Ambrogio FasoliAmbrogio FASOLI was born on November 10, 1964, in Milano, Italy. After a classical high school diploma (Maturità Classica) and graduation from the University of Milano, with the degree of Dottore in Fisica, he obtained his Phd at the Ecole Polytechnique Fédérale (EPFL) with a thesis on chaos in wave-particle interactions in plasmas, which was awarded the Best EPFL Thesis prize, in 1993. He then moved to the JET Joint Undertaking, the largest worlds fusion device, near Oxford, UK, to investigate Alfvén waves and burning plasma physics. In 1995-1996 he took a sabbatical leave, visiting several Universities and Research Institutes in Europe and in the USA, including three months at General Atomics in San Diego. In 1996-1997, during a second period at JET, he participated in the fusion power worlds record experiments in Deuterium-Tritium plasmas at JET. In 1997 he was nominated Assistant Professor in MIT Physics Department, where he led a basic plasma physics group and the international collaboration between MIT and JET. In 2001 Ambrogio FASOLI was nominated Assistant Professor of Physics at EPFL, Lausanne, Switzerland, and Professeur Boursier of the Swiss National Science Foundation. He became member of CRPP Directorate and took the leadership of CRPP basic plasma physics group and of the TCV tokamak, one of the major fusion experiments worldwide. At European level he was scientific coordinator for JET experiments, spokesperson for multi-machine experiments in the frame of International Tokamak Physics Activities, and Project Leader for a JET Enhancement project. In 2005 he became Associate Professor of Physics with tenure at EPFL, then member of EFDA Science and Technology Advisory Committee, and of the Steering Committee of the Association EURATOM-Swiss Confederation. From 2006 he was also Deputy Director, then from 2007 Executive Director of CRPP and from 2008 Full Professor of Physics at EPFL. For a number of years he was the Chair of the EPFL Physics Strategic Committee and a member of the Directorate of the EPFL School of Sciences. Since the summer of 2014 Professor FASOLI was the sole Director of CRPP. He now represents Switzerland in the EUROfusion General Assembly and Bureau, and in the Governing Board for Fusion for Energy. He is member of the EUROfusion DEMO project Board, of the Scientific Board of the Helmotz Virtual Institute on Advanced Microwave Diagnostics, of the European Delegation for the Cooperation between Euratom and the Government of India in Fusion Energy Research, of the European Consortium for the development of the ITER gyratron (EGYC), and participates to numerous international review panels. He chairs the FuseNet Academic Council, the International Advisory Panel for the Laboratory of Excellence Plas@Par in the Sorbonne Universities, the European Consortium for the construction of the ITER microwave Upper Launcher (ECHUL), and the Promotion Committee of the EPFL Faculty of Basic Sciences. He is one the three European representatives in the International Tokamak Physics Activities Coordinating Committee, advising ITER, and the Editor-in-Chief of the IAEA journal Nuclear Fusion. Since January 2019, Ambrogio Fasoli is the Chair of the General Assembly, i.e. the president of EUROfusion, the European Consortium for Development of Fusion Energy. Professor FASOLI is a Fellow of the American Physical Society and since 2001 a Visiting Professor at MIT Physics Department. He is the Director of the Swiss Plasma Center.
Paolo GermanoFORMATION
Mars 1990 : Engagement au Laboratoire d'électromécanique et de machines électriques (LEME), devenu entre temps le laboratoire d'actionneurs intégrés (LAI), comme assistant puis comme fonctionnaire scientifique.
Janvier 1990 : Diplôme d'ingénieur EPF en microtechnique.
Juillet 1985 : Maturité de type scientifique.
-
-
- EXPERIENCES ET DOMAINES DE COMPETENCES
-
Modélisation et simulation de l'alimentation des moteurs de l'avion Solar Impulse sur la base des résultats de la modélisation par éléments finis (FEM) de la structure magnétique Développement du banc de mesure (mécanique et software) du moteur Solar Impulse (dès mars 2004);
-
Dans le cadre d'un Projet CTI en collaboration avec l'entreprise Medtronic (Projet ColoStim), développement d'un appareil de traitement de la constipation consistant en des électrodes implantées le long du colon et alimentées par induction, à haute fréquence, à l'aide d'une bobine primaire placée autour du thorax du patient (janvier 2006 - mars 2007);
-
Développement du modèle équivalent d'une montre à glace tactile et analyse de l'effet des décharges électrostatiques sur cette montre. Projet CTI en collaboration avec l'entreprise ETA-Swatch Group (avril 2003 à octobre 2004);
-
Développement d'un système de transfert d'énergie pour navettes automotrices de machines d'assemblage. Projet CTI en collaboration avec l'entreprise Montech AG (octobre 2001 à octobre 2002);
-
Développement d'une installation de transfert d'énergie pour des wagonnets de transport de rouleaux pour l'industrie du papier avec l'entreprise Valmet AG (Groupe Metso Paper) (2001);
-
Développement d'un banc de mesure pour actionneurs linéaires dans le cadre d'un mandat avec l'entreprise Sonceboz SA (mars 1998 - juillet 2000);
-
Développement d'une installation de transfert d'énergie pour un convoyeur d'outils dans le cadre d'un mandat avec l'entreprise MCM SpA (Italie) (juillet 1998 avril 1999 et déc. 1999 avril 2000);
-
Développement d'un banc de test pour vibreur électromécanique dans le cadre d'un mandat avec l'entreprise ASULAB SA à Marin (octobre décembre 1999);
-
Développement et responsabilité d'une installation de démonstration d'un Système de transport automatique à transmission d'énergie par induction - Projet Serpentine 2 PSEL (déc. 1996 juin 1999);
-
Développement d'un banc de mesure et d'analyse pour moteurs à courant continu dans le cadre d'un projet d'impulsion RAVEL (sept. 1995 - mars 1997);
-
Développement d'un convertisseur de fréquence à résonance de 2,4 kW pour l'alimentation d'un transformateur sans fer dans le cadre du transfert d'énergie sans contacts Projet Serpentine PSEL (février 94 déc. 1995);
-
Développement d'un banc de mesure pour moteurs pas à pas dans le cadre d'un mandat avec l'entreprise Sonceboz SA (mars 1992 nov. 1995);
-
Développement d'un convertisseur direct de fréquence AC/AC de basse puissance dans le cadre du projet du cur artificiel Suisse (mars 1990 - mars 1992);
-
Suivi d'une vingtaine de projets de semestre et de master EPFL;
-
Divers projets de moindre envergure (alimentations, démonstrateurs, acquisitions de données, micro-informatique, circuits imprimés).
PUBLICATIONS
DOMAINE DU TRANSFERT D'ENERGIE PAR INDUCTION
M. Jufer, L. Cardoletti, B. Arnet, P. Germano, Ch. Koechli, N. Macabray, M. Perrottet, "Dispositif de transmission d'énergie électrique à un véhicule, sans contact, par induction - Projet PSEL N° 16 - Magnéto-glisseur", Rapport de synthèse 1995, EPFL-DE-LEME, Lausanne - Suisse, 18 octobre 1995;
M. Jufer, L. Cardoletti, P. Germano, B. Arnet, M. Perrottet, N. Macabrey, "Induction Contactless Energy Transmission System for an Electric Vehicle", ICEM96, International Conference on Electrical Machines, Vigo, Sept. 10-12, 1996, Vol II, pp. 343-347;
P. Germano, M. Jufer, "Contactless power transmission: Frequency tuning by a maximum power tracking method", EPE '97, 7th European Conference on power electronics and applications, Trondheim, Sept. 8-10, 1997, Vol IV, pp. 693-697;
M. Jufer, L. Cardoletti, P. Germano, B. Arnet, M. Perrottet, Swiss Federal Institute of Techno-logy, DE-LEME, 1015 Lausanne, Switzer-land, "Inductively powered automatic vehicles - Ser-pen-tine", EVS-15 '98, 15th International Electric Vehicle Symposium and Exhibition, Brussel, Belgium, Sept. 29 - Oct. 3, 1998, pp. 403-404;
P. Germano, Nicolas Macabrey, M. Jufer, Swiss Federal Institute of Technology, DE-LEME, 1015 Lausanne, Switzerland, "Contactless Power Transmission: Linear Positioning of the Moving Element", EPE '99, 8th European Conference on Power Electronics and Applications, Lausanne, 7-9 September, 1999, Art Nb 685;
P. Germano, M. Jufer, L. Cardoletti, B. Arnet, Ch. Koechli, N. Macabray, M. Perrottet, "Système de transport automatique à transmission d'énergie par induction. - Projet PSEL N° 115", Rapport final 1999, EPFL-DE-LEME, Lausanne - Suisse, 31 août 1999;
P. Germano, I. Stefanini, W. Montella, L. Cardoletti, Y. Perriard, "Système de transfert d'énergie pour navette de machines d'assemblage Projet CTI n° 5780.1 KTS", Rapport final, EPF Lausanne-LAI, Suisse, mars 2004;
I. Stefanini, P. Germano, L. Cardoletti, W. Montella, Y. Perriard, "Inductive Charge System for Assembly Plant Shuttles", CD-ROM, EPE 2003, Toulouse, (France), 2-4 Septembre 2003;
P. Germano, I. Stefanini, Y. Perrirad, "Stimulation colique pour le traitement des troubles de la motilité Projet ColoStim Projet CTI n° 7362.2 LSPP-LS", Rapport final, EPF Lausanne-LAI, Suisse, mai 2007.
DOMAINES DES BANCS DE MESURE - MESURES
P. Germano, "Système automatique de mesure", Rapport technique vol. I & II, EPF-Lausanne, 1995;
P. Germano, Ch. Kuert, "Banc de mesures automatisé pour entraînements électriques", Présentation et mode d'emploi, EPF-Lausanne, 1997;
P. Germano, Ch. Kuert, M. Jufer, Swiss Federal Institute of Technology, DE-LEME, 1015 Lausanne, Switzerland, "Automated test bench for electric drives: Modular layout of soft- and hardware", EPE '99, 8th European Conference on Power Electronics and Applications, Lausanne, 7-9 September, 1999, Art Nb 683;
Y. Perriard, P. Germano, I. Verettaz, "Banc de test pour vibreur électromécanique", Rapport technique, EPF-Lausanne, janvier 2000;
P. Germano, Ch. Kuert, M. Jufer, Swiss Federal Institute of Technology, DE-LEME, 1015 Lausanne, Switzerland, "DSP controlled automated Test Bench for linear Actuators Design and Choices", EPE 2001, 9th European Conference on Power Electronics and Applications, Graz, 27-29 August, 2001, Art Nb 709;
P. Germano, M. Crivii, D. Demarco, Y. Perriard, Swiss Federal Instutute of Technology, LAI, 1015 Lausanne, Switzerland & L. Paratte, R. Marquis, Service Unit RD, ETA SA (Swatch Group), 2540 Granges, Switzerland, "Analysis and Modeling of Electrostatic Discharge in a Tactile Glass Featured Watch", IAS 2004, 39th Annual Meeting, Seattle, WA, USA, October 3-7, 2004;
P. Germano, M. Crivii, D. Demarco, Y. Perriard, Swiss Federal Instutute of Technology, LAI, 1015 Lausanne, Switzerland & L. Paratte, R. Marquis, Service Unit RD, ETA SA (Swatch Group), 2540 Granges, Switzerland, "Analysis and Modeling of Electrostatic Discharge in a Tactile Glass Featured Watch", IEEE Transaction on Industry Applications, Volume 43, Issue 4, July-aug. 2007, Page(s): 1091-1098; Elison de Nazareth MatioliTeaching & PhD PhD Students Hongkeng Zhu, Yuan Zong, Utku Agtas, Ibrahim Osama Elhagali, Mohammad Rezaei, Zheng Hao, Amirhossein Esteghamat, Ivan Krsic, Luca Mazzone, Önder Soydal, Francesco Marcantoni, Hakan Cankat Gür Past EPFL PhD Students Jun Ma, Giovanni Santoruvo, Minghua Zhu, Riyaz Mohammed Abdul, Reza Soleiman Zadeh Ardebili, Armin Jafari, Catherine Erine, Taifang Wang, Nirmana Perera, Remco Franciscus Peter van Erp, Luca Nela, Mohammad Samizadeh Nikoo, Alessandro Floriduz Past EPFL PhD Students a
Stefano CodaTeaching & PhD PhD Students Vincent Masson, Luigi Persico, Ewout Koen L. Devlaminck, Martino Bonisolli, Alessandro Balestri, Mackenzie Peter-Fulford Van Rossem, James Winston Irawati Tumbokon, Salomon Guinchard, Inès Vergara, Michele Bottino Past EPFL PhD Students Alessandro Marinoni, Silvano Gnesin, Cornelis Adrianus de Meijere, Josef Kamleitner, Zhouji Huang, Himank Anand, Pedro Andres Molina Cabrera, Dahye Choi, Federico Pesamosca, Aylwin Iantchenko, Jean Arthur Cazabonne
Hervé LissekExpertise
Acoustics and audio engineering, Electroacoustics.Room acoustics.Active noise control.Acoustic metamaterials.Assisted reverberation.Psychoacoustics.Sound spatialization
Expertise
Acoustics and audio engineering, Electroacoustics.Room acoustics.Active noise control.Acoustic metamaterials.Assisted reverberation.Psychoacoustics.Sound spatialization
Mission
Head of the Acoustic Group at the Laboratory of Wave Engineering LWE. Research topics :Active Electroacoustic Resonators: turning conventional lou
Farhad Rachidi-HaeriFarhad Rachidi (IEEE Fellow, EMP Fellow, Electromagnetics Academy Fellow) was born in Geneva in 1962. He received the M.S. degree in electrical engineering and the Ph.D. degree from the Swiss Federal Institute of Technology, Lausanne, in 1986 and 1991 respectively.
He worked at the Power Systems Laboratory of the same institute until 1996 and had several short stays at the University of Florida and the NASA Kennedy Space Center. In 1997, he joined the Lightning Research Laboratory of the University of Toronto in Canada and from April 1998 until September 1999, he was with Montena EMC in Switzerland. He is currently a titular professor and the head of the EMC Laboratory at the Swiss Federal Institute of Technology, Lausanne, Switzerland.
His research interests concern electromagnetic compatibility, lightning electromagnetics and electromagnetic field interactions with transmission lines.
Dr. Rachidi is currently a member of the Advisory Board of the IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY and the President of the Swiss National Committee of the International Union of Radio Science.
He has received numerous awards including the 2005 IEEE EMC Technical Achievement Award, the 2005 CIGRE Technical Committee Award, the 2006 Blondel Medal from the French Association of Electrical Engineering, Electronics, Information Technology and Communication (SEE), the 2016 Berger Award from the International Conference on Lightning Protection, the 2016 Best Paper Award of the IEEE Transactions on EMC, and the 2017 Motohisa Kanda Award for the most cited paper of the IEEE Transactions on EMC (2012-2016).
In 2014, he was conferred the title of Honorary Professor of the Xi’an Jiaotong University in China.
He served as the Vice-Chair of the European COST Action on the Physics of Lightning Flash and its Effects from 2005 to 2009, the Chairman of the 2008 European Electromagnetics International Symposium, the President of the International Conference on Lightning Protection from 2008 to 2014, the Editor-in-Chief of the Open Atmospheric Science Journal (2010-2012) and the Editor-in-Chief of the IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY from 2013 to 2015. He is a Fellow of the IEEE and of the SUMMA Foundation, and a member of the Swiss Academy of Sciences.
He is the author or coauthor of over 200 scientific papers published in peer-reviewed journals and over 400 papers presented at international conferences.
Alan HowlingTeaching & PhD Past EPFL PhD Students Juliette Ballutaud Past EPFL PhD Students as codirector Boris Legradic, Michaël Chesaux, Ralph Schnyder, Riccardo Agnello
Duccio TestaProfessionals experiences Supply teacher of mathematics, physics and computing 1994–1995 various high schools in Torino (Italy)
Teaching & PhD Past EPFL PhD Students as codirector Theodoros Panis, Lorenzo Stipani Courses Sustainable energy innovation HUM-292 This course provides an introduction to the technical, social, and economic fundamentals of energy. The course examines the concrete case of nuclear fusion. How could this energy reshape our world? How can we ensure its acceptability, st
Demetri PsaltisResearch group
Teaching & PhD PhD Students Victoria Fay, Colin Nikhil Christian Past EPFL PhD Students Wuzhou Song, Alexandre Goy, Julien Cuennet, Ioannis Papadopoulos, Xin Yang, Grégoire Pierre Jean Laporte, Thomas Jean Victor Marie Lanvin, Seyyed Mohammad Hosseini Hashemi, Nicolino Stasio, Morteza Hasani Shoreh, Marilisa Romito, Pooria Hadikhani, Eirini Kakkava, Joowon Lim, Giulia Panusa, Ahmed Bassam Sayed Ayoub Mohamed Ayoub, Amirhossein Saba, Niyazi Ulas Dinç Past EPFL PhD
Mihai Adrian IonescuAdrian M. Ionescu is Full Professor at the Swiss Federal Institute of Technology, Lausanne, Switzerland. He received the B.S./M.S. and Ph.D. degrees from the Polytechnic Institute of Bucharest, Romania and the National Polytechnic Institute of Grenoble, France, in 1989 and 1997, respectively. He has held staff and/or visiting positions at LETI-CEA, Grenoble, France and INP Grenoble, France and Stanford University, USA, in 1998 and 1999. Dr. Ionescu has published more than 600 articles in international journals and conferences. He received many Best Paper Awards in international conferences, the Annual Award of the Technical Section of the Romanian Academy of Sciences in 1994 and the Blondel Medal in 2009 for contributions to the progress in engineering sciences in the domain of electronics. He is the 2013 recipient of the IBM Faculty Award in Engineering. He served the IEDM and VLSI conference technical committees and was the Technical Program Committee (Co)Chair of ESSDERC in 2006 and 2013. He is a member of the SATW. He is director of the Laboratory of Micro/Nanoelectronic Devices (NANOLAB).
André HodderTeaching & PhD PhD Students Lucien André Félicien Pierrejean Past EPFL PhD Students as codirector Simone Rametti Courses Actuators and Electromagnetic systems II MICRO-314 The students will be able to model, simulate and measure actuators and electrical motors Advanced lab in electrical energy systems EE-588 Pre-requisites required. The number of places is limited. Please register only after having obtained the teacher's agreement. The purpose of this teaching lab is to put
Amir JafargholiTeaching & PhD PhD Students Senlu Zhou Courses Antennas EE-446 The students will first learn the fundamental principles governing antennas and get familiar with the main antenna types. In the second part, students will work in groups on an antenna design project. Through this, they will learn to use common simulation tools, and perform antenna measurements
Fabrizio SossanExpertise
Mathematical Modelling, Forecasting and Optimization for Power System Applications
Current work
He is currently working on (i) forecasting of the electrical load in application to real-time control of micro-grids and (ii) planning and development of the power system infrastructure under an increased penetration of distributed generation.
Fabrizio is an Italian citizen and was born in Genova on 9th April 1985. He got his B.Sc. and M.Sc. in Computer Engineering from the University of Genova in 2007
Pierre LavanchyFormation Electronique et mécanique de base | Atelier d'électronique et mécanique en parallèle de cours théoriques 1982 – 1984 Ecole Technique et des Métiers de Lausanne ETML Dirigée par Electronique, mécanique Electronique industrielle | Diplôme d’ingénieur ETS en électronique 1985 – 1987 EINEV Ecole d’Ingénieurs de l’Etat de Vaud (Yverdon, Suisse) Dirigée par Cours et laboratoires en électronique
