David Atienza AlonsoDavid Atienza Alonso is an associate professor of EE and director of the Embedded Systems Laboratory (ESL) at EPFL, Switzerland. He received his MSc and PhD degrees in computer science and engineering from UCM, Spain, and IMEC, Belgium, in 2001 and 2005, respectively. His research interests include system-level design methodologies for multi-processor system-on-chip (MPSoC) servers and edge AI architectures. Dr. Atienza has co-authored more than 350 papers, one book, and 12 patents in these previous areas. He has also received several recognitions and award, among them, the ICCAD 10-Year Retrospective Most Influential Paper Award in 2020, Design Automation Conference (DAC) Under-40 Innovators Award in 2018, the IEEE TCCPS Mid-Career Award in 2018, an ERC Consolidator Grant in 2016, the IEEE CEDA Early Career Award in 2013, the ACM SIGDA Outstanding New Faculty Award in 2012, and a Faculty Award from Sun Labs at Oracle in 2011. He has also earned two best paper awards at the VLSI-SoC 2009 and CST-HPCS 2012 conference, and five best paper award nominations at the DAC 2013, DATE 2013, WEHA-HPCS 2010, ICCAD 2006, and DAC 2004 conferences. He serves or has served as associate editor of IEEE Trans. on Computers (TC), IEEE Design & Test of Computers (D&T), IEEE Trans. on CAD (T-CAD), IEEE Transactions on Sustainable Computing (T-SUSC), and Elsevier Integration. He was the Technical Program Chair of DATE 2015 and General Chair of DATE 2017. He served as President of IEEE CEDA in the period 2018-2019 and was GOLD member of the Board of Governors of IEEE CASS from 2010 to 2012. He is a Distinguished Member of ACM and an IEEE Fellow.
Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) Dominique BonvinDominique Bonvin is Professor and Director of the Automatic Control Laboratory of EPFL. He received his Diploma in Chemical Engineering from ETH Zürich, and his Ph.D. degree from the University of California, Santa Barbara. He worked in the field of process control for the Sandoz Corporation in Basel and with the Systems Engineering Group of ETH Zürich. He joined the EPFL in 1989, where his current research interests include modeling, control and optimization of dynamic systems. He served as Director of the Automatic Control Laboratory for the periods 1993-97, 2003-2007 and again since 2012, Head of the Mechanical Engineering Department in 1995-97 and Dean of Bachelor and Master Studies at EPFL for the period 2004-2011.
Thierry MeyerThierry Meyer received in 1986 a diploma degree (MSc) in chemical engineering from the Swiss Federal Institute of Technology at Lausanne (EPFL). He was awarded in 1989 a PhD at EPFL for his thesis on micromixing in highly viscous polymeric media. He joined the Institute of Chemical Engineering from 1989 till 1993 as senior scientist in the field of polymerization reactions. In 1994 he joined Ciba-Geigy SA in the pigment division as successively development chemist, head of development a.i. and finally production manager for high performance pigments. Returning to the Institute of Chemical Engineering at EPFL in Lausanne by the end of 1998, he was nominated maître denseignement et de recherche (MER) for leading a new research group in the field of polymers and supercritical fluids, and teaching to chemists, chemical engineers and material sciences, disciplines as process development, introduction to chemical engineering, polymer and organic chemistry at master and bachelor program. In 2005 he owned the responsibility of the Occupational Health and Safety of the school of basic sciences on top of his research activities dealing with risk management and supercritical fluids. He is presently teaching introduction to chemical engineering at bachelor level, risk management at master level and specific courses on safety and engineering risk management in continuing education. He acts also as consultant and expert in risk assessment and chemical engineering matters by the ICC (International Chamber of Commerce) of the World Business Organization, by several consultancy companies and by major and SMEs chemical industries. Thierry Meyer is currently member of several international associations of the European Federation of Chemical Engineering, American institution of chemical engineering, American chemical society and senior member of the American Institute of Chemical Engineers. He was elected chairman of the European Working Party on Polymer Reaction Engineering from 2001 till 2006. He his currently the Swiss academic member of the European Working Party on Loss Prevention and Safety Promotion as well as of the European Working Party on Education. He is member of several editorial boards: Chemical Engineering Research and Design, Macromolecular Reaction Engineering, Chemical Engineering and Technology, Journal of Chemical Health and Safety.
Konstantin MikityukExpertise
Generation-IV fast reactors, advanced modeling, coupled neutronics and thermal hydraulics, sodium boiling
Paul Scherrer Institut
Fast Reactors Group LeaderLaboratory for Reactor Physics and Systems BehaviourNuclear Energy and Safety DepartmentOHSA/D115232 Villigen PSISwitzerlandE-mail: konstantin.mikityuk@psi.chTel: +41 56 310 23 85
Since 1992 I have been involved in research of safety-related aspects of various nuclear reactors with fast neutron spectrum: first at Russian Kurchatov Institute and Jan Van HerleBorn in Antwerp, Belgium. In Switzerland since 1983. Became Swiss citizen in 2004 out of conviction of principles of democracy and bottom-up participation. No double nationality. Village Council Member for 2 five-year mandates in 2006-2016.
1987 : Chemist from Basel University (CH).
1988 : Post-graduate IT diploma from Basel Engineering School.
1989 : Industry internship ABB Baden (CH).
1990-1993 : PhD Thesis EPFL, on Solid Oxide Fuel Cell cathode reaction mechanisms.
1994-1995 : Japanese Postdoctoral Fellowship in Tsukuba, Japan, on ceramic powders.
1995-2000 : Researcher at EPFL, Dpt. Chemistry : project responsible in PPM2 (materials), FP4-BriteEuram, NEDO (Japan), Swiss Gas Union (CH, oxygen membranes).
1998-2000 : Masters in Energy Technology, EPFL.
2000 : Cofounder of HTceramix SA (EPFL spin-off), now based in Yverdon (14 employees). Taken over by SOLIDpower in 2007, now 250 employees with 70 MCHF raised.
2000 : 1st Assistant and lecturer at LENI (STI-IGM) : fuel cell group responsible, projects on biogas (Federal Energy Office), woodgas (CCEM), fuel cell stacking (CTI, FP6, FNS), ceramic separation membranes (COST, FNS), microtubes (STI Seed), stability/lifetime/reliability in fuel cells (Electricité de France, swisselectric research). Currently 4 Ph D theses ongoing, 14 theses concluded, of which 5 colateral with SB and IMX. M.E.R. since Nov 2008.
Total funding raised so far >18 MCHF (50% as main applicant; 30% outside CH; 20% industry).
Scientific output : >135 peer-reviewed publications, >120 conference papers, 40 invited presentations (8 keynotes), >70 granted proposals.
Fluent in 5 languages (Dutch, French, German ( Swiss-german), English, Spanish).
Kamil SedlákTeaching & PhD PhD Students Daniel Louis Arthur Biek Courses Fusion and industrial plasma technologies PHYS-632 The course provides an overview of the technologies that are essential for fusion developments and for industrial plasmaapplications, highlighting the synergies between the two fields. The aim is to provide a combined theoretical andexperimental background to the various topics.
Andreas PautzTeaching & PhD PhD Students Sofia Portolan, Michel Saliba, Bishal Torrente, Alexis Paul Boris Claude Dupont-Bembinoff, Cynthia Camila Güttlein Past EPFL PhD Students Ting Zhu, Vladimir Vladimirov Brankov, Boris Aviv Hombourger, Damar Canggih Wicaksono, Petra Mala, Adolfo Rais, Valentyn Bykov, Daniel Jerôme Siefman, Evgeny Nikitin, Dionysios Chionis, Oskari Ville Pakari, Friederike Bostelmann, Jiani Gao, Efstathios Vlassopoulos, Alessandro Scolaro, Stefan Radman, Alexander Aures, Lubomír Bures, Ahmed Salah
Show more