Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Glass fiber

Related publications (32)

Two-dimensional quasi-static delamination in composite laminates under Mode-I and Mode-II conditions

Congzhe Wang

Fiber-polymer composites consist of a polymer matrix and reinforcing fibers made of various materials. These composites exhibit exceptional properties, such as a high strength-to-weight ratio and excellent corrosion resistance, which has led to their incre ...

EPFL2024

Real-time Personalized Monitoring of Neurological Disorders on Wearable Systems

Renato Zanetti

The terminology of neurological disorders encompasses a range of serious illnesses (e.g., epilepsy, Alzheimer's disease) leading to morbidity, disability, and stigma. Epilepsy alone affects over 50 million people worldwide, and these figures are rising as ...

EPFL2023

CRACK SHIELDING MECHANISMS OF INTERLAYERED EPOXY MATERIALS UNDER QUASI-STATIC AND FATIGUE LOADING

Anastasios Vassilopoulos, Dharun Vadugappatty Srinivasan

This research explores the capability of PEI and PVDF thermoplastic interlayers to arrest cracks in epoxy materials modified with short-glass fibers and core-shell rubber particles. It also investigates the effect of interlayer position, the number of inte ...

Queen's University Belfast2023

Supramolecular Modifications of Semicrystalline Polymers

Michael Alan Giffin

Supramolecular interactions play an important role in defining the structure and the resulting mechanical properties of materials. For instance, interchain hydrogen-bonding in PAs gives them superior strength and stiffness in engineering materials, while t ...

EPFL2023

Process development of pre-impregnated hybrid thin-ply composites

Alexios Argyropoulos

Thin-ply composites, obtained with recently developed fiber spreading techniques, rapidly gained industrial interest because they offer a large composite design freedom, and lead to a composite tensile strength that is close to that of the individual fiber ...

EPFL2023

Influence of Fiber Orientation on the Elastic Limit Tensile Stress of UHPFRC

Eugen Brühwiler, Emmanuel Denarié, Jian Zhan

The elastic limit tensile stress of UHPFRC is governed by contributions of the cementitious matrix and the fibrous skeleton. This paper finds that fiber orientation has significant influence on the matrix tensile strength of UHPFRC, while this is not consi ...

2023

Multi-scale characterization and modeling of notched strength and translaminar fracture in hybrid thin-ply composites based on different carbon fiber grades

Guillaume Clément Broggi

Owing to their high specific stiffness and strength, Carbon Fiber Reinforced Composites (CFRP) are ideal candidates for the development of lightweight high-performance structures. Within this family, thin-ply composites allow for wider design freedom and p ...

EPFL2023

Fatigue behavior and life prediction of wind turbine blade composite materials

Anastasios Vassilopoulos

Fatigue life prediction of wind turbine rotor blades is a very challenging task, as their failure is led by different failure types that act synergistically. Inherent defects like wrinkles, fiber misalignments, and voids that can be introduced during fabri ...

Woodhead Publishing (Elsevier)2023

ETFE and its Role in the Fabrication of Lightweight c-Si Solar Modules

Christophe Ballif, Fabiana Lisco

Glass-free, lightweight, photovoltaic modules have the potential to enable new uses of solar in building integrated and vehicle integrated applications. Glass-free modules have the advantages of reduced weight, lower-cost mounting solutions, and reduced tr ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

A life cycle analysis of novel lightweight composite processes: Reducing the environmental footprint of automotive structures

Véronique Michaud, Baris Çaglar, Vincent Werlen, Colin Gomez

In this study, three novel thermoplastic impregnation processes were analyzed towards automotive applications. The first process is thermoplastic compression resin transfer molding in which a glass fiber mat is impregnated in through thickness by a thermop ...

ELSEVIER SCI LTD2022

Characterization of the Radiation Resistance of Glass Fiber Reinforced Plastics for Superconducting Magnets

Cinta Lucia Marraco Borderas

The overall performance of accelerator magnets strongly relies on electrical and mechanical robustness of their components. With an increase of the energy, future particle accelerators will have to withstand integral doses of ionizing radiation of up to se ...

IEEE Institute of Electrical and Electronics Engineers2022

Thermally Drawn CNT-Based Hybrid Nanocomposite Fiber for Electrochemical Sensing

Fabien Sorin, Inès Richard

Nowadays, bioelectronic devices are evolving from rigid to flexible materials and substrates, among which thermally-drawn-fiber-based bioelectronics represent promising technologies thanks to their inherent flexibility and seamless integration of multi-fun ...

MDPI2022

Fire performance evaluation of GFRP-balsa sandwich bridge decks

Niloufar Vahedi

Bridges are a critical component of national infrastructures and economies. A significant percentage of bridges built all around the world are made of reinforced concrete which according to building codes have a life span between 80-100 years. However, str ...

EPFL2022

A Novel Method to Quantify Self-Healing Capabilities of Fiber-Reinforced Polymers

Véronique Michaud, Amaël Maximilien Cohades, Robin Samuel Trigueira, Cecilia Scazzoli

The present work investigates a novel and practical method to evaluate the healing efficiency of carbon-reinforced polymer composites. The method should be representative of damage occurring during the lifetime of a composite part, should tend to damage th ...

FRONTIERS MEDIA SA2022

The role of Encapsulants in the long-term performance of advanced Crystalline Silicon Glass-Glass PV modules

Luca Gnocchi

The adoption of crystalline silicon (c-Si) PV modules based on glass-glass (G-G) structures is gaining momentum because of the possibility to manufacture bifacial panels, collecting light from the rear side. Despite not being an optimal material, Ethylene ...

EPFL2022

Ultimate Feature Sizes in Thermally Drawn Fibers: from Fundamental Analysis to Novel Functional Fibers

Inès Richard

The fiber thermal drawing process has emerged as a simple and scalable technique for the fabrication of multifunctional and flexible electronics. The integration of materials with various physical and functional properties in well-defined architectures ope ...

EPFL2021

Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise

Véronique Michaud, Baris Çaglar, Amaël Maximilien Cohades, Damiano Salvatori

The out-of-plane permeability of two glass fibre fabrics was measured by 26 institutions using silicone oil as a test fluid. Participants in this study were free to select the test procedure, specimen dimensions and data analysis method, provided that test ...

2021

Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing

Véronique Michaud

Nowadays the use of natural fiber composites has gained significant interest due to their low density, high availability, and low cost. The present study explores the development of sustainable 3D printing filaments based on rice husk (RH), an agricultural ...

2021

Fiber-Shaped Electronic Devices

Mohammad Khaja Nazeeruddin

Textile electronics embedded in clothing represent an exciting new frontier for modern healthcare and communication systems. Fundamental to the development of these textile electronics is the development of the fibers forming the cloths into electronic dev ...

WILEY-V C H VERLAG GMBH2021

Review of hybrid composites fatigue

Anastasios Vassilopoulos, Dharun Vadugappatty Srinivasan

Hybrid composites become popular and are today used in a large number of contemporary structural applications. When compared to non-hybrid composites, hybridization offers additional benefits since the mixing of cheaper, low-quality fibers, with more expen ...

2021