Concept

Finite element method

The finite element method (FEM) is a popular method for numerically solving differential equations arising in engineering and mathematical modeling. Typical problem areas of interest include the traditional fields of structural analysis, heat transfer, fluid flow, mass transport, and electromagnetic potential. The FEM is a general numerical method for solving partial differential equations in two or three space variables (i.e., some boundary value problems). To solve a problem, the FEM subdivides a large system into smaller, simpler parts called finite elements. This is achieved by a particular space discretization in the space dimensions, which is implemented by the construction of a mesh of the object: the numerical domain for the solution, which has a finite number of points. The finite element method formulation of a boundary value problem finally results in a system of algebraic equations. The method approximates the unknown function over the domain. The simple equations that model these finite elements are then assembled into a larger system of equations that models the entire problem. The FEM then approximates a solution by minimizing an associated error function via the calculus of variations. Studying or analyzing a phenomenon with FEM is often referred to as finite element analysis (FEA). The subdivision of a whole domain into simpler parts has several advantages: Accurate representation of complex geometry Inclusion of dissimilar material properties Easy representation of the total solution Capture of local effects. Typical work out of the method involves: dividing the domain of the problem into a collection of subdomains, with each subdomain represented by a set of element equations to the original problem systematically recombining all sets of element equations into a global system of equations for the final calculation. The global system of equations has known solution techniques and can be calculated from the initial values of the original problem to obtain a numerical answer.

Official source

https://en.wikipedia.org/wiki/Finite_element_method

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related courses (32)

MATH-502: Distribution and interpolation spaces

The goal of this course is to give an introduction to the theory of distributions and cover the fundamental results of Sobolev spaces including fractional spaces that appear in the interpolation theory. Those notions are central to the study of partial dif ...

ME-326: Control systems and discrete-time control

Ce cours inclut la modélisation et l'analyse de systèmes dynamiques, l'introduction des principes de base et l'analyse de systèmes en rétroaction, la synthèse de régulateurs dans le domain fréquentiel et dans l'espace d'état, et la commande de systèmes dis ...

MATH-410: Riemann surfaces

This course is an introduction to the theory of Riemann surfaces. Riemann surfaces naturally appear is mathematics in many different ways: as a result of analytic continuation, as quotients of complex domains under discontinuous group actions, as algebraic ...

Related units (32)

Picasso Group

IEL - Administration

IMX - Administration

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Official source

https://en.wikipedia.org/wiki/Finite_element_method

About this result

Related courses (32)

MATH-502: Distribution and interpolation spaces

ME-326: Control systems and discrete-time control

MATH-410: Riemann surfaces

Related lectures (32)

Numerical Methods: Boundary Value Problems

Explores numerical methods for boundary value problems, including heat diffusion and fluid flow, using finite difference methods.

Finite Differences Proof

Explains the definition and calculation of finite difference centers with proofs and examples.

Theoreus Chain Role: Lipschitz Sit

Covers the Theoreus Chain Role for Lipschitz functions and its practical applications.

Related publications (32)

The semi-explicit nonsmooth Newmark-β time integrator for robust unilateral contact in dynamic fragmentation simulations

Numerical simulations of solids undergoing dynamic fragmentation, a problem characterized by dynamic fracture and dense contacts, require accurately capturing the transition from a solid continuum to a collection of interacting fragments. We use the finite-element method with the extrinsic cohesive zone model for fracture. For contact, conventional penalty-based methods often exhibit numerical instabilities in dynamic collision-rich settings. To address this, we adapt and validate a novel semi-explicit time

2027

On the prospects of interpolatory spline bases for accurate mass lumping strategies in isogeometric analysis

While interpolatory bases such as the Lagrange basis form the cornerstone of classical finite element methods, they have been replaced in the more general finite element setting of isogeometric analysis in favor of other desirable properties. Yet, interpolation is a key property for devising accurate mass lumping strategies that are ubiquitous in explicit dynamic analyses of structures. In this article, we explore the possibility of restoring interpolation for spline bases within isogeometric analysis for t

2026

Approximate time integration of the finite element semi-discrete solution in structural dynamics

Explicit time integration is the gold standard for simulating the deformation of complex bodies, sometimes made up of hundreds or more trimmed patches. Its efficiency stems from mass lumping techniques that substitute the consistent mass with a (usually diagonal) approximation. Although the impact of mass lumping has been well studied for classical finite element methods based on the Lagrange basis, it remains poorly understood when combined with newer discretization techniques employing more general non-in

EPFL2026

Related people (32)

Pablo Antolin Sanchez

Teaching & PhD PhD Students Philipp Christoph Weder, Davor Dobrota Past EPFL PhD Students as codirector Ondine Chanon Courses Analysis III MATH-202(c) The course studies the fundamental concepts of vector analysis and Fourier-Laplace analysis with a view to their use in solving multidisciplinary problems in scientific engineering. Analysis III (for IC) MATH-203(d) The course studies the fundamental concepts of vector analysis and Fourier-Laplace analysis with a view to thei

Stefano Francesco Burzio

Expertise Analysis and modeling of nonlinear phenomena occurring in mathematical physics. Hyperbolic partial differential equations. Finite element method. Education Mathematics | Mathematics 2015 – 2020 EPFL Directed by Joachim Krieger MAS / Diplôme d'enseignement pour le degré secondaire 2 | Pedagogy 2019 – 2020 HEP Vaud Master of Science | Mathematics 2011 – 2014 University of Turin Directed by Susanna

Annalisa Buffa

Teaching & PhD PhD Students Gonzalo Bonilla Moreno, Philipp Christoph Weder, Yannis Dirk Voet, Fabio Marcinno, Ferhat Sindy, Francesco Sala, Markus Renoldner, Mohamed Ben Abdelouahab, Davor Dobrota Past EPFL PhD Students Luca Coradello, Ondine Chanon, Riccardo Puppi Courses Numerical approximation of PDEs MATH-451 The course is about the derivation, theoretical analysis and implementation of the finite element method for the numerical approximation of partial differential equations in on

Guillaume Anciaux

ResearchResearch Topics My research can be decomposed in three main blocks:First, the main goal of my current research is the physical description of contact interactions. I performed numerous studies of this topic using different models from the continuum scale down to atomistic scale. Since atomic phenomena and macroscopic observations are linked, the physics of contact needs the simultaneous consideration of several scales. For instance, plasticity is a theory defined for the macroscopic scale whereas t

Parmenion Mavrikakis

Expertise Computational electromagnetics, integral equations, finite element analysis, metasurfaces, photonics, plasmonics and microwaves. Current Work Developing a C++ code for the modeling of light scattering in layered media with the surface integral equation method. I am a PhD student in the Electrical Engineering Department (EDEE) at École Polytechnique Fédérale de Lausanne (EPFL), affiliated with the Nanophotonics and Metrology Laboratory (NAM), part of the Microengineering Department (IEM) at EPFL. M

Jean-Marie Drezet

1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project)

Maher Kayal

Maher Kayal received M.S. and Ph.D degrees in electrical engineering from the Ecole Polytechnique Fédérale de Lausanne (EPFL, Switzerland) in 1983 and 1989 respectively. He has been with the Electronics laboratories of the Ecole Polytechnique Fédérale de Lausanne (EPFL, Switzerland) since 1990, where he is currently a professor and director of the Energy Management and Sustainability" section. He has published many scientific papers, coauthor of three text books dedicated to mixed-mode CMOS design and he holds eleven patents. His technical contributions have been in the area of analog and Mixed-signal circuits design including highly linear and tunable sensors microsystems, signal processing and green energy management. Prizes and Honors Electronics Letters journal Premium Award 2013, Outstanding Paper Award? IEEE Mixdes 2013 Basil Papadias paper Award, IEEE Powertech 2013 Best Paper Awards, Mixdes 2013 Best Paper Awards, ICCAS 2012 Outstanding Paper Award- IEEE Mixdes 2012. Poland Section IEEE ED Chapter special award in 2011. Credit Suisse Award for Best Teaching- 2009. The William M. Portnoy Award at the Energy Conversion Congress and Exposition , California Sept 2009. Best Paper Award - IEEE-Mixdes 2009. High Quality Paper - IEEE Power Tech Conference June 2009. Best Paper Award - IEEE-Mixdes 2007. Best Paper Award - IEEE-TTTC International Conference on Automation, Quality and Testing, Robotics - 2006. Best Application Specific Integrated Circuit at the International European Design and Test Conference ED&TC - 1997. Ascom Award for the Best Work in Telecommunication Fields 1990. Publications Books. Books: Methodology for the Digital Calibration of Analog Circuits and Systems, Marc Pastre & Maher Kayal. Springer Publisher- (ISBN 1-4020-4252-3)-2006. Structured Analog CMOS Design, Danica Stefanovic & Maher Kayal. Springer Publisher-(ISBN 978-1-4020-8572-7)-2008. Linear CMOS RF Amplifiers for Wireless Applications, Maher Kayal, Springer Publisher. (ISBN 978-90-481-9360-8)-2010. Coeditor of Microelectronics Education Kluwer Academic Publishers. (ISBN 1-4020-2072-4). -2004.

Dominique Pioletti

Dominique Pioletti received his Master in Physics from the Swiss Federal Institute of Technology Lausanne (EPFL) in 1992. He pursued his education in the same Institution and obtained his PhD in biomechanics in 1997. He developed original constitutive laws taking into account viscoelasticity in large deformations. Then he spent two years at UCSD as post-doc fellow acquiring know-how in cell and molecular biology. He was interested in particular to gene expression of bone cells in contact to orthopedic implant. In April 2006, Dominique Pioletti was appointed Assistant Professor tenure-track at the EPFL and is director of the Laboratory of Biomechanical Orthopedics. His research topics include biomechanics and tissue engineering of musculo-skeletal tissues; mechano-transduction in bone; development of orthopedic implant as drug delivery system. Since 2013, he has been promoted to the rank of Associate Professor.

Simone Deparis

Expertise Simone Deparis is a professor at EPFL specializing in applied mathematics, numerical analysis, and the didactics of university-level mathematics. His research spans computational modeling for biomedical applications and innovations in mathematics education, with a focus on equity, self-efficacy, and assessment reform in large STEM cohorts. Mission Our group conducts research at the intersection of applied mathematics and learning sciences. In applied mathematics, we focus on modeling and simulatio

Jérôme Paul Rémy Thevenot

Expertise Biomechanics and biomedical engineeringMedical devices and smart wearablesSignal and medical images processingPrototyping, 3D modeling and finite element analysis3D printing, silicone moldingClinical trials and animal experimentation Expertise Biomechanics and biomedical engineeringMedical devices and smart wearablesSignal and medical images processingPrototyping, 3D modeling and finite element analysisClinical trials and animal experimentation Education PhD Biomedicine | Thesis: Biomechanica

Related units (32)

Picasso Group

IEL - Administration

IMX - Administration

Related concepts (32)

Triangulation (geometry)

In geometry, a triangulation is a subdivision of a planar object into triangles, and by extension the subdivision of a higher-dimension geometric object into simplices. Triangulations of a three-dimensional volume would involve subdividing it into tetrahedra packed together. In most instances, the triangles of a triangulation are required to meet edge-to-edge and vertex-to-vertex. Different types of triangulations may be defined, depending both on what geometric object is to be subdivided and on how the subdivision is determined.

Boundary element method

The boundary element method (BEM) is a numerical computational method of solving linear partial differential equations which have been formulated as integral equations (i.e. in boundary integral form), including fluid mechanics, acoustics, electromagnetics (where the technique is known as method of moments or abbreviated as MoM), fracture mechanics, and contact mechanics. The integral equation may be regarded as an exact solution of the governing partial differential equation.

Multigrid method

In numerical analysis, a multigrid method (MG method) is an algorithm for solving differential equations using a hierarchy of discretizations. They are an example of a class of techniques called multiresolution methods, very useful in problems exhibiting multiple scales of behavior. For example, many basic relaxation methods exhibit different rates of convergence for short- and long-wavelength components, suggesting these different scales be treated differently, as in a Fourier analysis approach to multigrid.

Related exercises (9)

Excitation of a vertical harmonic oscillator

A mass m is suspended on a spring of natural length l₀ and of elastic constant k. The spring is attached to a piston. The vertical motion of the piston is described by the equation s(t)u2004=u2004s₀cosu2006(ωt)xa0.

Give explicit expressions for the external forces and determine the equation of motion.
Show that the equation of motion can be recast as, $\ddot{x}\left(t\right) + c_1\,x\left(t\right) = c_1\,s\left(t\right)\ ,$ where x(t)u2004=u2004z(t)u2005+u2005c₂ with z(t) the vertica

Study of density function

Consider the volume density of charge ρ(x,y,z)u2004=u2004ρ(x) of the figure on the left, infinite in the directions y and z, where: aρ₀₊u2004=u2004Au2006[Cu2006m⁻²]. a) Determine and graphically represent the electric field associated for all of the values of x. Determine and graphically represent the potential V(x), with the condition V(−a/2)u2004=u20040. b) Now consider the charge density ρ(x,y,z)u2004=u2004ρ(x) of the figure on the right side, where bρ⁰⁻u2004=u2004aρ₀₊u2004=u2004A. Determine and graphi

Potential energy of a homogeneous sphere

The electric field created by a homogeneous sphere of radius R, uniformly charged and of total charge Q is :

Related notebooks (9)

Exploring Chemical Potential for Fermions in 3D at Finite Temperature

This notebook gives a simple illustration to the variation of chemical potential for Fermions in 3D, following the Fermi-Dirac statistics in finite temperature. " In 3D, we have the density of states

\\rho \\propto \\sqrt{E}

. At zero temperature, the distribution of electrons just follows

g(E)=a \\sqrt{E}

and the Fermi energy is determined by the total occupied number

N_{occ}

E_f

is the energy such that

N_{occ}=\\int_{0}^{E_f} g(E) dE

\n", " \n", "In finite temperature, however, o

Modeling Epidemics with Signal Processing Techniques

Epidemics and Signal Processing[1]¶

                                      [2]Paolo Prandoni, [3]LCAV, EPFL

In [1]: import matplotlib.pyplot as plt import numpy as np import scipy.signal as sp import seaborn as sns sns.set() In [2]: plt.rcParams["figure.figsize"] = (14,4) The basic reproduction number[4]¶ The propagation mechanism of an epidemic such as the one caused by SARS-CoV-2 virus can be roughly modeled, at least in its inital phase, as a process in which each infected individ

Implementing a Fractional Resampler using Local Lagrange Interpolation

FIR Resampling[1]¶

                                      [2]Paolo Prandoni, [3]LCAV, EPFL

In this notebook we will implement a simple fractional resampler that uses local Lagrange interpolation. The resampler can be used to perform any rational sampling rate change (but beware of aliasing when downsampling!) In [1]: import numpy as np import IPython from scipy.io import wavfile Local Lagrange interpolation[4]¶ To perform resampling we will need to compute subsample values and, in

Advantages of Digital Transmission over Analog Transmission

[1]Paolo Prandoni, [2]EPFL Analog vs Digital Transmission In this notebook we will explore the advantages of digital transmission over analog transmission. We will model the case of transmission over a long (e.g. transoceanic) cable in which several repeaters are used to compensate for the attenuation incurred by the signal. In [1]: import matplotlib import matplotlib.pyplot as plt import numpy as np import IPython from scipy.io import wavfile plt.rcParams["figure.figsize"] = (14,4)

Designing FIR Filters Using the Parks-McClellan Algorithm

The Parks-McClellan Filter Design Method[1]¶

                                      [2]Paolo Prandoni, [3]LCAV, EPFL

The Parks-McClellan (PM) algorithm is a clever application of advanced polynomial fitting techniques to the problem of FIR filter design. In this notebook we will explore the key ideas behind the method by considering the design of a simple Type-I lowpass filter. NOTE: This notebook uses interactive widgets. If the interactive controls do not work or show up, please fo