Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Sensor fusion

Related publications (30)

VDMNav: Software Architecture for Aerodynamically Constrained Navigation on Small Fixed-Wing Drones

Jan Skaloud, Aman Sharma, Gabriel François Laupré

Navigation of drones is predominantly based on sensor fusion algorithms. Most of these algorithms make use of some form of Bayesian filtering with a majority employing an Extended Kalman Filter (EKF), wherein inertial measurements are fused with a Global N ...

2024

Airborne sensor fusion: Expected accuracy and behavior of a concurrent adjustment

Jan Skaloud, Davide Antonio Cucci, Aurélien Arnaud Brun, Kyriaki Mouzakidou

Tightly-coupled sensor orientation, i.e. the simultaneous processing of temporal (GNSS and raw inertial) and spatial (image and lidar) constraints in a common adjustment, has demonstrated significant improvement in the quality of attitude determination wit ...

2024

Model-based constraints for trajectory determination of quad-copters: Design, calibration & merits for direct orientation

Jan Skaloud, Davide Antonio Cucci, Kenneth Joseph Paul

This paper proposes a novel method to improve georeferencing of airborne laser scanning by improved trajectory estimation using Vehicle Dynamic Model. In Vehicle Dynamic Model (VDM), the relationship between the dynamics of the platform and control inputs ...

2023

Complex Daily Activities, Country-Level Diversity, and Smartphone Sensing: A Study in Denmark, Italy, Mongolia, Paraguay, and UK

Daniel Gatica-Perez, Lakmal Buddika Meegahapola

Smartphones enable understanding human behavior with activity recognition to support peoples daily lives. Prior studies focused on using inertial sensors to detect simple activities (sitting, walking, running, etc.) and were mostly conducted in homogeneous ...

Assoc Computing Machinery2023

Automatic Body Segment and Side Recognition of an Inertial Measurement Unit Sensor during Gait

Kamiar Aminian, Xavier Crevoisier, Robin Martin, Mina Arabbaniasad

Inertial measurement unit (IMU) sensors are widely used for motion analysis in sports and rehabilitation. The attachment of IMU sensors to predefined body segments and sides (left/right) is complex, time-consuming, and error-prone. Methods for solving the ...

MDPI2023

On the benefit of concurrent adjustment of active and passive optical sensors with GNSS & raw inertial data

Jan Skaloud, Davide Antonio Cucci, Kyriaki Mouzakidou

In airborne laser scanning a high-frequency trajectory solution is typically determined from inertial sensors and employed to directly geo-reference the acquired laser points. When low-cost MEMS inertial sensors are used, such as in lightweight unmanned ae ...

2022

Human Head Yaw Estimation based on Two 3-axis Accelerometers

Hervé Lissek, Gilles André Courtois, Vincent Pierre Olivier Grimaldi

The estimation of the orientation of an object, and a human head in particular, can be defined by the Euler angles: the yaw, pitch and roll. The robust and drift-free estimation of those angles is usually achieved with the data from several sensors such as ...

2022

Lidar point-to-point correspondences for rigorous registration of kinematic scanning in dynamic networks

Jan Skaloud, Davide Antonio Cucci, Aurélien Arnaud Brun

With the objective of improving the registration of lidar point clouds produced by kinematic scanning systems, we propose a novel trajectory adjustment procedure that leverages on the automated extraction of selected reliable 3D point–to–point corresponden ...

2022

A Wearable Low-Power Sensing Platform for Environmental and Health Monitoring: The Convergence Project

Mihai Adrian Ionescu

The low-power sensing platform proposed by the Convergence project is foreseen as a wireless, low-power and multifunctional wearable system empowered by energy-efficient technologies. This will allow meeting the strict demands of life-style and healthcare ...

2021

Wearable Sensor-Based Real-Time Gait Detection: A Systematic Review

Auke Ijspeert, Grégoire Courtine, Joachim von Zitzewitz, Miroslav Caban

Gait analysis has traditionally been carried out in a laboratory environment using expensive equipment, but, recently, reliable, affordable, and wearable sensors have enabled integration into clinical applications as well as use during activities of daily ...

2021

Biomechanical Ambulatory Assessment of 3D Knee Angle Using Novel Inertial Sensor-Based Technique

Kamiar Aminian, Lai Kuan Tham

Three-dimensional (3D) knee angle measurement is one of the key measures in human gait analysis. Inertial sensor capable of measuring joint motion under unconstrained conditions is a practical tool for clinical evaluation and rehabilitation. An inertial me ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

A methodology to design measurement systems when multiple model classes are plausible

Ian Smith, Numa Joy Bertola, Sai Ganesh Sarvotham Pai

The management of existing civil infrastructure is challenging due to evolving functional requirements, aging and climate change. Civil infrastructure often has hidden reserve capacity because of conservative approaches used in design and during constructi ...

2021

Aerosol formation and growth rates from chamber experiments using Kalman smoothing

Lubna Dada

Bayesian state estimation in the form of Kalman smoothing was applied to differential mobility analyser train (DMA-train) measurements of aerosol size distribution dynamics. Four experiments were analysed in order to estimate the aerosol size distribution, ...

Copernicus Publications2021

A parametrized Kalman filter for fast track fitting at LHCb

Michel De Cian

We present an alternative implementation of the Kalman filter employed for track fitting within the LHCb experiment. It uses simple parametrizations for the extrapolation of particle trajectories in the field of the LHCb dipole magnet and for the effects o ...

2021

Simulation Tool : Resources Management in High Performance Avionic for ADR Missions

Jean-Paul Richard Kneib, Michaël Yannick Juillard

This paper describes the second iteration in the development of a simulation tool that provides trade-offs of avionic architectures for future Active Debris Removal (ADR) space missions. ...

IEEE2021

A Novel Macro-Micro Approach for Swimming Analysis in Main Swimming Techniques Using IMU Sensors

Kamiar Aminian, Farzin Dadashi, Mahdi Hamidi Rad

Inertial measurement units (IMU) are proven as efficient tools for swimming analysis by overcoming the limits of video-based systems application in aquatic environments. However, coaches still believe in the lack of a reliable and easy-to-use analysis syst ...

FRONTIERS MEDIA SA2021

A Sensor Fusion Approach to the Estimation of Instantaneous Velocity Using Single Wearable Sensor During Sprint

Kamiar Aminian, Farzin Dadashi, Frédéric Meyer, Salil Apte

Power-Force-Velocity profile obtained during a sprint test is crucial for designing personalized training and evaluating injury risks. Estimation of instantaneous velocity is requisite for developing these profiles and the predominant method for this estim ...

2020

Postural transitions detection and characterization in healthy and patient populations using a single waist sensor

Kamiar Aminian, Farzin Dadashi, Benoît Mariani, Arash Atrsaei

Background: Sit-to-stand and stand-to-sit transitions are frequent daily functional tasks indicative of muscle power and balance performance. Monitoring these postural transitions with inertial sensors provides an objective tool to assess mobility in both ...

BioMed Central2020

Hurdle Clearance Detection and Spatiotemporal Analysis in 400 Meters Hurdles Races Using Shoe-Mounted Magnetic and Inertial Sensors

Kamiar Aminian, Mathieu Pascal Falbriard

This research aimed to determine whether: (1) shoe-worn magnetic and inertial sensors can be used to detect hurdle clearance and identify the leading leg in 400-m hurdles, and (2) to provide an analysis of the hurdlers’ spatiotemporal parameters in the int ...

2020

Light microscope with reconfigurable sensor array

Edoardo Charbon, Claudio Bruschini, Ivan Michel Antolovic

A light microscope comprises a light source (10) for illuminating a specimen (35), a sensor array (60) comprised of photon-counting detector elements (61, 62) for measuring detection light (15) coming from the specimen (35), and a control device (70) for c ...

2020