Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Economics of nuclear power plants

Related publications (22)

Overview on the Applicability of the ITER/NPP-Like Technologies to the DEMO Plant Electrical System and Promising Alternatives

Damien Fasel

The Plant Electrical System (PES) of the European DEMOnstration fusion power plant (DEMO), presently under conceptual design, shall supply power to the loads and deliver net power to the Power Transmission Grid (PTG). Starting from the available requiremen ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Innovative thermophysical characterization of an ATF composite cladding: the case of silicon carbide

Andrea Cavaliere

Nuclear power is a powerful technology that plays an important role in the fight against climate change, and research is continuously engaged in studies that could further improve its safety. After the Fukushima accident, Accident Tolerant Fuels research h ...

EPFL2024

Wind farm power density optimization according to the area size using a novel self-adaptive genetic algorithm

Fernando Porté Agel, Nicolas Otto Kirchner Bossi

This work studies the power density (PD) optimization in wind farms, and its sensitivity to the available area size. A novel genetic algorithm (PDGA) is introduced, which optimizes PD and the turbine layout, by self-adapting to the PD and to the solutions ...

Pergamon-Elsevier Science Ltd2023

Investigation and Validation of Unstructured Mesh Methodologies for Modeling Experimental Reactors

Andreas Pautz, Mathieu Hursin, Carlo Fiorina, Tom Mager

This paper summarizes a methodology developed at Ecole Polytechnique Federale de Lausanne for the neutronic modeling of the CROCUS experimental reactor and proposes solutions to the challenges one may face while modeling a research reactor with a complex g ...

MDPI2022

A Wearable Low-Power Sensing Platform for Environmental and Health Monitoring: The Convergence Project

Mihai Adrian Ionescu

The low-power sensing platform proposed by the Convergence project is foreseen as a wireless, low-power and multifunctional wearable system empowered by energy-efficient technologies. This will allow meeting the strict demands of life-style and healthcare ...

2021

Growth and viability of microorganisms in bentonite and their potential activity in deep geological repository environments

Niels Burzan

Radioactive waste is among the most dangerous anthropogenic waste and its safe disposal is a challenging multi-generational task. Many nations have sought for the peaceful application of nuclear fission for the reliable production of electric energy to pow ...

EPFL2021

Tuning the Size and Geometry of Heteroleptic Coordination Cages by Varying the Ligand Bent Angle

Rosario Scopelliti, Kay Severin, Farzaneh Fadaei Tirani, Rujin Li

Spherical assemblies of the type [PdnL2n]2n+ can be obtained from PdII salts and curved N-donor ligands, L. It is well established that the bent angle, α, of the ligand is a decisive factor in the self-assembly process, with larger angles leading to comple ...

2021

The COLIBRI experimental program in the CROCUS reactor: characterization of the fuel rods oscillator

Andreas Pautz, Vincent Pierre Lamirand, Mathieu Hursin, Carlo Fiorina, Oskari Ville Pakari, Pavel Frajtag, Axel Guy Marie Laureau, Adolfo Rais, Daniel Godat

The present article presents the mechanical characterization of the fuel rods oscillator developed for the purposes of the COLIBRI experimental program in CROCUS. COLIBRI aims at investigating the radiation noise related to fuel vibrations. The main motiva ...

2020

Experimental evaluation and modeling of fatigue of a 316L austenitic stainless steel in high-temperature water and air environments

Wen Chen, Wen Chen

Austenitic stainless steels is used in many components of nuclear power plants, particularly in the pipes of cooling systems. Owing to power transients and to start-ups and shutdowns, these components are subjected to thermo-mechanical loadings (low-cycle ...

EPFL2020

Wearable Triboelectric Generator based on a Hybrid Mix of Carbon Nanotube and Polymer Layers

Jürgen Brugger

A novel single-layer structured triboelectric generator (TEG) is proposed with a hybrid mix of carbon nanotube (CNT) and silk. Here, the mixing of two materials in liquid phase for proven effective power generation is shown. In this research, CNT provides ...

IOP PUBLISHING LTD2019

High-Fidelity Determination of Nuclide Inventories for Radioactive Waste Disposal

Valentyn Bykov

The general license application (RBG) for the Swiss deep geological repository will be submitted in 2024. Furthermore, the decommissioning of the nuclear power plants (NPPs) is coming soon, with the Mühleberg NPP (KKM) scheduled to shut down in 2019. In su ...

EPFL2019

Welfare effects of technology-based climate policies in liberalized electricity markets: seeing beyond total system cost

Philippe Thalmann, Frank Vöhringer, Sophie Maire

This paper is a contribution to assessing the Swiss energy transition, with an emphasis on the consequences of decommissioning the nuclear power plants for the electricity market and the whole economy. We expect that increased renewable generation and dema ...

2019

Helium effects on irradiation assisted stress corrosion cracking susceptibility of 316L austenitic stainless steel

Ignasi Villacampa Roses

The formation and growth of cracks by irradiation assisted stress corrosion cracking (IASCC) in light water reactor internals is a critical issue for a safe long-term operation of nuclear power plants. The IASCC susceptibility at relatively low dose is dom ...

EPFL2018

Pin-by-Pin Treatment of LWR Cores with Cross Section Equivalence Procedures and Higher-Order Transport Methods

Petra Mala

This thesis presents a systematic study on the merits and limitations on using pin-by-pin resolution and transport theory based approaches for nuclear core design calculations. Starting from the lattice codes and an optimal cross section generation scheme, ...

EPFL2018

Solvent-induced surface hydroxylation of a layered perovskite Sr3FeCoO7−δ for enhanced oxygen evolution catalysis

Xile Hu, Fang Song, Jun Gu

Efficient oxygen evolution reaction (OER) catalysts made of earth abundant elements are essential for the cost-effective generation of solar fuels. Surface modification is a novel strategy to enhance the activity of OER catalysts, however, it is commonly d ...

Royal Society of Chemistry2018

Not if, but when? Simulating the impact of timing the nuclear phase-out in Switzerland

Matthias Finger, Reinier Verhoog, Paul Adrianus Van Baal

Swiss electricity companies are faced with uncertainty with regards to the future operation of nuclear power plants in the country. After Fukushima in 2011, the government decided on a gradual phase-out, but only provided a tentative planning. Hence, no ne ...

2017

Investigation of the thermal conductivity of SiC/SiC cladding before and after irradiation

Loïc Guillaume Fave

Silicon carbide based composites are candidates for structural components and fuel claddings in nuclear power plants. In the frame of accident tolerant fuel research, the effective through-thickness thermal conductivity of SiC/SiC prototype claddings is in ...

EPFL2017

The information platform energyscope.ch on the energy transition scenarios

François Maréchal, Daniel Favrat, François Richard Vuille, Victor Codina Gironès

Switzerland like many countries plans to undertake an energy transition and the government proposes different paths for 2035 and 2050 to achieve it. However the authors of this paper felt the need for a better information of the public on the energy matter ...

2016

Impact of Insurance on Earthquake Risk Territories in Japan

Rémy Zgraggen

The subject of the present PhD thesis is the qualitative, interdisciplinary analysis of the impact of earthquake insurance on earthquake risk territories in Japan. On the one hand, the Japanese Earthquake Insurance System (JEI) will be analyzed; on the oth ...

EPFL2015

Light management in thin film silicon solar cells

Christophe Ballif, Franz-Josef Haug

Thin film silicon is an attractive and versatile material for photovoltaics whose manufacturing reached a high level of maturity. Owing to its moderate efficiency compared to crystalline technologies, it should target either power plants with low installat ...

Royal Society of Chemistry2015