Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Alkali–silica reaction

Related publications (32)

The role of Zn in C-S-H atomic structure, nucleation and growth

Anna Morales Melgares

The most promising solution towards cementitious materials with a lower carbon footprint is the partial substitution of the clinker by supplementary cementitious materials (SCMs) such as fly ash, blast furnace slag, limestone and calcined clays. The produc ...

EPFL2023

Influence of temperature on phase assemblages of belite-ye'elimite cement

Karen Scrivener, Diana Londoño Zuluaga, Natechanok Chitvoranund

This paper studies the effect of temperature on the phase assemblages of belite-ye'elimite cement. A comparison is made between thermodynamic modelling and experimental data at 28 and 180 days of hydration at 5, 20, 40, and 60 degrees C. The fast reaction ...

Pergamon-Elsevier Science Ltd2023

Data-driven optimization tool for the functional, economic, and environmental properties of blended cement concrete using supplementary cementitious materials

Hisham Tarek Mohamed Hafez

The need to produce more sustainable concrete is proving imminent given the rising environmental concerns facing the industry. Blended cement concrete, based on any of the prominent supplementary cementitious materials (SCMs) such as fly ash, ground granul ...

ELSEVIER2023

Going Below 50% Clinker Factor in Limestone Calcined Clay Cements (LC3): A Comparison with Pozzolanic Cements from the South American Market

Karen Scrivener, Franco Alberto Zunino Sommariva

Limestone calcined clays are a promising technology as they offer similar performance to OPC from 7 days onwards, while enabling a reduction of the clinker content of 50%. In some regions of the world like South America, pozzolanic cements (i.e., blended c ...

SPRINGER INTERNATIONAL PUBLISHING AG2023

The effect of paste composition, aggregate mineralogy and temperature on the pore solution composition and the extent of ASR expansion

Karen Scrivener, Mahsa Bagheri

The reaction kinetics of the alkali silica reaction depends on the composition of the pore solution. The evolution of the pore solution composition in different cement pastes and concretes was studied. Pastes containing silica fume or metakaolin had the lo ...

SPRINGER2022

Mechanics of alkali-silica reaction in concrete across scales

Emil Gallyamov

Alkali-silica reaction occurs in concrete between the alkalis contained in the pore solution and silica in the aggregates. Generation of ASR products gives rise to the internal pressures that cause expansion and cracking. Due to its deleterious effect on c ...

EPFL2022

Reactive dicalcium silicate binders: Microstructure and transport properties

Adrian-Alexandru Pîrvan

The calcium silicate hydrates (C-S-H) are without doubt one of the most important hydration products in a hardened cement paste. Giving the complexity of the microstructure that forms by hydration of ordinary Portland cement (OPC) and the more recently use ...

EPFL2022

Effect of alkali, aluminium and equilibration time on calcium-silicate-hydrates

Yu Yan, Yiru Yan

Calcium silicate hydrate (C-S-H) is the main hydration product in Portland and blended cements, and greatly affects durability and mechanical properties of the hydrated cement. In the presence of Al-rich supplementary cementitious materials (SCMs), C-(A-)S ...

EPFL2022

Concrete cancer : characterization of Alkali Silica Reaction early stage products by electron microscopy

Solène Anne-Lise Albinski

Concrete deterioration is a natural process, which has to be carefully monitored over a the service life of a structure. The Alkali-Silica Reaction (ASR) is a slow-process degradation, which devel-ops over decades and is therefore difficult to predict. Sin ...

EPFL2022

Efficient Meso-Scale Modeling of Alkali-Silica-Reaction Damage in Concrete

Ali Falsafi

The alkali-silica reaction (ASR), also known as concrete cancer, is one of the most prevalent causes of concrete degradation. In this chemical reaction, amorphous silica in the aggregates reacts with alkalis in the pore solution. By absorbing water, hydrop ...

EPFL2022

Hydration and durability of fast hardening binders incorporating supplementary cementitious materials

Sarra El Housseini

The use of supplementary cementitious materials (SCMs) is widely considered the most promis-ing approach to reduce CO2 emissions relative to cement production. SCMs are not commonly present in binders used for special applications. On the other hand, due t ...

EPFL2022

Effect of different ions on dissolution rates of silica and feldspars at high pH

Karen Scrivener, Mahsa Bagheri

The dissolution kinetics of silica-containing minerals in aggregates influences strongly the process of ASR in concrete. In this paper, the effect of different ions on the dissolution rates of SiO2 (amorphous and quartz) and feldspars at high pH values was ...

Pergamon-Elsevier Science Ltd2022

Atomistic Simulation of Cementitious Systems: An Insight Into Adsorption of Ions and Small Molecules Onto Portlandite and C-S-H Surfaces

Masood Valavi

Calcium-Silicate-Hydrate (C-S-H) has been studied extensively over the last few decades to gain understanding toward the underlying mechanism of different stages during cement hydration. The variable stoichiometry and nanocrystallinity of C-S-H makes it di ...

EPFL2022

Geometric Percolation of Spherically Symmetric Fractal Aggregates

Claudio Grimaldi

The connectedness percolation threshold (phi(c)) for spherically symmetric, randomly distributed fractal aggregates is investigated as a function of the fractal dimension (d(F)) of the aggregates through a mean-field approach. A pair of aggregates (each of ...

SPRINGER2022

Hydration and mixture design of calcined clay blended cements: review by the RILEM TC 282-CCL

Karen Scrivener, Franco Alberto Zunino Sommariva, Mohsen Ben Haha, François Henri Avet

The RILEM technical committee 282-CCL: Calcined Clays as Supplementary Cementitious Materials, investigates all the aspects related to calcined clays, from clay exploration and characterization to calcination process, hydration reactions and concrete prope ...

SPRINGER2022

Impact of ZnO on C3S hydration and C-S-H morphology at early ages

Karen Scrivener, Xuerun Li

The hydration of ZnO doped C3S was investigated. Characteristics of the hydrated pastes including mechanical strength, degree of hydration, microstructure, pore structure, bound water and the chemical composition of C-S H are reported. 0.26 and 0.90 wt% of ...

Pergamon-Elsevier Science Ltd2022

Microstructural developments of limestone calcined clay cement (LC3) pastes after long-term (3 years) hydration

Karen Scrivener, Franco Alberto Zunino Sommariva

LC3 is one of the most promising alternatives for a high-performance blended cement with a significantly lower clinker content and with potential for worldwide adoption. For this reason, understanding its long-term performance is relevant to ensure service ...

Pergamon-Elsevier Science Ltd2022

Characterization of water sorption cycle in the cement microstructure of controlled oxide composition

Monisha Rastogi

This thesis investigates the water vapour sorption behaviour of samples with maximized calcium-silicate-hydrate (C-S-H) content. Primarily, the role of heterogeneous and homogeneous cavitation has been studied during the drying of cementitious materials. C ...

EPFL2022

Al uptake in calcium silicate hydrate and the effect of alkali hydroxide

Karen Scrivener, Yan Yan

The effect of Al and of pH on the structure of calcium silicate hydrate (C-S-H), the most important hydration product in Portland and blended cement, was studied at Ca/Si similar to 1.0. The presence of Al led to higher amounts of secondary phases, larger ...

Pergamon-Elsevier Science Ltd2022

Pre-bcc: A novel integrated machine learning framework for predicting mechanical and durability properties of blended cement concrete

Hisham Tarek Mohamed Hafez

Partially replacing ordinary Portland cement (OPC) with low-carbon supplementary cementitious materials (SCMs) in blended cement concrete (BCC) is perceived as the most promising route for sustainable concrete production. Despite having a lower environment ...

ELSEVIER SCI LTD2022