Youssef SamlaliTeaching & PhD Courses Urban planning in the South PENS-307 This course is an introduction to the technical and conceptual tools essential to urban planning and evidence-based decision-making. These tools are introduced in the context of cities in the Global South, in order to understand the spatial and social dynamics behind urbanisation.
Baraka Jean-Claude MunyakaEducation Doctorate | Industrial & Systems Engineering 2021 – 2021 University of Pretoria Masters | Insdustrial Engineering 2014 – 2014 Durban University of Technology Professionals experiences Industrial Engineer Consultant 2012–2022 Tsanyela, XIG Minerals, Volticor Enterprises, Durban; Snackworks, Durban; Microfinish Manufacturing, Durban; Nampak Flexible, Durban; Emcor Flexible, CapeTown;Industrial Engineer 2009–2010 Smith’s Plastics Ltd, Durban
Teaching &
Félix SchmidtTeaching & PhD Courses Environmental impact assesment ENG-474 Presentation of the bases of the environmental impact assesment (EIA), context. Assesment methodology and tools for each of the topics and chapters. Illustration with many real cases, and group work. Discussion of the limitations of EIA and new tools such as strategic environmental studies.
Emy AmsteinTeaching & PhD Courses UE H : Graphy AR-433 Experiment graphic tools to represent architecture. Exercise the skill of communicating via these tools, through repeated practice of eye/hand/brain connections; a reflection stemming from the theories of representation; and by searching for inventive solutions.
Richard Edward BaldwinTeaching & PhD Courses Sustainability in the global context MGT-470 This course equips you with the tools needed to evaluate the economic, historical, and political dimensions of climate change from a global perspective. You will also learn about the international institutions and megatrends shaping and constraining the solutions.
Zhanyun WangTeaching & PhD Courses Sustainable chemicals manufacture: concepts/tools CH-480 This course introduces the foundational concepts and tools of Safe and Sustainable by Design (SSbD), a forward-looking framework for the development of future chemicals and materials. It also offers insights into relevant regulatory and industry frameworks at the Swiss, EU, and global levels.
Francesco VarratoExpertise
Simulation and theory of coarse grained models of soft matter. Studies on colloidal gels, polymer melts, supercooled liquids and glassy systems. Research on physical fractals and dynamically arrested amorphous structures.
Expertise
Simulation and theory of coarse grained models of soft matter. Studies on colloidal gels, polymer melts, supercooled liquids and glassy systems. Research on physical fractals and dynamically arrested amorphous structures.
Teaching & PhD Courses Hands-on with Research
Emmanuel LantiTeaching & PhD Courses Parallel programming PHYS-743 Learn the concepts, tools and API's that are needed to debug, test, optimize and parallelize a scientific application on a cluster from an existing code or from scratch. Both OpenMP (shared memory) and MPI (distributed memory) paradigms are presented and experimented.
Emmanuelle Brigitte Marie DavidMission
After six years leading the EPFL Space Center — spanning teaching, student associations, research, and innovation — I have a grounded understanding of what makes EPFL exceptional and where it faces real complexity. I want to bring that perspective into institutional governance.Constructive by nature. I am solution-oriented, genuinely enjoy working across large and diverse stakeholder groups, and know how to navigate the constraints of a complex organization while keeping things moving forward.A brid
Christophe Emmanuel GenoudExpertise
Political Science, Administration, Public Policy, Decision Making, Organization Sociology, Management.
Current Work
Writing a book on Decision Making.
Public manager, Secretary General of a Geneva municipality, Chairman of the Board of Directors, vacant speaker at the Haute Ecole Spécialisée de Suisse Occidentale (HES-SO) in Lausanne, lecturer at the Ecole Polytechnique fédérale de Lausanne (EPFL), organisational specialist, author of a book on management "Leadership, agility, happiness at work: B
Sophie LufkinFORMATION
2010 - Thèse de doctorat au sein de l'EDAR (Ecole doctorale Architecture, Ville, Histoire) sur la densification des friches ferroviaires, co-dirigée par les Prof. Inès Lamunière et Vincent Kaufmann
2005 - "Master of Art" en architecture, sous la direction des Prof. Patrick BERGER et Inès LAMUNIERE
2003 - Année d'échange à l'ETHZ
1999 - Entrée à l'EPFL, section architecture
1998 - Maturité type B, Collège Claparède, Genève
EXPERIENCE PROFESSIONNELLE
2010 - Architecte, Cheffe de projet chez LAR - Fernando Romero, México
2006 - Assistante de recherche à lEPFL au Laboratoire darchitecture et mobilité urbaine (LAMU), projet de recherche PNR54 "Densification des friches ferroviaires"
2005 - Architecte chez Devanthéry & Lamunière, Genève
2004 - Stage darchitecture, Eric Maria, Genève
2003 - Stage darchitecture, Sumi & Burkhalter, Zurich
2001 - Stage darchitecture, Devanthéry & Lamunière, Genève
RECOMPENSES ET BOURSES
2001 - Prix SIA Vaudoise pour le projet "Fondation Ella Maillart à Chandolin"
2005 - Prix de l'Association des diplômes A3-EPFL
2008 - Bourse Erna Hamburger
LANGUES
Français (maternelle), allemand et anglais (courantes), portugais (notions)
Roger HerschRoger D. Hersch is professor of Computer Science and head of the Peripheral Systems Laboratory at EPFL. He received his engineering degree from ETHZ in 1975, worked in industry from 1975 to 1980, and obtained his PhD degree from EPFL in 1985. He directed the widely known
Visible Human Web Server project
, which offers a number of services for the visualization of human anatomy.
His current research focuses on color reproduction, spectral color prediction models, moiré imaging, and visual document security. Recent achievements include the PhotoProtect technology, which incorporates text as chromatic differences in order to protect identity photographs (Swiss driving license), microstructure imaging, which is used by railways companies (SNCF, RENFE) and festival organizers (Paleo) to print tickets at home and the band moire imaging technology for the protection of security documents.
Giovanni De MicheliExpertise
Design technologies for integrated systems on silicon, such as synthesis, hw/sw codesign and low-power design, as well as systems on heterogeneous platforms including electrical and biological components.
Scientific Director of EcoCloud Center at EPFL
Directing activities towards creating sustainable computation including AI.Designing energy-savvy data centers and edge devices.
More information
Please read http://si2.epfl.ch/~demichel/
Giovanni De Micheli is a research scientist in electronics and Mathieu HuruguenTeaching & PhD Courses Algèbre linéaire et géométrie (pour MAN) PREPA-032(a) We present the fundamental notions of linear algebra in the geometric context where they emerged. We will therefore emphasize the dimensions 2 and 3, and insist on the visualisation of classical objects and operations in the plane and in the 3D space. Analysis II (for CMS) PREPA-005(a) This class focus on the studies of special functions : trigonometric, logarithmic and exponential functions. Anal
Leonid MoninTeaching & PhD Courses Algebra III - rings and fields MATH-215 This is an introductory course in ring and field theory. Analysis I (English) MATH-101(en) We study the fundamental concepts of analysis, calculus and the integral of real-valued functions of a real variable. Topology III - Homology MATH-323 Homology is one of the most important tools to study topological spaces and it plays an important role in many fields of mathematics. The aim of this course is
Mirko KovacExpertise
Aerial RoboticsEnvironmental SensingSustainability RoboticsPhysical Artificial Intelligence
Short Biography Prof. Mirko Kovač is Director of the Laboratory of Sustainability Robotics, jointly appointed at the Swiss Federal Laboratories for Materials Science and Technology (Empa) in Zürich and the Swiss Federal Institute of Technology Lausanne (EPFL). He holds an Honorary Professorship at Imperial College London, where he previously served as Full Professor and founded the Aerial Robotics Laborator
Marco MattavelliTeaching & PhD Past EPFL PhD Students Christophe Clerc, Ruohua Zhou, Beilu Shao, Christophe Lucarz, Richard Thavot, Ab Al Hadi Bin Ab Rahman, Endri Bezati, Simone Casale Brunet, Malgorzata Michalska, Ana Angelica Hernandez Lopez, Aurélien Bloch, Mustafa Besirli, Ünsal Öztürk Past EPFL PhD Students as codirector Sylvain Aguirre Courses Systems and architectures for signal processing EE-555 Study of the essential components and implementation technologies of digital signal processing and commu
Viktor KuncakViktor Kunčak joined EPFL in 2007, after receiving a PhD degree from MIT. Since then has been leading the Laboratory for Automated Reasoning and Analysis and supervised at least 12 completed PhD theses. His works on languages, algorithms and systems for verification and automated reasoning. He served as an initiator and one of the coordinators of a European network (COST action) in the area of automated reasoning, verification, and synthesis. In 2012 he received a 5-year single-investigator European Research Council (ERC) grant of 1.5M EUR. His invited talks include those at Lambda Days, Scala Days, NFM, LOPSTR, SYNT, ICALP, CSL, RV, VMCAI, and SMT. A paper on test generation he co-authored received an ACM SIGSOFT distinguished paper award at ICSE. A PLDI paper he co-authored was published in the Communications of the ACM as a Research Highlight article. His Google Scholar profile reports an over-approximate H-index of 38. He was an associate editor of ACM Transactions on Programming Languages and Systems (TOPLAS) and served as a co-chair of conferences on Computer-Aided Verification (CAV), Formal Methods in Computer Aided Design (FMCAD), Workshop on Synthesis (SYNT), and Verification, Model Checking, and Abstract Interpretation (VMCAI). At EPFL he teaches courses on functional and parallel programming, compilers, and verification. He has co-taught the MOOC "Parallel Programming" that was visited by over 100'000 learners and completed by thousands of students from all over the world.
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Dominique PiolettiDominique Pioletti received his Master in Physics from the Swiss Federal Institute of Technology Lausanne (EPFL) in 1992. He pursued his education in the same Institution and obtained his PhD in biomechanics in 1997. He developed original constitutive laws taking into account viscoelasticity in large deformations. Then he spent two years at UCSD as post-doc fellow acquiring know-how in cell and molecular biology. He was interested in particular to gene expression of bone cells in contact to orthopedic implant. In April 2006, Dominique Pioletti was appointed Assistant Professor tenure-track at the EPFL and is director of the Laboratory of Biomechanical Orthopedics. His research topics include biomechanics and tissue engineering of musculo-skeletal tissues; mechano-transduction in bone; development of orthopedic implant as drug delivery system. Since 2013, he has been promoted to the rank of Associate Professor.
