Giovanni De CesareExpertise
Numerical simulation and physical modeling of hydraulic works and schemes; reservoir sedimentation and turbidity currents; reservoir sediment management; Ultrasonic Doppler flow measurement; river training work and restoration; soil bioengineering and nature based solutions; fluvial eco-morphology; rapid transients in pressurized waterways; technology transfer, commissioned studies and expert reports in applied hydraulics, hydraulic constructions and infrastructures; organization of continuous edu
Yves PerriardYves Perriard was born in Lausanne in 1965. He received the M. Sc. in Microengineering from the Swiss Federal Institute of Technology - Lausanne (EPFL) in 1989 and the Ph D. degree in 1992. Co-founder of Micro-Beam SA, he was CEO of this company involved in high precision electric drive. Senior lecturer from 1998 and professor since 2003, he is currently director of Laboratory of Integrated Actuators. His research interests are in the field of new actuator design and associated electronic devices. In 2009, he is appointed Vice-Director of the Microengineering Institute in Neuchâtel until 2011. In 2013 the Federal Council has named him the the CTI commission in Bern. In 2014 he is appointed guest professor at Zhejiang University in China. In 2017, the lab is granted by the Werner Siemens Foundation of an amount of 12 millions CHF in order to set up a new Center for Artificial Muscules. Since 2018, he is Expert with Innosuisse, the new Swiss Innovation Agency. http://scholar.google.com/citations?hl=fr&user=V2onuO8AAAAJ https://actu.epfl.ch/news/a-12-million-franc-donation-to-create-a-center-for/ Sophie LufkinFORMATION
2010 - Thèse de doctorat au sein de l'EDAR (Ecole doctorale Architecture, Ville, Histoire) sur la densification des friches ferroviaires, co-dirigée par les Prof. Inès Lamunière et Vincent Kaufmann
2005 - "Master of Art" en architecture, sous la direction des Prof. Patrick BERGER et Inès LAMUNIERE
2003 - Année d'échange à l'ETHZ
1999 - Entrée à l'EPFL, section architecture
1998 - Maturité type B, Collège Claparède, Genève
EXPERIENCE PROFESSIONNELLE
2010 - Architecte, Cheffe de projet chez LAR - Fernando Romero, México
2006 - Assistante de recherche à lEPFL au Laboratoire darchitecture et mobilité urbaine (LAMU), projet de recherche PNR54 "Densification des friches ferroviaires"
2005 - Architecte chez Devanthéry & Lamunière, Genève
2004 - Stage darchitecture, Eric Maria, Genève
2003 - Stage darchitecture, Sumi & Burkhalter, Zurich
2001 - Stage darchitecture, Devanthéry & Lamunière, Genève
RECOMPENSES ET BOURSES
2001 - Prix SIA Vaudoise pour le projet "Fondation Ella Maillart à Chandolin"
2005 - Prix de l'Association des diplômes A3-EPFL
2008 - Bourse Erna Hamburger
LANGUES
Français (maternelle), allemand et anglais (courantes), portugais (notions)
Paolo GermanoFORMATION
Mars 1990 : Engagement au Laboratoire d'électromécanique et de machines électriques (LEME), devenu entre temps le laboratoire d'actionneurs intégrés (LAI), comme assistant puis comme fonctionnaire scientifique.
Janvier 1990 : Diplôme d'ingénieur EPF en microtechnique.
Juillet 1985 : Maturité de type scientifique.
-
-
- EXPERIENCES ET DOMAINES DE COMPETENCES
-
Modélisation et simulation de l'alimentation des moteurs de l'avion Solar Impulse sur la base des résultats de la modélisation par éléments finis (FEM) de la structure magnétique Développement du banc de mesure (mécanique et software) du moteur Solar Impulse (dès mars 2004);
-
Dans le cadre d'un Projet CTI en collaboration avec l'entreprise Medtronic (Projet ColoStim), développement d'un appareil de traitement de la constipation consistant en des électrodes implantées le long du colon et alimentées par induction, à haute fréquence, à l'aide d'une bobine primaire placée autour du thorax du patient (janvier 2006 - mars 2007);
-
Développement du modèle équivalent d'une montre à glace tactile et analyse de l'effet des décharges électrostatiques sur cette montre. Projet CTI en collaboration avec l'entreprise ETA-Swatch Group (avril 2003 à octobre 2004);
-
Développement d'un système de transfert d'énergie pour navettes automotrices de machines d'assemblage. Projet CTI en collaboration avec l'entreprise Montech AG (octobre 2001 à octobre 2002);
-
Développement d'une installation de transfert d'énergie pour des wagonnets de transport de rouleaux pour l'industrie du papier avec l'entreprise Valmet AG (Groupe Metso Paper) (2001);
-
Développement d'un banc de mesure pour actionneurs linéaires dans le cadre d'un mandat avec l'entreprise Sonceboz SA (mars 1998 - juillet 2000);
-
Développement d'une installation de transfert d'énergie pour un convoyeur d'outils dans le cadre d'un mandat avec l'entreprise MCM SpA (Italie) (juillet 1998 avril 1999 et déc. 1999 avril 2000);
-
Développement d'un banc de test pour vibreur électromécanique dans le cadre d'un mandat avec l'entreprise ASULAB SA à Marin (octobre décembre 1999);
-
Développement et responsabilité d'une installation de démonstration d'un Système de transport automatique à transmission d'énergie par induction - Projet Serpentine 2 PSEL (déc. 1996 juin 1999);
-
Développement d'un banc de mesure et d'analyse pour moteurs à courant continu dans le cadre d'un projet d'impulsion RAVEL (sept. 1995 - mars 1997);
-
Développement d'un convertisseur de fréquence à résonance de 2,4 kW pour l'alimentation d'un transformateur sans fer dans le cadre du transfert d'énergie sans contacts Projet Serpentine PSEL (février 94 déc. 1995);
-
Développement d'un banc de mesure pour moteurs pas à pas dans le cadre d'un mandat avec l'entreprise Sonceboz SA (mars 1992 nov. 1995);
-
Développement d'un convertisseur direct de fréquence AC/AC de basse puissance dans le cadre du projet du cur artificiel Suisse (mars 1990 - mars 1992);
-
Suivi d'une vingtaine de projets de semestre et de master EPFL;
-
Divers projets de moindre envergure (alimentations, démonstrateurs, acquisitions de données, micro-informatique, circuits imprimés).
PUBLICATIONS
DOMAINE DU TRANSFERT D'ENERGIE PAR INDUCTION
M. Jufer, L. Cardoletti, B. Arnet, P. Germano, Ch. Koechli, N. Macabray, M. Perrottet, "Dispositif de transmission d'énergie électrique à un véhicule, sans contact, par induction - Projet PSEL N° 16 - Magnéto-glisseur", Rapport de synthèse 1995, EPFL-DE-LEME, Lausanne - Suisse, 18 octobre 1995;
M. Jufer, L. Cardoletti, P. Germano, B. Arnet, M. Perrottet, N. Macabrey, "Induction Contactless Energy Transmission System for an Electric Vehicle", ICEM96, International Conference on Electrical Machines, Vigo, Sept. 10-12, 1996, Vol II, pp. 343-347;
P. Germano, M. Jufer, "Contactless power transmission: Frequency tuning by a maximum power tracking method", EPE '97, 7th European Conference on power electronics and applications, Trondheim, Sept. 8-10, 1997, Vol IV, pp. 693-697;
M. Jufer, L. Cardoletti, P. Germano, B. Arnet, M. Perrottet, Swiss Federal Institute of Techno-logy, DE-LEME, 1015 Lausanne, Switzer-land, "Inductively powered automatic vehicles - Ser-pen-tine", EVS-15 '98, 15th International Electric Vehicle Symposium and Exhibition, Brussel, Belgium, Sept. 29 - Oct. 3, 1998, pp. 403-404;
P. Germano, Nicolas Macabrey, M. Jufer, Swiss Federal Institute of Technology, DE-LEME, 1015 Lausanne, Switzerland, "Contactless Power Transmission: Linear Positioning of the Moving Element", EPE '99, 8th European Conference on Power Electronics and Applications, Lausanne, 7-9 September, 1999, Art Nb 685;
P. Germano, M. Jufer, L. Cardoletti, B. Arnet, Ch. Koechli, N. Macabray, M. Perrottet, "Système de transport automatique à transmission d'énergie par induction. - Projet PSEL N° 115", Rapport final 1999, EPFL-DE-LEME, Lausanne - Suisse, 31 août 1999;
P. Germano, I. Stefanini, W. Montella, L. Cardoletti, Y. Perriard, "Système de transfert d'énergie pour navette de machines d'assemblage Projet CTI n° 5780.1 KTS", Rapport final, EPF Lausanne-LAI, Suisse, mars 2004;
I. Stefanini, P. Germano, L. Cardoletti, W. Montella, Y. Perriard, "Inductive Charge System for Assembly Plant Shuttles", CD-ROM, EPE 2003, Toulouse, (France), 2-4 Septembre 2003;
P. Germano, I. Stefanini, Y. Perrirad, "Stimulation colique pour le traitement des troubles de la motilité Projet ColoStim Projet CTI n° 7362.2 LSPP-LS", Rapport final, EPF Lausanne-LAI, Suisse, mai 2007.
DOMAINES DES BANCS DE MESURE - MESURES
P. Germano, "Système automatique de mesure", Rapport technique vol. I & II, EPF-Lausanne, 1995;
P. Germano, Ch. Kuert, "Banc de mesures automatisé pour entraînements électriques", Présentation et mode d'emploi, EPF-Lausanne, 1997;
P. Germano, Ch. Kuert, M. Jufer, Swiss Federal Institute of Technology, DE-LEME, 1015 Lausanne, Switzerland, "Automated test bench for electric drives: Modular layout of soft- and hardware", EPE '99, 8th European Conference on Power Electronics and Applications, Lausanne, 7-9 September, 1999, Art Nb 683;
Y. Perriard, P. Germano, I. Verettaz, "Banc de test pour vibreur électromécanique", Rapport technique, EPF-Lausanne, janvier 2000;
P. Germano, Ch. Kuert, M. Jufer, Swiss Federal Institute of Technology, DE-LEME, 1015 Lausanne, Switzerland, "DSP controlled automated Test Bench for linear Actuators Design and Choices", EPE 2001, 9th European Conference on Power Electronics and Applications, Graz, 27-29 August, 2001, Art Nb 709;
P. Germano, M. Crivii, D. Demarco, Y. Perriard, Swiss Federal Instutute of Technology, LAI, 1015 Lausanne, Switzerland & L. Paratte, R. Marquis, Service Unit RD, ETA SA (Swatch Group), 2540 Granges, Switzerland, "Analysis and Modeling of Electrostatic Discharge in a Tactile Glass Featured Watch", IAS 2004, 39th Annual Meeting, Seattle, WA, USA, October 3-7, 2004;
P. Germano, M. Crivii, D. Demarco, Y. Perriard, Swiss Federal Instutute of Technology, LAI, 1015 Lausanne, Switzerland & L. Paratte, R. Marquis, Service Unit RD, ETA SA (Swatch Group), 2540 Granges, Switzerland, "Analysis and Modeling of Electrostatic Discharge in a Tactile Glass Featured Watch", IEEE Transaction on Industry Applications, Volume 43, Issue 4, July-aug. 2007, Page(s): 1091-1098; Mario PaoloneMario Paolone received the M.Sc. (with honors) and the Ph.D. degree in electrical engineering from the University of Bologna, Italy, in 1998 and 2002, respectively. In 2005, he was appointed assistant professor in power systems at the University of Bologna where he was with the Power Systems laboratory until 2011. In 2010, he received the Associate Professor eligibility from the Politecnico di Milano, Italy. Since 2011 he joined the Swiss Federal Institute of Technology, Lausanne, Switzerland, where he is now Full Professor, Chair of the Distributed Electrical Systems laboratory and Head of the Swiss Competence Center for Energy Research (SCCER) FURIES (Future Swiss Electrical infrastructure). He was co-chairperson of the technical programme committees of the 9th edition of the International Conference of Power Systems Transients (IPST 2009) and of the 2016 Power Systems Computation Conference (PSCC 2016). He was chair of the technical programme committee of the 2018 Power Systems Computation Conference (PSCC 2018). In 2013, he was the recipient of the IEEE EMC Society Technical Achievement Award. He was co-author of several papers that received the following awards: best IEEE Transactions on EMC paper award for the year 2017, in 2014 best paper award at the 13th International Conference on Probabilistic Methods Applied to Power Systems, Durham, UK, in 2013 Basil Papadias best paper award at the 2013 IEEE PowerTech, Grenoble, France, in 2008 best paper award at the International Universities Power Engineering Conference (UPEC). He was the founder Editor-in-Chief of the Elsevier journal Sustainable Energy, Grids and Networks and was Associate Editor of the IEEE Transactions on Industrial Informatics. His research interests are in power systems with particular reference to real-time monitoring and operation, power system protections, power systems dynamics and power system transients. Mario Paolone is author or coauthor of over 300 scientific papers published in reviewed journals and international conferences.
Johan AuwerxJohan Auwerx is Professor at the École Polytechnique Fédérale in Lausanne, Switzerland, where he occupies the Nestle Chair in Energy Metabolism. Dr. Auwerx has been using molecular physiology and systems genetics to understand metabolism in health, aging and disease. Much of his work focused on understanding how diet, exercise and hormones control metabolism through changing the expression of genes by altering the activity of transcription factors and their associated cofactors. His work was instrumental for the development of agonists of nuclear receptors - a particular class of transcription factors - into drugs, which now are used to treat high blood lipid levels, fatty liver, and type 2 diabetes. Dr. Auwerx was amongst the first to recognize that transcriptional cofactors, which fine-tune the activity of transcription factors, act as energy sensors/effectors that influence metabolic homeostasis. His research validated these cofactors as novel targets to treat metabolic diseases, and spurred the clinical use of natural compounds, such as resveratrol, as modulators of these cofactor pathways.
Johan Auwerx was elected as a member of EMBO in 2003 and is the recipient of a dozen of international scientific prizes, including the Danone International Nutrition Award, the Oskar Minkowski Prize, and the Morgagni Gold Medal. His work is highly cited by his peers with a h-factor of over 100. He is an editorial board member of several journals, including Cell Metabolism, Molecular Systems Biology, The EMBO Journal, Journal of Cell Biology, Cell, and Science. Dr. Auwerx co-founded a handful of biotech companies, including Carex, PhytoDia, and most recently Mitobridge, and has served on several scientific advisory boards.
Dr. Auwerx received both his MD and PhD in Molecular Endocrinology at the Katholieke Universiteit in Leuven, Belgium. He was a post-doctoral research fellow in the Departments of Medicine and Genetics of the University of Washington in Seattle.
Ian SmithPhD, Cambridge University, 1982 Interests 1 Active shape control for structures for deployment and where serviceability criteria governs 2 Biomimetic structures (learning, self-diagnosis, self-repair) 3 Infrastructure management support through structural identification 4 Advanced computer-aided engineering applications of stochastic optimization and search, multi-criteria analysis, system uncertainties (measurement and modelling), multi-modal approaches (combining statistics with behavior models) More details : see https://www.epfl.ch/labs/imac/research/iansmith/ Kamiar AminianKamiar Aminian received the M.S. degree in electrical engineering in 1982, the Ph.D degree in biomedical engineering in 1989 and the Postgraduate degree on technical computing in 1993 from Ecole Polytechnique Fédérale de Lausanne (EPFL). He was assistant professor (1994-1996) with Sharif University of Technology (Tehran). He joint EPFL in 1996 where he is currently Professor of medical instrumentation and the director of the Laboratory of Movement Analysis and Measurement in the Institute of Bioengineering of EPFL. His research interests include methodologies for human movement monitoring and analysis in real world conditions mainly based on wearable technologies and inertial sensors with emphasis on gait, physical activity and sport. His research aims to perform outcome evaluation in orthopaedics, to improve motor function and intervention programs in aging and patients with movement disorders and pain, and to identify metrics of performance in sport science.
Kamiar Aminian is a member of the International Society of Posture and Gait Research, the Institute of Electrical and Electronics Engineers, the European Society of Movement Analysis in Adults and Children, the Prevention of fall Network Europe, the Intentional Society of Biomechanics and the President of the 3D analysis of the human movement group. He is author or co-author of more than 450 scientific papers published in reviewed journals and presented at international conferences and holds 10 patents related to medical devices.
Full CV
ORCID
Jan Van HerleBorn in Antwerp, Belgium. In Switzerland since 1983. Became Swiss citizen in 2004 out of conviction of principles of democracy and bottom-up participation. No double nationality. Village Council Member for 2 five-year mandates in 2006-2016.
1987 : Chemist from Basel University (CH).
1988 : Post-graduate IT diploma from Basel Engineering School.
1989 : Industry internship ABB Baden (CH).
1990-1993 : PhD Thesis EPFL, on Solid Oxide Fuel Cell cathode reaction mechanisms.
1994-1995 : Japanese Postdoctoral Fellowship in Tsukuba, Japan, on ceramic powders.
1995-2000 : Researcher at EPFL, Dpt. Chemistry : project responsible in PPM2 (materials), FP4-BriteEuram, NEDO (Japan), Swiss Gas Union (CH, oxygen membranes).
1998-2000 : Masters in Energy Technology, EPFL.
2000 : Cofounder of HTceramix SA (EPFL spin-off), now based in Yverdon (14 employees). Taken over by SOLIDpower in 2007, now 250 employees with 70 MCHF raised.
2000 : 1st Assistant and lecturer at LENI (STI-IGM) : fuel cell group responsible, projects on biogas (Federal Energy Office), woodgas (CCEM), fuel cell stacking (CTI, FP6, FNS), ceramic separation membranes (COST, FNS), microtubes (STI Seed), stability/lifetime/reliability in fuel cells (Electricité de France, swisselectric research). Currently 4 Ph D theses ongoing, 14 theses concluded, of which 5 colateral with SB and IMX. M.E.R. since Nov 2008.
Total funding raised so far >18 MCHF (50% as main applicant; 30% outside CH; 20% industry).
Scientific output : >135 peer-reviewed publications, >120 conference papers, 40 invited presentations (8 keynotes), >70 granted proposals.
Fluent in 5 languages (Dutch, French, German ( Swiss-german), English, Spanish).
