Beatrice MalchiodiTeaching & PhD Courses Limestone-Calcined Clay - Cement : Characterisation methods MSE-660(a) Le but est de former doctorants et post doctorants aux méthodes de charactérisation des ciments composés comme la microstructure, la diffraction des rayons X, la calorimétrie, la formulation et la durabilité dans le cadre des actions internationales du project LC3 financé par la DDC. Limestone-Calcined Clay - Cement : Characterisation methods (SPRING) MSE-660(b) Le but est de former
Enrique Corres SojoTeaching & PhD Courses TRC LC3 Research Platform Fribourg PENS-308 The UE TRC-LC3 Research Platform Fribourg will develop prototypes of structural elements in textile reinforced concrete (TRC) and Limestone Calcined Clay Cement (LC3) concrete that allow the continuation of the TRC prototype pavilion started at EPFL in 2019. The UE will take place in EPFL Fribourg.
David Carlos Fernandez-Ordoñez HernandezExpertise
Construction.Structures.Concrete.Prefabrication.History of Construction.
Teaching & PhD Courses Design of precast concrete structures CIVIL-414 The course deals with the design of precast reinforced concrete structures, both for bridges and for buildings. The course is focused in learning by projects supplemented by some lectures by the teachers.The students will work in groups to design a precast structure. Drawing structures CIVIL-126 The Drawing Structures I wil
Patricia GuaitaExpertise
pedagogy of makingdrawing as an actionmultidisciplinary projectsdesign methodologies in 1:1 fabricationexperiential learning processesknowledge transfer with the Global Southdiversity and care
Patricia Guaita is an architect, researcher, and educator with expertise in drawing as an action and social and sustainable research projects. Her work focus on design methodologies, which incorporate drawing by hand, 1:1 fabrication, spatial and tectonic analysis, and the development of construction protoco
Philippe BuffatBorn in Lausanne (Switzerland) in 1942. EPUL physics engineer diploma in 1967 and EPFL PhD in physics in 1976. From 1966 he studies at the Experimental Physics Laboratory (Prof. J.P. Borel) the physical properties peculiar to the very small size metal crystals and gets a PhD degree for his thesis "Abaissement de la température de fusion de petits cristaux d'or par effet de taille thermodynamique" (Lowering of the melting temperature of small gold crystals by thermodynamic size effect). In 1971, he starts to develop an electron microscopy facility available to all EPFL students and researchers (nowadays Centre Interdisciplinaire de Microscopie Electronique CIME) that he manages till 2007. In parallel he teaches the principles of electron microscopy and the Experimental methods of physics at the Physics/Basic Sciences School (SB). In addition, he trains a large part of the facility users. Honorary professor BS/EPFL he carries-out a free-lance research at CIME and in collaboration with the Institute of Crystallography of the Russian Academy of Sciences (ICRAS, Moscow) and the International Centre of Electron Microscopy for Material Science (IC-EM AGH Krakow) This activity covers all the techniques related to transmission and scanning electron microscopy applied to materials science and solid-state physics. His interest is directed towards the structure of nanocrystals, their size effects and behavior under strong electron irradiation, the phase transitions in perovskites, the characterization of nanophases, multilayer and interface structures of crystalline materials and bioceramics. More recently a large research part has moved to understanding/pointing-out the adequacy between the limits of the instruments and their interpretation means in regard of their use in a multiusers facility with a large turnover and a wide range of materials/structures. He is past-president (2006-2007) of the Société Française des Microscopies (Sfµ), honorary member of the Sfµ and of the Swiss Society of Optics and Microscopy (SSOM).
Esther AmstadEsther Amstad studied material science at ETH in Zurich. She also carried out her PhD thesis at the same University under the supervision of Prof. Marcus Textor; for her thesis, she worked on the surface modification and steric stabilization of oxide nanoparticles. As a postdoctoral fellow, she joined the experimental condensed soft matter group of David A. Weitz at Harvard University where she used droplet based microfluidics to assemble different types of functional micro- and nanomaterials. In addition, she developped new microfluidic devices that enable the production of very small, airborne drops as well as devices that produce highly monodisperse emulsion drops at a very high throughput. In June 2014, Esther joined the material science department (IMX) of EPFL where she is leading the Soft Materials Laboratory (SMAL).
Edgard Gnansounou
-
1983 Ing. Civil EPFL
-
1991 Dr ès Sciences techniques, EPFL
-
Directeur du Laboratoire de systèmes énergétiques (LASEN) de 2003 à 2008
-
Dès 2008, Responsable du groupe de Recherche en Bioénergie et Planification énergétique
-
Co-fondateur du bureau d'étude ENERS Energy Concept
-
Président de la Fondation SUD (Solidarités Universitaires pour le Développement)
Je suis membre de différentes associations professionnelles parmi lesquelles figuent le Conseil Mondial de l'énergie (CME) et l'Association internationale pour l'économie de l'énergie (AIEE). Comme membre du groupe d'étude du CME sur les vulnérabilités, j'ai développé les métriques utilisées pour évaluer la vulnérabilité énergétique des pays industrialisés.
Depuis janvier 2008 : membre du Comité d'édition du journal international Bioresource Technology.
Depuis 2009: membre du Comité de la "European Biofuels Technology Platform" Corsin BattagliaCorsin Battaglia directs the laboratory Materials for Energy Conversion at Empa, the Swiss Federal Laboratories for Materials Science and Technology, and is Adjunct Professor of Electrical Engineering at ETH Zurich, Department of Information Technology and Electrical Engineering and Adjunct Professor of Materials Science at EPFL, School of Engineering, Institute of Materials. His research focuses on developing new materials and scalable manufacturing processes for next-generation sustainable energy storage,
Francesco StellacciFrancesco Stellacci graduated in Materials Engineering at the Politecnico di Milano in 1998 with a thesis on photochromic polymers with Prof. Giuseppe Zerbi and Mariacarla Gallazzi. In 1999 he moved to the Chemistry Department of the University of Arizona for as a post-doc in the group of Joe Perry in close collaboration with the group of Seth Marder. In 2002 he moved to the Department of Materials Science and Engineering at the Massachusetts Institute of Technology as an assistant professor. He was then promoted to associate without (2006) and with tenure (2009). In 2010 he moved to the Institute of Materials at EPFL as a full Professor. He holds the Alcan EP Chair. Francesco was one of the recipients of the Technology Review TR35 "35 Innovator under 35" award in 2005, and the Popular Science Magazine "Brilliant 10" award in 2007. He has been a Packard Fellow starting 2005.
Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Marie Estelle Solange ViolayExpertise
-Rock mechanics-Rock physics-Fault and earthquake mechanics-Hydro-mechanical couplings
Teaching & PhD PhD Students Cindy Mikaelian, Francesco Lazari, Franco Matías Robbiano Muñoz, Karin Andrea Hofer Apostolidis, Andrea Mazzeo Past EPFL PhD Students Felipe Orellana, Mateo Acosta, Chiara Cornelio, Corentin Noël, Federica Paglialunga, Antoine Guggisberg Courses Designing Testing Machines for Geomechanics ME-700 Develop your own machines to meet your scientific needs. Learn how to bu
Karen ScrivenerDe nationalité anglaise, Karen Scrivener est née en 1958. Au cours de sa carrière, ses travaux et sa recherche traitaient des domaines suivants: Identification du développement microstucturale pendant l'hydratation du ciment. Elaboration d'une approche multitechnique pour étudier la microstucture des ciments et bétons, avec accent sur la quantification par analyse des images d'électrons retrodiffusés. Caractérisation de l'auréole de transition de la pâte de ciment autour des granulats. Compréhension des processus de dégardation des bétons, en particulier le gonflement lié à la formation de l'éttringite retardée dans les bétons étuvés.
Rizlan Bernier-LatmaniHIGHER EDUCATION
Summer course: Advances in Genome Technology and Bioinformatics Course at the Marine Biology Laboratory in Woods Hole, MA. October 2005.
Ph.D. 2001 Civil and Environmental Engineering, Stanford University, CA
(Advisor, Jim Leckie, Biodegradation of uranyl (UO22 )-complexed citrate and implications for uranyl mobility in the subsurface)
M.S. 1995 Civil and Environmental Engineering, Stanford University, CA
B.S. 1993 Natural Resources with Honors, Cornell University, Ithaca, NY
PROFESSIONAL EMPLOYMENT
2013-present Associate professor with tenure, School of Architecture, Civil and Environmental Engineering, Swiss Federal Institute of Technology, Lausanne
2005-2013 Assistant professor tenure track, School of Architecture, Civil and Environmental Engineering, Swiss Federal Institute of Technology, Lausanne
2001-2005 Post-Graduate Researcher, Scripps Institution of Oceanography, La Jolla, CA (PI: Brad Tebo)
1995-2001 Graduate Research Assistant, Stanford University (Advisor: Jim Leckie)
RESEARCH INTERESTS
Gemicrobiology, metal-bacteria interactions, biological reduction and oxidation of metals, biological nanoparticle formation; Characterization of microbial communities in terrestrial environments; Using genomic, microscopic and spectroscopic tools to understand metal transformations by microorganisms.
ACADEMIC HONORS
Rotary Foundation University Professor grant, 2004.
Swiss National Science Foundation Post-doctoral Fellowship, 2001.
Leon B. Reynolds Memorial Scholarship in the School of Engineering at Stanford University, 1995-96.
Graduated with Honors from Cornell University, 1993.
BIBLIOMETRY
http://www.researcherid.com/rid/E-4398-2011
ResearcherID: E-4398-2011 Harm-Anton KlokExpertise
Polymer design at nanoscaleBiologically-inspired polymers
Mission
Research at the Laboratory of Polymer (LP) focuses on the development of novel advanced polymeric materials with potential applications in optics, electronics or medicine. The philosophy is that precise control over nanoscale structure is an important prerequisite to tailor polymer properties. To this end, a “bottom-up” approach is followed, which starts with designing a new material at the molecular level, in order to be able to pr
Raffael BaurExpertise
Architect, teacher and researcher. Expertise in sustainable and circular construction systems, detailing, the art and history of craft and fabrication in relation to space and tectonics. Experimental research in timber- and plywood construction, folded sheet metal and textile reinforced concrete (with civil engineers).
Expertise
Architect, teacher and researcher. Expertise in sustainable and circular construction systems, detailing, the art and history of craft and fabrication in relation to space
