Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Geothermal heating

Related publications (26)

Decomposition method to evaluate district heating/cooling network potential at urban scale

François Maréchal, Luc Girardin, Ana Catarina Gouveia Braz, Bingqian Liu

In this work, a tool to design district heating networks (DHN) is presented and applied to the city of Lausanne as a case study. The evaluation of the buildings’ heat/cooling demand is performed using a Geographic Information System (GIS) database, built f ...

Associazione Italiana Di Ingegneria Chimica2024

Shaped Laser Pulses for Microsecond Time-Resolved Cryo-EM: Outrunning Crystallization during Flash Melting

Marcel Drabbels, Ulrich Lorenz, Constantin Richard Krüger, Nathan Junior Mowry

Water vitrifies if cooled at rates above 3 × 105 K/s. In contrast, when the resulting amorphous ice is flash heated, crystallization occurs even at a more than 10 times higher heating rate, as we have recently shown. This may present an issue for microseco ...

2024

Fluid flow through microcracked and fractured granitic reservoirs

Marie Estelle Solange Violay, Michael Heap, Lucille Jocelyne Nadine Carbillet

The permeability of crustal rocks and rock-masses dictates the efficiency of hydrothermal circulation and therefore the productivity of geothermal resources. In this study, we find by monitoring P-wave velocity that thermal microcracking in Lanhélin granit ...

2023

Single-Well Pore Pressure Preconditioning for Enhanced Geothermal System Stimulation

Marie Estelle Solange Violay, Barnaby Padraig Fryer, Mathias Alexandre David Lebihain

The stress state is an important parameter in terms of both earthquake nucleation and rupture. Here, a new stimulation technique is proposed for Enhanced Geothermal Systems (EGSs), which have previously been burdened with a number of high-profile incidence ...

2023

Propagation of planar three-dimensional buoyant hydraulic fractures

Andreas Möri

Hydraulic fractures are driven by an internal fluid pressure exceeding the minimum compressive stress, propagating in a direction perpendicular to the latter. This class of tensile fractures has gained interest over the last fifty years due to the developm ...

EPFL2023

A fully-coupled highly-parallelized geomechanical simulator for assessing induced seismicity

Jean-François Molinari, Brice Tanguy Alphonse Lecampion, Guillaume Anciaux, Nicolas Richart, Emil Gallyamov

Induced seismicity caused by anthropogenic modification of the subsurface effective stress state has been observed in a number of industrial applications -- from hydrocarbon extraction (e.g., Groningen [1]), drilling waste-water disposal (e.g., [2]) to the ...

2023

Risk of incorrect choices due to uncertainty in BPS evaluations of conceptual-stage neighbourhood-scale building designs

Marilyne Andersen, Luisa Pastore, Minu Agarwal

At the conceptual stage, building performance simulation (BPS) based evaluations are being increasingly used for tasks such as ranking of competing massing design proposals. However, such conceptual stage evaluations suffer from information deficiency in b ...

2023

Three-dimensional hydraulic fracture propagation in homogeneous and heterogeneous media

Carlo Peruzzo

Hydraulic fractures are tensile fractures that occur in solid materials due to the natural intrusion or anthropogenic injection of a viscous fluid into a fracture channel. The deliberate creation of hydraulic fractures is part of an industrial technology h ...

EPFL2023

Perfluorocarbon emulsion enhances MR-ARFI displacement and temperature in vitro: Evaluating the response with MRI, NMR, and hydrophone

Mohamed Farhat, Davide Bernardo Preso

Sonosensitive perfluorocarbon F(8)TAC(18)-PFOB emulsion is under development to enhance heating, increase thermal contrast, and reduce treatment times during focused ultrasound tumor ablation of highly perfused tissue. The emulsion previously showed enhanc ...

FRONTIERS MEDIA SA2023

Selection and Optimal Use of Nanoporous Materials for Adsorption Energy Technologies

Emanuele Piccoli

Due to the large waste of heat in the power and industrial sectors, our use of energy is inefficient. Moreover, it relies on rapidly depleting and greenhouse-gas-emitting sources such as fossil fuels. While the scarcity of energy resources is a relevant so ...

EPFL2023

Impact of Standard versus Tracked-based User Behavior into Energy Simulations of Open-Space Offices

Dolaana Khovalyg, Verena Marie Barthelmes, Arnab Chatterjee

This simulation-based study aimed to contribute to gaining knowledge on how much the deviation between occupant-related input by the national standard and by insitu measurements might impact predictions of heating/cooling needs in offices. Analysis was per ...

2023

Metal Catalysts for the Electrochemical Reduction of CO2

Cedric David Koolen

The world by and large has adopted the The Paris Agreement, which commits any signing party to cut greenhouse emissions drastically and prevent global heating above 2 °C beyond pre-industrial levels. For this ambitious goal to be met, ratifying states need ...

EPFL2023

Three-dimensional fluid-driven frictional ruptures: theory and applications

Alexis Alejandro Sáez Uribe

Fluid-driven frictional ruptures are important in a broad range of subsurface engineering technologies and natural earthquake-related phenomena. Some examples of subsurface operations where borehole fluid injections can induce frictional slip are deep geot ...

EPFL2023

Spatio-Temporal Estimation of Renewable Energy Potential in Built Environments using Big Data

Alina Ursula Rosa Walch

To achieve the goals of the Paris Agreement on climate change, governments around the world must shift to renewable energy (RE) to drastically reduce their CO2 emissions within the next 10-30 years. The development of effective strategies for RE integratio ...

EPFL2022

Analysis of barrette foundations subjected to mechanical and thermal loads

Lyesse Laloui, Alessandro Francesco Rotta Loria

In recent years, there has been increasing interest in the use of rectangular barrette foundations for the structural support and energy supply of tall buildings when circular piles become inefficient or uneconomical. In such applications, so-called energy ...

2022

Sources of Primary Electricity Supply

Michael Lehning, Annelen Kahl

This synthesis report provides an overview of primary electricity supply sources, including power generation potentials and costs as well as the as- sociated environmental burdens of electricity pro- duction in Switzerland. It gives a synthesis of the main ...

ETH Zurich2022

A method

Fabien Sorin, Andreas Leber

A method of manufacturing a fibre comprising a lined channel, using a draw apparatus, the method comprising: providing a preform, comprising a channel extending through the preform, to the draw apparatus; feeding a liner into the channel; heating a portion ...

2022

Thermal-hydraulic analysis of alternative cable-in-conduit conductors for the European DEMO hybrid central solenoid

Kamil Sedlák, Xabier Sarasola Martin, Roberto Guarino, Nikolay Bykovskiy

A hybrid design of the Central Solenoid is under study within the conceptual design phase of the European DEMO fusion reactor. It is based on HTS conductors in the innermost high-field layers, and Nb3Sn and NbTi conductors for field values below 15 T. Sinc ...

2022

Experimental and numerical investigation of the thermo-mechanical behaviour of an energy sheet pile wall

Lyesse Laloui, Alessandro Francesco Rotta Loria

One-of-a-kind experimental and numerical investigation is provided in this paper about energy sheet pile walls: earth retaining structures that embed heat exchanger probes within piles for the exploitation of shallow geothermal energy. The study resorts to ...

2021

Machine learning enhancement of thermal response tests for geothermal potential evaluations at site and regional scales

Lyesse Laloui, Alessandro Francesco Rotta Loria, Benoît Claude Henri Cousin

This study explores and validates a machine learning approach for the practical, effective, and precise prediction of the thermo-physical characteristics that are essential for the analysis and design of shallow geothermal systems, including borehole heat ...

2021