain NussbaumerExpertise
Metallic structuresStructural glassFatigue and fracture mechanicsAssessment of existing structuresUltra low cycle
Teaching & PhD Past EPFL PhD Students Luís Costa Borges, Claire Acevedo, Nariman Maddah, Farshid Zamiri Akhlaghi, Manuel Santarsiero, Luca D'Angelo, Cláudio Alexandre Pereira Baptista, Albano António Sousa, Jagoda Cupac, Ardalan Hosseini, Martin Garcia, Hossein Heydarinouri, Jian Zhan Past EPFL PhD Students as codirector Marina Rocha Courses Design of steel structures CIVIL-2
Dragan DamjanovicDragan Damjanovic received BSc diploma in Physics from the Faculty of Natural Sciences and Mathematics, University of Sarajevo, in 1980, and PhD in Ceramics Science from the Department of Materials Science and Engineering, College of Earth and Mineral Sciences, the Pennsylvania State University (PSU) in 1987. From 1988 to 1991 he was a research associate in the Materials Research Laboratory at the PSU. He joined the Ceramics Laboratory, Department of Materials Science and Engineering, Ecole polytechnique fédérale de Lausanne in 1991. He is currently a "professeur titulaire", heads the Group for Ferroelectrics and Functional Oxides at the Institute of Materials and teaches undergraduate and graduate courses on structure and electrical properties of materials. The research activities include fundamental and applied investigations of piezoelectric, ferroelectric and dielectric properties of a broad class of materials.
Eric BoillatContact Microcity
Phone: 41 21 69 54456
Teaching & PhD Past EPFL PhD Students as codirector Serguei Kolossov, Cédric André, Jamasp Jhabvala, Christoph Van Gestel, Tatiana Polivnikova, Nikola Kalentics Courses Industrial production processes ME-212 Application windows of the main manufacturing process categories. Implementation of simple models describing the behavior of the main manufacturing processes. Basic understanding of the economic aspects of production processes. Manufacturing proc
John BotsisJohn (Ioannis) Botsis obtained his diplôme in civil engineering at the University of Patras, Greece in 1979. He continued his education at Case Institute of Technology in Cleveland Ohio/USA, where he received his MS and Ph.D. in 1984. After two years at the research center for national defense in Athens he was nominated assistant professor at the University of Illinois in Chicago, associate in 1991 and full professor in 1995. In 1996, he was nominated professor of solids and structural mechanics at the EPFL. At EPFL he teaches mechanics of structures and mechanics of continuous media´ at the bachelors level and Fracture mechanics at the masters and doctoral levels. His research covers the mechanics of solids and structures, fracture mechanics and micromechanics of polymers, metals and their composites as well as biomechanics. He is also actively involved in full-filed optical methods for surface strain measurements as well as internal strain measurements using fiber Bragg grating sensors, aimed at characterizing micromechanics of fracture, residual strains and strain distribution in composite laminates for structural monitoring. Funding for his research comes from the Swiss National Science Foundation, State Secretariat for Education and Research and Swiss industry. He retired on February 28, 2020.
Simon Nessim HeneinBorn in 1973 and of Egyptian-Swiss nationality, Simon Henein grew up in Cairo. He obtained an engineering degree at the Ecole Polytechnique Fédérale de Lausanne (EPFL) in 1996 and went on to complete his doctorate at the EPFL in 2000. In 2001, he published the book “Conception des guidages flexibles” which has become a reference in precision engineering. He then joined the Centre Suisse d’Electronique et Microtechnique (CSEM), Neuchatel, Switzerland, where he conceived and developed mechanisms for robotic, aerospace, medical and watchmaking applications. He pursued his research career at the Paul Scherrer Institute, Villigen, Switzerland, where he developed instruments for the Swiss Light Source Synchrotron (SLS). Since November 1st, 2012, he is associate professor in microengineering at the EPFL, holder of the Patek Philippe Chair and director of the Micromechanical and horological design laboratory (Instant-Lab).
Guillaume AnciauxResearchResearch Topics My research can be decomposed in three main blocks:First, the main goal of my current research is the physical description of contact interactions. I performed numerous studies of this topic using different models from the continuum scale down to atomistic scale. Since atomic phenomena and macroscopic observations are linked, the physics of contact needs the simultaneous consideration of several scales. For instance, plasticity is a theory defined for the macroscopic scale whereas t
Eugen Brühwilerbirth date: 19.11.1958 nationality: Swiss (native from Dussnang, Canton of Thurgau) Education : - July 1988 : doctoral degree from the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland with a thesis entitled Fracture mechanics of dam concrete subjected to quasi-static and seismic loading conditions - December 1983 : civil engineering diploma (university degree) from the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland Professional Experience : - Since 1st April 1995 : Professor of Structural Engineering at EPFL and Head of the Laboratory of Maintenance, Construction and Safety for Civil Structures (MCS) (often considered being the first chair worldwide devoted exclusively to existing civil structures). - 1991-94 Project Manager and structural engineer with the Swiss Federal Railways (SBB), Division of Bridges and Structures, Zurich: Monitoring and maintenance of bridges and structures, Project manager and checking engineer for the construction of new bridges and rehabilitation of existing bridges. - 1989/90 Research associate at the Department of Civil Engineering, University of Colorado, Boulder, USA : Fracture mechanics of concrete and fracture of concrete dams. - 1986-88 Doctoral student at EPFL-LMC (Building Materials, Prof. Wittmann) : Fracture mechanics of concrete, fracture of concrete dams under seismic loading - 1984/85 Research engineer at EPFL-ICOM (Steel Structures, Prof. Badoux and Prof. Hirt) : Fatigue behaviour and fracture mechanics of riveted bridges
Jan Van HerleBorn in Antwerp, Belgium. In Switzerland since 1983. Became Swiss citizen in 2004 out of conviction of principles of democracy and bottom-up participation. No double nationality. Village Council Member for 2 five-year mandates in 2006-2016.
1987 : Chemist from Basel University (CH).
1988 : Post-graduate IT diploma from Basel Engineering School.
1989 : Industry internship ABB Baden (CH).
1990-1993 : PhD Thesis EPFL, on Solid Oxide Fuel Cell cathode reaction mechanisms.
1994-1995 : Japanese Postdoctoral Fellowship in Tsukuba, Japan, on ceramic powders.
1995-2000 : Researcher at EPFL, Dpt. Chemistry : project responsible in PPM2 (materials), FP4-BriteEuram, NEDO (Japan), Swiss Gas Union (CH, oxygen membranes).
1998-2000 : Masters in Energy Technology, EPFL.
2000 : Cofounder of HTceramix SA (EPFL spin-off), now based in Yverdon (14 employees). Taken over by SOLIDpower in 2007, now 250 employees with 70 MCHF raised.
2000 : 1st Assistant and lecturer at LENI (STI-IGM) : fuel cell group responsible, projects on biogas (Federal Energy Office), woodgas (CCEM), fuel cell stacking (CTI, FP6, FNS), ceramic separation membranes (COST, FNS), microtubes (STI Seed), stability/lifetime/reliability in fuel cells (Electricité de France, swisselectric research). Currently 4 Ph D theses ongoing, 14 theses concluded, of which 5 colateral with SB and IMX. M.E.R. since Nov 2008.
Total funding raised so far >18 MCHF (50% as main applicant; 30% outside CH; 20% industry).
Scientific output : >135 peer-reviewed publications, >120 conference papers, 40 invited presentations (8 keynotes), >70 granted proposals.
Fluent in 5 languages (Dutch, French, German ( Swiss-german), English, Spanish).
Mohammad Khaja NazeeruddinDr. Md. K. Nazeeruddin received M.Sc. and Ph. D. in inorganic chemistry from Osmania University, Hyderabad, India. He joined as a Lecturer in Deccan College of Engineering and Technology, Osmania University in 1986, and subsequently, moved to Central Salt and Marine Chemicals Research Institute, Bhavnagar, as a Research Associate. He was awarded the Government of Indias fellowship in 1987 for study abroad. In 2014, EPFL awarded him the title of Professor. His current research at EPFL focuses on Dye Sensitized Solar Cells, Perovskite Solar Cells, CO2 reduction, Hydrogen production, and Light-emitting diodes. He has published more than 509 peer-reviewed papers, ten book chapters, and he is inventor/co-inventor of over 50 patents. The high impact of his work has been recognized by invitations to speak at over 130 international conferences, and has been nominated to the OLLA International Scientific Advisory Board. He appeared in the ISI listing of most cited chemists, and has more than 49'000 citations with an h-index of 105. He is teaching "Functional Materials" course at EPFL, and Korea University; directing, and managing several industrial, national, and European Union projects. He was awarded EPFL Excellence prize in 1998 and 2006, Brazilian FAPESP Fellowship in 1999, Japanese Government Science & Technology Agency Fellowship, in 1998, Government of India National Fellowship in 1987-1988. Recently he has been appointed as World Class University (WCU) professor by the Korea University, Jochiwon, Korea (http://dses.korea.ac.kr/eng/sub01_06_2.htm), Adjunct Professor by the King Abdulaziz University, Jeddah, Saudi Arabia and Eminent Professor in Brunei. Paul Joseph DysonPaul Dyson joined the Institute of Chemical Sciences and Engineering at the EPFL in 2002 where he heads the Laboratory of Organometallic and Medicinal Chemistry and between 2008 and 2016 chaired the Institute. He has won several prizes including the Werner Prize of the Swiss Chemical Society in 2004, the Award for Outstanding Achievements in Bioorganometallic Chemistry in 2010, the Centennial Luigi Sacconi Medal of the Italian Chemical Society in 2011, the Bioinorganic Chemistry Award of the Royal Society of Chemistry in 2015, the European Sustainable Chemistry Award of the European Chemical Society in 2018 and the Green Chemistry Award from the Royal Society of Chemistry in 2020. He is also a Clarivate Highly Cited Researcher and has an H-index >110 (web of science and google scholar). He was elected a Fellow of the Royal Society of Chemistry in 2010, a Fellow of the European Academy of Science in 2019 and a life-long fellow of the American Association for the Advancement of Science in 2020. Over the years he has held visiting professorships at the University of Bourgogne, University of Pierre et Marie Curie, University of Vienna, University of Rome Tor Vergara, Chimie Paristech and Shangai Jiao Tong University.Since 2016 he has been Member of the Council of the Division of Mathematics, Natural and Engineering Sciences at the Swiss National Science Foundation.Between 2016-2021 he has been Member of the Council of the Division of Mathematics, Natural and Engineering Sciences at the Swiss National Science Foundation. In 2021 he was appointed Dean of the Faculty of Basic Sciences.
Yves LeterrierYves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
Dimitrios LignosProf. Lignos joined the École Polytechnique Féderale de Lausanne (EPFL) in 2016 from McGill University in Canada where he was a tenured Associate Professor and a William Dawson Scholar for Infrastructure Resilience. He holds a diploma (National Technical University of Athens, NTUA, 2003), M.S. (Stanford University, 2004) and Ph.D. (Stanford University, 2008). In addition, he was a post-doctoral scientist at Stanford University (2009) and in Kyoto University (2010). Prof. Lignos teaches graduate and undergraduate courses in seismic design, nonlinear behaviour of steel and composite structures as well as supplemental damping systems, Structural Stability, Nonlinear Analysis and Performance-based Earthquake Engineering. His awards for teaching, research and service in Civil Engineering include the 2011 Outstanding Teaching Award (Faculty of Engineering, McGill University), as well as the Outstanding reviewer (2012, 2013) award from ASCE, the 2013 State-of-the-Art in Civil Engineering Award by ASCE and the 2014 Christophe Pierre Award for Research Excellence - Early Career. Just recently, he received the 2019 Walter L. Huber Civil Engineering Research Prize from ASCE for significant contributions in developing state of the art methods to simulate extreme limit states in steel structures.Prof. Lignos is a member of ASCE and the Earthquake Engineering Research Institute. He acts as an Associate Editor for Metal Structures and Seismic Effects of the ASCE Journal of Structural Engineering. He joined the Editorial Board of Earthquake Spectra and Earthquake Engineering and Structural Dynamics International journals. He serves as an acting member of the CEN/TC 250/SC 8/WG 2 and has been selected as a member of the Project Team (PT2) for the Eurocode 8-Part 1 Current Revisions for Steel and Composite Structures. He is also a member of the Canadian Standards Association (CSA) S16 technical committee for Steel Structures. Prof. Lignos is involved as a NEHRP consultant in numerous research-to-practice projects related to the behaviour and nonlinear modelling and analysis of structures applicable to the engineering practice through the Applied Technology Council (ATC). Detailed Curriculum Vitae (last update September 2018)
Sangwoo KimSangwoo Kim is set to join EPFL as a Tenure Track Assistant Professor in September 2023. Prior to his appointment at EPFL, he served as a postdoctoral fellow in the Department of Mechanical Engineering at the University of California, Santa Barbara. He earned his graduate degree in Theoretical and Applied Mechanics from the University of Illinois at Urbana-Champaign, where his research delved into the relationships between statistics, geometry, and mechanical states in cellular matters. Currently, his research focus on fundamental understanding of biological and living systems, as well as the study of soft and active matter employing principles from mechanics and physics. His research interests encompass embryonic development, tissue morphogenesis, structure and mechanics of soft materials, inherent structure of amorphous materials, and non-equilibrium dynamics of active matter.
Karen ScrivenerDe nationalité anglaise, Karen Scrivener est née en 1958. Au cours de sa carrière, ses travaux et sa recherche traitaient des domaines suivants: Identification du développement microstucturale pendant l'hydratation du ciment. Elaboration d'une approche multitechnique pour étudier la microstucture des ciments et bétons, avec accent sur la quantification par analyse des images d'électrons retrodiffusés. Caractérisation de l'auréole de transition de la pâte de ciment autour des granulats. Compréhension des processus de dégardation des bétons, en particulier le gonflement lié à la formation de l'éttringite retardée dans les bétons étuvés.
