Rüdiger UrbankeRüdiger L. Urbanke obtained his Dipl. Ing. degree from the Vienna University of Technology, Austria in 1990 and the M.Sc. and PhD degrees in Electrical Engineering from Washington University in St. Louis, MO, in 1992 and 1995, respectively. He held a position at the Mathematics of Communications Department at Bell Labs from 1995 till 1999 before becoming a faculty member at the School of Computer & Communication Sciences (I&C) of EPFL. He is a member of the Information Processing Group. He is principally interested in the analysis and design of iterative coding schemes, which allow reliable transmission close to theoretical limits at low complexities. Such schemes are part of most modern communications standards, including wireless transmission, optical communication and hard disk storage. More broadly, his research focuses on the analysis of graphical models and the application of methods from statistical physics to problems in communications. From 2000-2004 he was an Associate Editor of the IEEE Transactions on Information Theory and he is currently on the board of the series "Foundations and Trends in Communications and Information Theory." In 2017 he was President of the Information Theory Society. From 2009 till 2012 he was the head of the I&C doctoral school, in 2013 he served as Dean a. i. of I&C, and since 2016 he is the Associated Dean for teaching of I&C. He is a co-author of the book "Modern Coding Theory" published by Cambridge University Press. Awards: 2021 IEEE Information Theory Society Paper Award 2016 STOC Best Paper Award 2014 La Polysphere Teaching Award 2014 IEEE Hamming Medal 2013 IEEE Information Theory Society Paper Award 2011 MASCO Best Paper Award 2011 IEEE Koji Kobayashi Award 2009 La Polysphere Teaching Award 2002 IEEE Information Theory Society Paper Award Fulbright Scholarship My students have won the following awards: M. Mondelli, 2021 IEEE Information Theory Paper Award M. Mondelli, EPFL Doctorate Award 2018 M. Mondelli, Patrick Denantes Award, 2017 M. Mondelli, IEEE IT Society Student Paper Award at ISIT, 2015 M. Mondelli, Dan David Prize Scholarship, 2015 H. Hassani, Inaugural Thomas Cover Dissertation Award, 2014 S. Kudekar, 2013 & 2021 IEEE Information Theory Paper Award A. Karbasi, Patrick Denantes Award, 2013 V. Venkatesan, Best Paper Award at MASCOTS, 2011 A. Karbasi, Best Student Paper Award at ICASSP, 2011 (with R. Parhizkar) A. Karbasi, Best Student Paper Award at ACM SIGMETRICS, 2010 (with S. Oh) S. Korada, ABB Dissertation Award, 2010 S. Korada, IEEE IT Society Student Paper Award at ISIT, 2009 (with E. Sasoglu) S. Korada, IEEE IT Society Student Paper Award at ISIT, 2008
Jean-Marie FuerbringerJean-Marie Fürbringer graduated with a degree in Physics at EPFL in 1987. Developing his doctoral research on sensitivity analysis of simulation models, he was awarded the doctoral degree by EPFL in 1992.
From 1995 to 1997, Dr Fürbringer was visiting researcher at the NIST in Gaithersburg (Maryland).
In 1997, Dr Fürbringer was appointed visiting professor with the Faculty of Engineering Science at the Catholic University of Lima (PUCP). While at PUCP, he also established and managed the Learning Center of Graña y Montero, which provides training and competency management for the five companies of the group.
In 2001, Dr Fürbringer joined the laboratory of production and processes (LGPP) at EPFL where he led and managed several research projects on competency management and engineering education.
From 2007 to 2010, he was deputy director of the Institute of Mechanical Engineering.
Dr Fürbringer was appointed to the position of deputy dean of the EPFL Doctoral School in 2010 where he has worked till fall 2013.
From November 2013 he has been attached to the Section of Physics as research associate.
Anja SkrivervikAnja Skrivervik obtained her electrical engineering degree from Ecole Polytechnique Fédérale de Lausanne in 1986, and her PhD from the same institution in 1992, for which she received the Latsis award. After a stay at the University of Rennes as an invited Research Fellow and two years in the industry, she returned part time to EPFL as an Assistant Professor in 1996, and is now a Professeur Titulaire at this institution, where she is the head of the Microwave and Antenna Group. Her research activities include electrically small antennas, antennas in biological media, periodic structures, reflect- and tranmitarrays, and numerical techniques for electromagnetics. She is author or co-author of more than 200 peer reviewed scientific publications. Her teaching activities include courses on microwaves and antennas, and she has course at Bachelor, Master and PhD levels. She was director of the EE section form 1996-2000, and is currently the director of the EE doctoral school at EPFL.
She is very active in European collaboration and European projects. She was the chairperson of the Swiss URSI until 2012, is a Board member of the European School on Antennas and is frequently requested to review research programs and centers in Europe. She is a member of the board of directors of the European Association on Antennas and Propagation (EurAAP) since 2017.
Nicolas MacrisNicolas Macris received the PhD degree in theoretical physics from EPFL and then pursued his scientific activity at the mathematics department of Rutgers University (NJ, USA). He then joined the Faculty of Basic Science of EPFL, working in the field of quantum statistical mechanics and mathematical aspects of the quantum Hall effect. Since 2005 he is with the Communication Theories Laboratory and Information Processing group of the School of Communication and Computer Science and currently works at the interface of statistical mechanics, information theory and error correcting codes, inference and learning theory. He held long-term visiting appointments and collaborations with the University College and the Institute of Advanced studies in Dublin, the Ecole Normale Supérieure de Lyon, the Centre de Physique Theorique Luminy Marseille, Paris XI Orsay, the ETH Zürich and more recently Los Alamos National Lab. CV and publication list.
Elisabeth AgoritsasExpertise
=> See my personal homepage for more content https://eagoritsas.wordpress.com.Statistical physics of classical disordered systems, with focus on specific classes of models:disordered elastic interfaces and random manifolds,mesoscopic elasto-plastic models (spatially-resolved and effectively mean-field versions),mean-field description of structurally disordered systems (e.g. glasses) in infinite dimensions,continuous random perceptron model.1D Kardar-Parisi-Zhang equation and its encompassing unive Kamiar AminianKamiar Aminian received the M.S. degree in electrical engineering in 1982, the Ph.D degree in biomedical engineering in 1989 and the Postgraduate degree on technical computing in 1993 from Ecole Polytechnique Fédérale de Lausanne (EPFL). He was assistant professor (1994-1996) with Sharif University of Technology (Tehran). He joint EPFL in 1996 where he is currently Professor of medical instrumentation and the director of the Laboratory of Movement Analysis and Measurement in the Institute of Bioengineering of EPFL. His research interests include methodologies for human movement monitoring and analysis in real world conditions mainly based on wearable technologies and inertial sensors with emphasis on gait, physical activity and sport. His research aims to perform outcome evaluation in orthopaedics, to improve motor function and intervention programs in aging and patients with movement disorders and pain, and to identify metrics of performance in sport science.
Kamiar Aminian is a member of the International Society of Posture and Gait Research, the Institute of Electrical and Electronics Engineers, the European Society of Movement Analysis in Adults and Children, the Prevention of fall Network Europe, the Intentional Society of Biomechanics and the President of the 3D analysis of the human movement group. He is author or co-author of more than 450 scientific papers published in reviewed journals and presented at international conferences and holds 10 patents related to medical devices.
Full CV
ORCID
Karen ScrivenerDe nationalité anglaise, Karen Scrivener est née en 1958. Au cours de sa carrière, ses travaux et sa recherche traitaient des domaines suivants: Identification du développement microstucturale pendant l'hydratation du ciment. Elaboration d'une approche multitechnique pour étudier la microstucture des ciments et bétons, avec accent sur la quantification par analyse des images d'électrons retrodiffusés. Caractérisation de l'auréole de transition de la pâte de ciment autour des granulats. Compréhension des processus de dégardation des bétons, en particulier le gonflement lié à la formation de l'éttringite retardée dans les bétons étuvés.
Simon Nessim HeneinBorn in 1973 and of Egyptian-Swiss nationality, Simon Henein grew up in Cairo. He obtained an engineering degree at the Ecole Polytechnique Fédérale de Lausanne (EPFL) in 1996 and went on to complete his doctorate at the EPFL in 2000. In 2001, he published the book “Conception des guidages flexibles” which has become a reference in precision engineering. He then joined the Centre Suisse d’Electronique et Microtechnique (CSEM), Neuchatel, Switzerland, where he conceived and developed mechanisms for robotic, aerospace, medical and watchmaking applications. He pursued his research career at the Paul Scherrer Institute, Villigen, Switzerland, where he developed instruments for the Swiss Light Source Synchrotron (SLS). Since November 1st, 2012, he is associate professor in microengineering at the EPFL, holder of the Patek Philippe Chair and director of the Micromechanical and horological design laboratory (Instant-Lab).
Yves BellouardDr. Yves Bellouard is Associate Professor in Microengineering at Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland, where he heads the Galatea lab and the Richemont Chair in micromanufacturing. He received a BS in Theoretical Physics and a MS in Applied Physics from Université Pierre et Marie Curie in Paris, France in 1994-1995 and a PhD in Microengineering from Ecole Polytechnique Fédérale de Lausanne (EPFL) in Lausanne, Switzerland in 2000. For his PhD work, he received the Omega Scientific prize (2001) for outstanding contribution in the field of microengineering for his work on Shape Memory Alloys. Before joining EPFL in 2015, he was Associate Professor at Eindhoven University of Technologies (TU/e) in the Netherlands and prior to that, Research Scientist at Rensselaer Polytechnic Institute (RPI) in Troy, New York for about four years where he started working on femtosecond laser processing of glass materials. From 2010 until 2013, Yves Bellouard initiated and coordinated the Femtoprint project, a European research initiative aiming at investigating a table-top printer for microsystems ('3D printing of microsystems'). In 2013, he received a prestigious ERC Starting Grant (Consolidator-2012) from the European Research Council and a JSPS Fellowship from the Japan Society for the Promotion of Science. His current research interests are on new paradigms for system integration at the microscale and in particular laser-based methods to tailor material properties for achieving higher level of integration in microsystems, like for instance integrating optics, mechanics and fluidics in a single monolith. These approaches open new opportunities for direct-write methods of microsystems (3D printing). Personal website
Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Guillaume AnciauxResearchResearch Topics My research can be decomposed in three main blocks:First, the main goal of my current research is the physical description of contact interactions. I performed numerous studies of this topic using different models from the continuum scale down to atomistic scale. Since atomic phenomena and macroscopic observations are linked, the physics of contact needs the simultaneous consideration of several scales. For instance, plasticity is a theory defined for the macroscopic scale whereas t
