Sébastien VaucherTeaching & PhD Past EPFL PhD Students as codirector Thomas Alexandre, Kwanghoon Choi Courses Materials selection MSE-474 Propose suitable materials, design, and production routes depending on different performance criteria using a computer based software approach. The course is based on Prof. Mike Ashby's well known "Ashby plots" comparing different material properties (mechanical, thermal, chemical, etc.).
Harald BruneOriginaire de Münich en Allemagne, né en 1961, Harald Brune obtient son diplôme en physique de l'Université Ludwig Maximilians en 1989. Après une thèse en chimie physique à l'Institut Fritz-Haber de la Société Max-Planck à Berlin il obtient son titre de docteur ès sciences en 1992. Dès cela, il rejoint le groupe du Prof. K. Kern à l'Institut de physique expérimentale à l'EPFL. En 1995 il est chercheur invité à Copenhague travaillant en modélisation chez le Prof. J. Nørskov. De retour à l'EPFL, il se voit décerné le prix Latsis EPFL 1996 pour ses études par microscopie à effet tunnel de processus atomiques déterminants la croissance cristalline de couches minces. En 1998 il obtient son habilitation (venia legendi) en Physique et est nommé Maître d'enseignement et de recherche (MER) en nanophysique à l'EPFL. La même année il recoit une offre de Professeur Ordinaire (C4) de l'Université Philipps de Marburg. Début 1999 il réfuse cette offre et accepte un poste de Professeur Extraordinaire à l'EPFL et s'installe au sein de l'Institut de la Physique des Nanostructures. Il est nommé Professeur Ordinaire en 2005. Sa recherche porte sur les propriétés physiques (en particulier le magnétisme et la structure électronique) de nouvelles formes de la matière condensée comme des nanostructures et des couches ultra-minces. Il s'intéresse également à la catalyse hétérogène sur des systèmes inspirés dans leur composition et taille par celle des sites actives dans les enzymes en biologie. Il enseigne la Physique Générale pour ingénieurs, la Physique des matériaux solides pour physiciens, les méthodes expérimentales pour physiciens, ainsi que la Physique des surfaces, interfaces et nanostrcutures à l'école doctorale.
Julie Nathalie S GheysenProfessionals experiences PhD student 2018–2022 Université Catholique de Louvain
Teaching & PhD Courses Materials MSE-171 Introduction course of material science applied to usual building materials, especially concrete and metals. Description of their fabrication, mechanical and thermal properties and use in construction. Mechanical behaviour of materials MSE-234 This course provides an introduction to the mechanical behaviour, the processing, the structure and life-cycle o
Valerio PiazzaTeaching & PhD PhD Students Claire Valentine Blaga, Matilde Cantele, Julia Sarah Marhic Past EPFL PhD Students as codirector Michele Zendrini Courses Functional properties of materials MSE-210 The main objective of this course is to present the concepts allowing the understanding of the fundamental principles that enable to predict the properties of the materials. The goal is that with these concepts, one will be able to realize material design and/or to understand novel materials.
Eva Klok-LermannTeaching & PhD Courses Physical chemistry of polymeric materials MSE-431 The student has a basic understanding of the physical and physicochemical principles which result from the chainlike structure of synthetic macromolecules. The student can predict major characteristics of a polymer from its chemical structure and molecular architecture.
Pierre-Etienne BourbanBackground 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
Daniel GörlTeaching & PhD Courses Organic chemistry MSE-211 This course provides a basic foundation in organicchemistry and polymer chemistry, including chemical nomenclature of organic compounds and polymers, an understanding of chemical structures, chemical reaction mechanisms, as well as methods of organic and polymer synthesis. Polymer science MSE-362 Polymer science + TP MSE-360 Introduction to polymer physics and the link between chemical structure and macroscopic
Nicolas RichartI graduated as an engineer in computer science in 2005 at the Ecole National Superieur en Electronique Informatique et Radiocomunication de Bordeaux (ENSEIRB). My degree is colored by an option od High Performance Computing (HPC). Then I made my thesis at LaBRI/INRIA Bordeaux in the ScalApplix/HiePACS team, on the in-situ steering of coupled parallel numerical simulations. I graduated as a Ph D. of computer science of the Universite de Bordeaux 1 in 2010. Since then I am working at EPFL in the Laboratoire de Simulations en Mechanique des Solides (LSMS) as a scientific collaborator.
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Sandrine GerberSandrine Gerber studied chemistry at the "Ecole Nationale Supérieure de Chimie de Paris" in France, where she obtained a diploma of chemical engineer in 1993. The same year she obtained a DEA (Master degree) of organic chemistry at the University Pierre et Marie Curie (Paris VI, France). From 1993 to 1996 she did a PhD in organic chemistry under the supervision of Prof. Jean-Pierre Genêt at the Ecole Nationale Supérieure de Chimie de Paris. In 1996, she moved to University of Lausanne for a post-doctoral stay under the supervision of Prof. Pierre Vogel. In 1998, she was appointed Maître-Assistante at the Institute of Organic Chemistry in the University of Lausanne. In 2003, she obtained the habilitation to direct research from the University Pierre et Marie Curie (Paris VI, France). The same year, she was appointed scientific adjunct at the EPFL and senior scientist (Maître d'Enseignement et de Recherche) in 2006. In December 2014, she was promoted to titular professor. Since September 2007, Sandrine Gerber is deputy to the director of the Institute of Chemical Sciences and Engineering (ISIC). She is also member of the Board of Directors of the Swiss Chemical Society. Since 2007, Sandrine Gerber is part-time lecturer at the university of Fribourg. She was awarded the Prize Eugene Schueller in 1997, the Prize Dufour for prospective organic chemistry in 2005 and the Werner Prize 2010. She also received a special mention in recognition of exceptional quality of pedagogic competencies in the teaching of basic sciences, given by the Direction of the School of Biology and Medicine from the University of Lausanne, in 2013. In October 2018, she will receive the Prize for Excellence in Teaching from the section of Chemistry and Chemical Engineering.
Christophe BallifChristophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.
Harm-Anton KlokExpertise
Polymer design at nanoscaleBiologically-inspired polymers
Mission
Research at the Laboratory of Polymer (LP) focuses on the development of novel advanced polymeric materials with potential applications in optics, electronics or medicine. The philosophy is that precise control over nanoscale structure is an important prerequisite to tailor polymer properties. To this end, a “bottom-up” approach is followed, which starts with designing a new material at the molecular level, in order to be able to pr
Dominique PiolettiDominique Pioletti received his Master in Physics from the Swiss Federal Institute of Technology Lausanne (EPFL) in 1992. He pursued his education in the same Institution and obtained his PhD in biomechanics in 1997. He developed original constitutive laws taking into account viscoelasticity in large deformations. Then he spent two years at UCSD as post-doc fellow acquiring know-how in cell and molecular biology. He was interested in particular to gene expression of bone cells in contact to orthopedic implant. In April 2006, Dominique Pioletti was appointed Assistant Professor tenure-track at the EPFL and is director of the Laboratory of Biomechanical Orthopedics. His research topics include biomechanics and tissue engineering of musculo-skeletal tissues; mechano-transduction in bone; development of orthopedic implant as drug delivery system. Since 2013, he has been promoted to the rank of Associate Professor.
Brayden Graham MyersTeaching & PhD Courses General physics : mechanics (English) PHYS-101(en) Students will learn the principles of mechanics to enable a better understanding of physical phenomena, such as the kinematics and dyamics of point masses and solid bodies. Students will acquire the capacity to quantitatively analyze these effects with the appropriate theoretical tools.
Fabio AvinoEducation PhD in Physics | Turbulence at the boundary of toroidal plasmas with open and closed magnetic flux surfaces 2011 – 2015 EPFL Master in Physics | Rifrattometria su Plasmi di Interesse Termonucleare 2008 – 2010 La Sapienza Bachelor in Physics | Fluorescenza X portatile per l'analisi dei beni culturali 2005 – 2008 La Sapienza Professionals experiences Physicist - Senior Fellow 2017–2020 CERNScientist 2016–2017 EPFL
Teaching & PhD P
Arnaud MagrezEducation
PhD., Materials Science, summa cum laude, Université de Nantes, 2002
M.S., Chemistry, Université des Sciences et Technologies de Lille, 1999
Academic positions
Head of the Crystal Growth Facility, EPFL, 2012-present
Research Associate, Laboratoire de Physique de la Matière Complexe, EPFL, 2003-2012
Research Fellow, Peter Grunberg Institute, FZ-Juelich, 2002-2003
Administrative positions at EPFL
Scientific staff member, EPFL Assembly, 2015-present
Scientific staff member, School Council SB, 2014-present
Member of the IPHYS office 2016-present
Member of the ICMP office 2012-2015
Member of the safety committee of ICMP 2010-2015
