Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Iridium

Related publications (28)

Disorder and Halide Distributions in Cesium Lead Halide Nanocrystals as Seen by Colloidal 133Cs Nuclear Magnetic Resonance Spectroscopy

Laura Piveteau

Colloidal nuclear magnetic resonance (cNMR) spectroscopy on inorganic cesium lead halide nanocrystals (CsPbX3 NCs) is found to serve for noninvasive characterization and quantification of disorder within these structurally soft and labile particles. In par ...

Amer Chemical Soc2024

Characterisation and hydration kinetics of beta-C2S synthesised with K2SO4 as dopant

Karen Scrivener, Franco Alberto Zunino Sommariva

In this study, a protocol for synthesising beta-C2S using K2SO4 as a dopant has been reported. Quantitative X-Ray diffraction was used to characterise synthesised samples. It was observed that it is possible to synthesise beta-C2S with high purity (>96 wt% ...

Pergamon-Elsevier Science Ltd2023

The acid-mediated isomerization of iridium(iii) complexes with cyclometalated NHC ligands: kinetic vs. thermodynamic control

Kay Severin, Farzaneh Fadaei Tirani, Anastasia Gitlina

The isomerization of iridium(III) complexes with metalated N-heterocyclic carbene (NHC) ligands was studied. The fac isomers of complexes with 1-phenyl-3-methylbenzimidazolin-2-ylidene or 1-phenyl-3-benzylbenzimidazolin-2-ylidene ligands are transformed cl ...

2023

Separable Brønsted acidic imidazolium salts for polysaccharide hydrolysis in water

Kedar Ashok Abhyankar

The current reliance on limited petrochemical resources and the resulting ecological outcomes have made the exploration of alternative chemical and energy feedstocks invaluable. As such, the development of sustainable processes with a less harmful total en ...

EPFL2023

Charge ordering in Ir dimers in the ground state of Ba5AlIr2O11

Oleg Yazyev, Thorsten Schmitt, Vamshi Mohan Katukuri

It has been well established experimentally that the interplay of electronic correlations and spin-orbit interactions in Ir4+ and Ir5+ oxides results in insulating J(eff) = 1/2 and J(eff) = 0 ground states, respectively. However, in compounds where the str ...

AMER PHYSICAL SOC2022

Automated approach for the evaluation of glutathione-S-transferase P1-1 inhibition by organometallic anticancer compounds

Paul Joseph Dyson

A novel automated method based on sequential injection analysis (SIA), a non-segmented flow injection technique, was developed to evaluate glutathione S-transferase P1-1 (GST P1-1) activity in the presence of organometallic complexes with putative anticanc ...

TAYLOR & FRANCIS LTD2022

Chiral Diimine Complexes of Earth-Abundant Transition Metals for Asymmetric Catalysis

Elena Braconi

The application of Earth-abundant metals in asymmetric catalysis is key to transition towards a more sustainable chemistry. In particular, expanding the library of redox-active ligands capable of supporting Earth-abundant metals is essential in order to re ...

EPFL2022

Strengthening mechanisms in dilute and random solid solution high-entropy BCC alloys

Alireza Ghafarollahi

Tuning the mechanical properties of metals, including strength, through adjusting the type and/or concentration of added solute elements, has been recognized as an effective way to design and produce materials with desired or optimized mechanical propertie ...

EPFL2022

Adaptation and Optimization of an Intraneural Electrode to Interface with the Cervical Vagus Nerve

Silvestro Micera, Ivo Strauss

The modulation of the cervical vagus nerve (VN) using neural electrodes has shown great potential to treat cardiovascular, inflammatory, intestinal, or respiratory dysfunctions. Intraneural electrodes have shown great potentials for other neuroprosthetic a ...

IEEE2021

Phase transformation induced distortions in red gold alloys

Margaux Nathalie Dominique Larcher

Red gold alloys owe their warm and attractive colour to the combination of gold and copper atoms. Thanks to their good mechanical properties and resistance to corrosion, red gold alloys are used in luxury industries as well as in dentistry. Around the equi ...

EPFL2021

Catalytic Enantioselective Functionalizations of C-H Bonds by Chiral Iridium Complexes

Nicolai Cramer, Jin Fay Tan, Lukasz Piotr Wozniak, Adrien Jules Louis Madron Du Vigné, Qui-Hien Nguyen, Vitalii Smal

The development of catalytic enantioselective transformations, enabling the construction of complex molecular scaffolds from simple precursors, has been a long-standing challenge in organic synthesis. Recent achievements in transition-metal catalyzed enant ...

2020

Radial Spin Texture of the Weyl Fermions in Chiral Tellurium

Majed Chergui, Henrik Moodysson Rønnow, Marco Grioni, Oleg Yazyev, Alberto Crepaldi, Luca Moreschini, Mauro Fanciulli, Simon Karl Moser, Michele Puppin, Philippe Bugnon, Edoardo Martino, Gianmarco Gatti, Luc Testa, Daniel Gosalbez Martinez, Silvan Dino Marcos Roth, Serhii Polishchuk

Trigonal tellurium, a small-gap semiconductor with pronounced magneto-electric and magneto-optical responses, is among the simplest realizations of a chiral crystal. We have studied by spin- and angle-resolved photoelectron spectroscopy its unconventional ...

AMER PHYSICAL SOC2020

Electrochemical performance of polymer-derived SiOC and SiTiOC ceramic electrodes for artificial cardiac pacemaker applications

Jürgen Brugger, Fatemeh Navaee, Jongmoon Jang, Lorenz Hagelüken

In an implantable electrode, such as a pacemaker electrode, fibrotic tissue formation due to a foreign body reaction is an important challenge affecting the efficiency to transmit the electrical signal of the device. The chemical inertness, biocompatibilit ...

2020

Comparison of the impact of ozone, chlorine dioxide, ferrate and permanganate pre-oxidation on organic disinfection byproduct formation during post-chlorination

Urs von Gunten

Pre-oxidation is commonly used to mitigate the formation of byproducts during post-disinfection. A comparative study of the impact of four pre-oxidants, ozone (O-3), chlorine dioxide (ClO2), permanganate (Mn(vii)) and ferrate (Fe(vi)), on the formation of ...

ROYAL SOC CHEMISTRY2020

Post-irradiation examination of refractory metal candidates for antiproton targets at the European Laboratory for Particle Physics (CERN)

Elvis Fornasiere

The AD-target (Antiproton Decelerator Target) is the main antiparticle production element of the CERNâ s (European Organization for Nuclear Research) AD (Antiproton Decelerator) complex. Antiprotons are produced by colliding a pulsed 1.5 * 10^13 ppp (prot ...

EPFL2020

Solute/screw dislocation interaction energy parameter for strengthening in bcc dilute to high entropy alloys

William Curtin, Francesco Maresca, Alireza Ghafarollahi

Strengthening, i.e. increased stress required to move a dislocation, in dilute or complex alloys arises from the totality of the interaction energies between the solutes and an individual dislocation. Prevailing theories for strengthening in bcc alloys con ...

IOP PUBLISHING LTD2019

Predicting the reflectivity and colour of metals from first principles

Gianluca Prandini

Gold and copper are the only two elemental metals that show a characteristic colour, due to the presence of a drop in the reflectivity curve inside the visible range. Reflectivities of all other metals are in general high and flat for all visible frequenci ...

EPFL2019

Rh-I, Ir-III ,and Co-III Complexes with Atropchiral Biaryl Cyclopentadienyl Ligands: Syntheses, Structures, and Catalytic Activities

Nicolai Cramer, Coralie Danielle Annick Duchemin, Gints Smits

Chiral cyclopentadienyl (Cp-x) group 9 metal complexes have become versatile catalysts for a variety of efficient enantioselective C-H functionalizations. Atropchiral binaphthyl-derived Cp-x ligands having tuning options at the 3,3'-positions present a rob ...

2019

Appearance of polished 18 karat gold surfaces: linking aesthetics to surface features

Leili Batooli

Impeccable appearance of surfaces is a key constraint in high-end jewelry and watch manufacturing. Based on long tradition in the industry, appearance of products is assessed by trained individuals through visual inspection in designated intervals on the p ...

EPFL2019

Designing high ductility in magnesium alloys

William Curtin, Binglun Yin, Rasool Ahmad

The thermally activated pyramidal-to-basal (PB) transition of (c + a) dislocations, transforming glissile pyramidal dissociated core structures into sessile basal dissociated ones, lies at the origin of low ductility in pure magnesium (Mg). Solute-accelera ...

PERGAMON-ELSEVIER SCIENCE LTD2019