Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Sheet metal

Related publications (29)

A semantic model-based systems engineering approach for assessing the operational performance of metal forming process

Dimitrios Kyritsis, Jinzhi Lu

Metal Forming is a basic and essential industrial process to provide materials for constructing complex products. To design an efficient metal forming process, the functional requirements and operational performance are two important aspects to be consider ...

Pergamon-Elsevier Science Ltd2024

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Diego Hernández Fraile

Reinforced concrete flat slabs consist of a continuous, thin concrete plate that rests on a grid of columns. The supporting surface of the columns is very small compared to the floor plan dimensions, leading to concentrations of shear forces near the colum ...

EPFL2024

Semipinacol Rearrangement of Cyclopropenylcarbinols for the Synthesis of Highly Substituted Cyclopropanes

Jérôme Waser, Vladyslav Smyrnov

An electrophile-induced semipinacol rearrangement of cyclopropenylcarbinols is reported. This transformation gives access to various polyfunctionalized cyclopropanes under mild metal-free conditions. The scope of the reaction includes iodine, sulfur and se ...

2023

Improved Waste Heat Management and Energy Integration in an Aluminum Annealing Continuous Furnace Using a Machine Learning Approach

François Maréchal, Daniel Alexander Florez Orrego, Mohammad Andayesh

Annealing furnaces are critical for achieving the desired material properties in the production of high-quality aluminum products. In addition, energy efficiency has become more and more important in industrial processes due to increasing decarbonization r ...

2023

Experiments and proposed model for residual stresses in hot-rolled wide flange shapes

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Andronikos Skiadopoulos

This paper proposes a new residual stress model for hot-rolled wide flange steel cross sections. For this purpose, a dataset of 85 residual stress measurements is first assembled. The dataset is comprised of prior measurements available in the literature t ...

2023

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Di Cui

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023

A new perspective on the punching resistance of edge columns with and without shear reinforcement applying refined measurement techniques

Aurelio Muttoni, Diego Hernández Fraile

Despite edge columns being instrumental components of flat slabs, most punching research has focused on internal connections. Several particularities of edge columns, such as load eccentricity and moment transfer, require additional experimental investigat ...

Fédération Internationale du Béton (fib)2022

Punching of edge columns with and without shear reinforcement: an experimental investigation

Aurelio Muttoni, Diego Hernández Fraile, Andri Setiawan, Júlia Borges Dos Santos

Most research efforts in the past related to the punching resistance of reinforced concrete slabs have concentrated on the response of internal slab-column connections, where significant advances in the state-of-the-art have been performed. Other than inte ...

Fédération Internationale du Béton (fib)2022

Nanobridge Stencil Enabling High Resolution Arbitrarily Shaped Metallic Thin Films on Various Substrates

Jürgen Brugger, Giovanni Boero, Yi-Chiang Sun

Stencil lithography (SL), which uses a perforated membrane as a reusable shadow mask to locally add material patterns on substrates provides a simple but versatile approach for the fabrication of functional devices on a large variety of substrate materials ...

Wiley2022

A mechanical approach for the maximum punching resistance of shear-reinforced slab-column connections

Aurelio Muttoni, Miguel Fernández Ruiz, João Tiago Ramos Bernardo de Santa Rita Simões, Diego Hernández Fraile

The use of punching shear reinforcement is currently considered as one of the most convenient practices to enhance the punching shear strength and deformation capacity of slab-column connections in flat slabs. Intensive research has been performed in the l ...

Fédération Internationale du Béton (fib)2021

Experimental Assessment of a 3D-Printed Stainless Steel Gas Foil Bearing

Jürg Alexander Schiffmann, Karim Magdi Zakaria Abdelrahman Shalash

Gas foil bearings (GFBs) are a key enabling technology for high-speed turbomachinery. The manufacturing of GFBs relies mainly on sheet metal forming techniques in order to conceive the compliant structure (e.g., bump foil) and the top foil. Such techniques ...

2020

In situ characterization of work hardening and springback in grade 2 alpha-titanium under tensile load

Helena Van Swygenhoven

Plastic effects during sheet metal forming can lead to undesirable distortions in formed components. Here, the three-stage work hardening and plastic strain recovery ("springback") in a cold-rolled, alpha-phase commercially pure titanium is examined. Inter ...

2019

Dependency of punching shear resistance and membrane action on boundary conditions of reinforced concrete continuous slabs

Aurelio Muttoni

The design of reinforced concrete flat slabs can be governed at failure by punching shear close to concentrated loads or columns. Geometrical features, reinforcement layouts and in-plane forces provided by external vertical elements, such as shear walls, c ...

CRC PRESS-TAYLOR & FRANCIS GROUP2019

Enhancing Punching Strength and Deformation Capacity of Flat Slabs

Aurelio Muttoni, Miguel Fernández Ruiz, Raffaele Cantone

Punching reinforcement systems have significantly developed in recent years as they allow enhancing the punching resistance of slab-column connections as well as their deformation capacity. These systems, with varying geometry and layout, normally consist ...

2019

Dynamic wetting in pressure-infiltration of ceramic particle preforms by molten metal

Gionata Schneider

This thesis investigates the interaction between mechanically induced flow of a liquid metal into a porous solid, and kinetic effects at the triple line. The approach is experimental and focuses on metal-ceramic systems for which the literature gives value ...

EPFL2019

Buckling of geometrically confined shells

Matteo Pezzulla

We study the periodic buckling patterns that emerge when elastic shells are subjected to geometric confinement. Residual swelling provides access to range of shapes (saddles, rolled sheets, cylinders, and spherical sections) which vary in their extrinsic a ...

ROYAL SOC CHEMISTRY2019

Sensitivity of Simulated Steel Column Instabilities to Plasticity Model Assumptions

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Alexander Riley Hartloper

Current experimental studies on the seismic behavior of steel wide-flange columns under multi-axis cyclic loading reveal that these members, depending on their geometric characteristics, may be susceptible to axial shortening, out-of-plane deformations and ...

2019

Recent improvements of the Critical Shear Crack Theory for punching shear design and its simplification for code provisions

Aurelio Muttoni, Miguel Fernández Ruiz, João Tiago Ramos Bernardo de Santa Rita Simões

In 1960, Kinnunen and Nylander presented a mechanical approach for calculating the punching resistance of slab-column connections. That approach accounted for the response of a slab sector and considered failure to occur on the basis of the strains develop ...

2018

Parametric analysis on punching shear resistance of reinforced concrete continuous slabs

Aurelio Muttoni

Punching shear resistance formulations provided by codes are usually calibrated on test results of isolated specimens that typically simulate the slab zone within the points of contraflexure around the column (hogging area). However, the behaviour of actua ...

2018

Shell Modelling Strategies for the Assessment of Punching Shear Resistance of Continuous Slabs

Aurelio Muttoni, Raffaele Cantone

The punching shear resistance formulation provided by Model Code 2010 is calibrated on the basis of experimental tests on isolated slabs supported on columns. According to Level of Approximation approach, several quantities are required for the design punc ...

SPRINGER INTERNATIONAL PUBLISHING AG2018