Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Mercury-vapor lamp

Related publications (24)

Photochemical Alkynylations with Hypervalent Iodine Reagents

Stephanie Grace Elizabeth Amos

Over the past twenty years, photochemical transformations have gained in importance in organic chemistry. Indeed, the development of photocatalysts has allowed the use of visible light as an energy source for chemical transformations. More specifically, ph ...

EPFL2022

Separation and Recycling Potential of Rare Earth Elements from Energy Systems: Feed and Economic Viability Review

Christian Ludwig, Rudolf Paul Wilhelm Jozef Struis, Ajay Bhagwan Patil

This review explores the potential of separating and recycling rare earth elements (REEs) from different energy conversion systems, such as wind turbines, electric vehicles batteries, or lighting devices. The REEs include 17 elements (with global productio ...

2022

Photonic nanostructures mimicking floral epidermis for perovskite solar cells

Mohammad Khaja Nazeeruddin, Hobeom Kim

Here, we report photonic nanostructures replicated from the adaxial epidermis of flower petals onto light-polymerized coatings using low-cost nanoimprint lithography at ambient temperature. These multifunctional nanocoatings are applied to confer enhanced ...

ELSEVIER2022

Enhanced transformation of aquatic organic compounds by long-lived photooxidants (LLPO) produced from dissolved organic matter

Urs von Gunten, Stephanie Christa Remke

Dissolved organic matter (DOM) plays a crucial role in the photochemical transformation of organic contaminants in natural aquatic systems. The present study focuses on the characterization of a specific effect previously observed for electron-rich phenols ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Spatial coherence properties of an LED-based illumination system for mask-aligner lithography

Hans Peter Herzig, Toralf Scharf, Wilfried Noell, Raoul Kirner, Johana Bernasconi

A high-power LED-based illumination system has been developed as a replacement for the mercury arc lamps used in mask-aligner lithography. LEDs are arranged in a grid array and placed in the entrance aperture of individual reflectors. Those reflectors decr ...

SPIE2019

High power ultraviolet LED illumination systems: coherence properties and applications in photolithography

Johana Bernasconi

Mask-aligner photolithography is a technology used to replicate patterns from a mask to a photosensitive substrate. It is widely used in the fabrication of MEMS and micro-optical components, and for other applications with dimensions in the micrometer rang ...

EPFL2018

High power modular LED-based illumination system for lithography applications

Hans Peter Herzig, Toralf Scharf, Wilfried Noell, Raoul Kirner, Johana Bernasconi

Mask-aligner lithography is a technology used to transfer patterns with critical dimensions in the micrometer range from below 1 micron for contact printing to a dozen of microns in proximity printing. This technology is widely used in the fabrication of M ...

2018

High-power modular LED-based illumination systems for mask-aligner lithography

Hans Peter Herzig, Toralf Scharf, Johana Bernasconi

Mask-aligner lithography is traditionally performed using mercury arc lamps with wavelengths ranging from 250 nm to 600 nm with intensity peaks at the i, g and h lines. Since mercury arc lamps present several disadvantages, it is of interest to replace the ...

2018

VUV/UV light inducing accelerated phenol degradation with a low electric input

Juan Kiwi

This study presents the first evidence for the accelerated degradation of phenol by Fenton's reagent in a minifluidic VUV/UV photoreaction system (MVPS). A low-pressure mercury lamp used in the MVPS led to a complete degradation of phenol within 4-6 min. T ...

RSC Publishing2017

Quantification of Total N-Nitrosamine Concentrations in Aqueous Samples via UV-Photolysis and Chemiluminescence Detection of Nitric Oxide

Urs von Gunten, Florian Frédéric Vincent Breider

N-Nitrosamines are potent mutagens and carcinogens that can be formed during oxidative water treatment. This study describes a novel method for the determination of total N-nitrosamines by UV-photolysis and subsequent chemiluminescence detection of nitric ...

American Chemical Society2017

Experimental and Numerical Characterization of a New 45 kWel Multisource High-Flux Solar Simulator

Sophia Haussener, Gaël Jean Clément Levêque

The performance of a new high-flux solar simulator consisting of 18 × 2.5 kWel radiation modules has been evaluated. Grayscale images of the radiative flux distribution at the focus are acquired for each module individually using a water-cooled Lambertian ...

Optical Society of America2016

Preparation, kinetics, mechanism and properties of semi-transparent photocatalytic stable films active in dye degradation

César Pulgarin, Juan Kiwi, Christophe Roussel, Laura Victoria Suárez Murillo

The photocatalytic activity, mechanism and characterization of polyethylene-TiO2 films (PE-TiO2) during the discoloration/degradation of methylene blue (MB) are reported in this study. PE-TiO2 films were prepared at moderate temperatures (similar to 90 deg ...

Elsevier2016

Determinants of disinfectant pretreatment efficacy for nitrosamine control in chloraminated drinking water

Urs von Gunten

Utilities using chloramines need strategies to mitigate nitrosamine formation to meet potential future nitrosamine regulations. The ability to reduce NDMA formation under typical post-chloramination conditions of pretreatment with ultraviolet light from a ...

Elsevier2015

Degradation rates of benzotriazoles and benzothiazoles under UV-C irradiation and the advanced oxidation process UV/H2O2

Urs von Gunten

Benzotriazoles (BTs) and benzothiazoles (BTHs) are extensively used chemicals found in a wide range of household and industrial products. They are chemically stable and are therefore ubiquitous in the aquatic environment. The present study focuses on the p ...

Elsevier2015

Light wavelength-dependent E. coli survival changes after simulated solar disinfection of secondary effluent

César Pulgarin, Sami Rtimi, Stefanos Giannakis

In this study, the photoreactivation and the modification of dark repair of E. coli in a simulated secondary effluent were investigated after initial irradiation under different conditions. The simulated solar exposure of the secondary wastewater was follo ...

Royal Society of Chemistry2015

Development of a Localization System Based on VLC Technique for an Indoor Environment

Kwang Moo Yi

In this paper, we develop an indoor localization device which embeds localization information into indoor light-emitting-diodes (LED) lighting systems. The key idea of our device is the use of the newly proposed "bit stuffing method". Through the use of st ...

Korean Inst Electr Eng2015

Class AAA LED-Based Solar Simulator for Steady-State Measurements and Light Soaking

Christophe Ballif, Franz-Josef Haug, Matthieu Despeisse, Michael Elias Stückelberger, Yannick Samuel Riesen

Recent improvements in light-emitting diode (LED) technology has allowed for the use of LEDs for solar simulators with excellent characteristics. In this paper, we present a solar simulator prototype fully based on LEDs. Our prototype has been designed spe ...

Ieee-Inst Electrical Electronics Engineers Inc2014

Occupants interaction with electric lighting and shading systems in real single-occupied offices: Results from a monitoring campaign

Marilyne Andersen

This study presents the results of a monitoring campaign aiming to further our understanding of occupants' behavior regarding the manual control of electric lighting in combination with shading control. It was performed on eight single-occupied offices in ...

Elsevier2013

Degradation of emergent contaminants by UV, UV/H2O2 and neutral photo-fenton at pilot scale in a domestic wastewater treatment plant

César Pulgarin, Luiz Felippe De Alencastro, Dominique Grandjean

This study focuses on the removal of 22 selected micropollutants in an effluent from a municipal wastewater treatment plant (MWTP) at pilot scale. A reactor of 37 L with five low pressure mercury lamps emitting at 254 nm (UV254) was used. The 22 micropollu ...

Elsevier2013

In situ copper–alumina composites

Andreas Mortensen, Carmen Krüger

We present a process for the production of Cu-Al matrix composites containing between 25 and 30 vol.% in situ Al2O3. The composites are prepared by pressing, heat-treating and hot working blended powders of Cu, Al and CuO packed into copper alloy cans. The ...

Elsevier2013