Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Jet engine

Related publications (28)

Smart Acoustic Lining for UHBR Technologies Engine Part 1: Design of an Electroacoustic Liner and Experimental Characterization Under Flow in Rectangular Cross-Section Ducts

Hervé Lissek, Maxime Volery

The new generation of Ultra-High-By-Pass-Ratio (UHBR) turbofan engine while considerably reducing fuel consumption, threatens higher noise levels at low frequencies because of its larger diameter, lower number of blades and rotational speed. This is accomp ...

American Institute of Aeronautics and Astronautics2024

Domain adaptation via alignment of operation profile for Remaining Useful Lifetime prediction

Olga Fink, Ismail Nejjar, Mengjie Zhao

Effective Prognostics and Health Management (PHM) relies on accurate prediction of the Remaining Useful Life (RUL). Data-driven RUL prediction techniques rely heavily on the representativeness of the available time-to-failure trajectories. Therefore, these ...

Elsevier2024

The Advection Boundary Law in presence of mean-flow and spinning modes

In the attempt to reduce fuel consumption, a new generation of Ultra-High-By-Pass-Ratio (UHBR) turbofans have been introduced in the aeronautic industry which are structurally noisier especially at lower frequencies, because of their larger diameter, lower ...

SPIE2024

Interpretative 3D MHD modelling of deuterium SPI into a JET H-mode plasma

Umar Sheikh, Haomin Sun, Mengdi Kong, Cristian Sommariva

The pre-thermal quench (pre-TQ) dynamics of a pure deuterium ( D 2 ) shattered pellet injection (SPI) into a 3 MA / 7 MJ JET H-mode plasma is studied via 3D non-linear MHD modelling with the JOREK code. The interpretative modelling captures the overall evo ...

IOP Publishing Ltd2024

Search for medium effects using jets from bottom quarks in PbPb collisions at √sNN = 5.02 TeV

Jian Wang, Matthias Finger, Qian Wang, Yiming Li, João Miguel das Neves Duarte, Matthias Wolf, Varun Sharma, Yi Zhang, Lei Zhang, Tian Cheng, Yixing Chen, Alexis Kalogeropoulos, Ioannis Papadopoulos, Hua Zhang, Siyuan Wang, Xin Chen, Michele Bianco, Sebastiana Gianì, Sun Hee Kim, Davide Di Croce, Jian Zhao, Rakesh Chawla, Jan Steggemann, Konstantin Androsov, Anna Mascellani, Federica Legger, Matteo Galli, Gabriele Grosso

The first study of the shapes of jets arising from bottom (b) quarks in heavy ion collisions is presented. Jet shapes are studied using charged hadron constituents as a function of their radial distance from the jet axis. Lead-lead (PbPb) collision data at ...

Elsevier2023

Robust tunable acoustic impedance control on electroacoustic resonators for aircraft noise reduction

Maxime Volery

Air traffic noise emissions are responsible for a significant part of the overall environmental noise, especially in the vicinity of airports. Exposure to environmental noise is known to negatively impact health and to be associated with cardiovascular dis ...

EPFL2023

Measurement of the top quark pole mass using t(t)over-bar+jet events in the dilepton final state in proton-proton collisions at √s=13 TeV

A measurement of the top quark pole mass m(t)(pole) in events where a top quarkantiquark pair (t (t) over bar) is produced in association with at least one additional jet ( t (t) over bar +jet) is presented. This analysis is performed using proton-proton c ...

Springer Nature2023

Uncertainty quantification in machine learning for engineering design and health prognostics: A tutorial

Olga Fink, Luca Biggio

On top of machine learning (ML) models, uncertainty quantification (UQ) functions as an essential layer of safety assurance that could lead to more principled decision making by enabling sound risk assessment and management. The safety and reliability impr ...

2023

Measurement of the differential t(t)over-bar production cross section as a function of the jet mass and extraction of the top quark mass in hadronic decays of boosted top quarks

A measurement of the jet mass distribution in hadronic decays of Lorentz-boosted top quarks is presented. The measurement is performed in the lepton + jets channel of top quark pair production (t (t) over bar) events, where the lepton is an electron or muo ...

Springer2023

Search for narrow resonances in the b-tagged dijet mass spectrum in proton-proton collisions at √s=13 TeV

Jian Wang, Matthias Finger, Qian Wang, Yiming Li, João Miguel das Neves Duarte, Matthias Wolf, Varun Sharma, Yi Zhang, Lei Zhang, Tian Cheng, Yixing Chen, Alexis Kalogeropoulos, Ioannis Papadopoulos, Hua Zhang, Siyuan Wang, Jessica Prisciandaro, Xin Chen, Michele Bianco, Sebastiana Gianì, Sun Hee Kim, Davide Di Croce, Guido Andreassi, Arvind Shah, Jian Zhao, Rakesh Chawla, Jan Steggemann, Konstantin Androsov, Anna Mascellani, Federica Legger, Gabriele Grosso

A search is performed for narrow resonances decaying to final states of two jets, with at least one jet ffiffioriginating from a b quark, in proton-proton collisions at p s = 13 TeV. The data set corresponds to an integrated luminosity of 138 fb-1 collecte ...

American Physical Society2023

Integrated modelling of neon impact on JET H-mode core plasmas

Yann Camenen, Michele Marin

Nuclear fusion reactor plasmas will need to exhaust a significant proportion of energy flux through radiative processes, to enable acceptable divertor loads. This can be obtained by line radiation from impurities, injected from the plasma edge. There are h ...

IOP Publishing Ltd2023

Columnlike free-interface flows: symmetry breaking and linear instability

Shahab Eghbali

This thesis is dedicated to the analysis of a subclass of interfacial flows, columnlike free-interface flows, from two view angles: (i) the symmetry breaking under geometry-induced or external forces, (ii) their stability against infinitesimal disturbances ...

EPFL2023

Renewable Energy Integration and Waste Heat Recovery for the Production of Sustainable Jet Fuel and Decarbonization of Industrial Heating Applications

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

The process synthesis and optimization methods used in this work include simulation of biomass gasification, hydrogen and synthetic natural gas production, and jet fuel production via a Fisher Tropsch unit. An energy integration approach, carried out by th ...

American Institute of Chemical Engineering2023

JET D-T scenario with optimized non-thermal fusion

Javier García Hernández, Mikhail Maslov, Haomin Sun, Michele Marin

In JET deuterium-tritium (D-T) plasmas, the fusion power is produced through thermonuclear reactions and reactions between thermal ions and fast particles generated by neutral beam injection (NBI) heating or accelerated by electromagnetic wave heating in t ...

IOP Publishing Ltd2023

Ion temperature spectroscopic measurements in high rotation discharges by means of X-ray diagnostic at JET

Henri Weisen

Measurement of the X-ray spectra of the He-like Ni ions (Ni26+) and their dielectronic satellites (Ni25+, Ni24+, and Ni23+) plays a crucial role in determination of electronic and ion temperature of plasma in the JET device. Because n >= 3 satellites of Ni ...

2022

Plunging Circular Jets: Experimental Characterization of Dynamic Pressures Near the Stagnation Zone

Giovanni De Cesare, Pedro Filipe De Almeida Manso, Gregoire Aurelien Marie Jamet

Spillways are a requirement for dams’ safety, mainly preventing overtopping during floods. A common spillway solution involves plunging jets, which dissipate a considerable flow energy in the plunge pool. Energy dissipation has to occur in a controlled man ...

2022

Locomotion of Sensor‐Integrated Soft Robotic Devices Inside Sub‐Millimeter Arteries with Impaired Flow Conditions

Diego Ghezzi, Mahmut Selman Sakar, Amit Yedidia Dolev, Lucio Feo Pancaldi-Giubbini, Adele Fanelli, Lorenzo Francesco John Noseda

One of the grand challenges in interventional cardiology and neuroradiology is to minimize the operation time and risk of damage during catheterization. These two factors drastically increase if the target location resides in small and tortuous vessels. Fl ...

Wiley2022

Real-time model calibration with deep reinforcement learning

Olga Fink

The real-time, and accurate inference of model parameters is of great importance in many scientific and engineering disciplines that use computational models (such as a digital twin) for the analysis and prediction of complex physical processes. However, f ...

2022

Flexural-tensegrity snapping tails for bio-inspired propulsion in fluids

Pedro Miguel Nunes Pereira de Almeida Reis

Many aquatic animals propel themselves by flapping their tails. Leveraging a recently proposed snapping cantilever beam based on the concept of flexural tensegrity, we propose a bio-inspired propulsion device. The design comprises a segmental beam with hol ...

ELSEVIER2022

System and method for a microfluidic jet generation from a compact device

Christophe Moser, Jan Krizek

The invention discloses systems and methods for generation of microfluidic jets providing a tool for very precise and localized delivery of e.g., medicaments. The proposed solution overcomes shortcomings related to miniaturization of a jet injection techno ...

2021