Thomas KellerEDUCATION
1992 Dr. sc. techn. (PhD)
Swiss Federal Institute of Technology, Zurich (ETH)
1983 Dipl. Bauing. ETH (MS civil engineering)
Swiss Federal Institute of Technology, Zurich (ETH)
EMPLOYMENT
2007-present, Full Professor of Structural Engineering (100%)
Swiss Federal Institute of Technology, Lausanne (EPFL)
Civil Engineering Institute
1998-2007, Associate Professor of Structural Engineering (80/100%)
Swiss Federal Institute of Technology, Lausanne (EPFL)
Structural Engineering Institute
Foundation of CCLab in 2000
1996-1998, Assistant Professor of Structural Engineering (50%)
Swiss Federal Institute of Technology, Zurich (ETH)
Department of Architecture
1992-2004, Senior Project Engineer and Joint Owner
Engineering offices in Zug and Zurich
1990-1992, Research Scientist
Swiss Federal Institute of Technology, Zurich (ETH)
Structural Engineering Institute
1986-1990, Project Engineer
Architecture and engineering office Calatrava, Zurich
1983-1986, Teaching and Research Assistant
Swiss Federal Institute of Technology, Zurich (ETH)
Structural Engineering Institute
Dimitrios LignosProf. Lignos joined the École Polytechnique Féderale de Lausanne (EPFL) in 2016 from McGill University in Canada where he was a tenured Associate Professor and a William Dawson Scholar for Infrastructure Resilience. He holds a diploma (National Technical University of Athens, NTUA, 2003), M.S. (Stanford University, 2004) and Ph.D. (Stanford University, 2008). In addition, he was a post-doctoral scientist at Stanford University (2009) and in Kyoto University (2010). Prof. Lignos teaches graduate and undergraduate courses in seismic design, nonlinear behaviour of steel and composite structures as well as supplemental damping systems, Structural Stability, Nonlinear Analysis and Performance-based Earthquake Engineering. His awards for teaching, research and service in Civil Engineering include the 2011 Outstanding Teaching Award (Faculty of Engineering, McGill University), as well as the Outstanding reviewer (2012, 2013) award from ASCE, the 2013 State-of-the-Art in Civil Engineering Award by ASCE and the 2014 Christophe Pierre Award for Research Excellence - Early Career. Just recently, he received the 2019 Walter L. Huber Civil Engineering Research Prize from ASCE for significant contributions in developing state of the art methods to simulate extreme limit states in steel structures.Prof. Lignos is a member of ASCE and the Earthquake Engineering Research Institute. He acts as an Associate Editor for Metal Structures and Seismic Effects of the ASCE Journal of Structural Engineering. He joined the Editorial Board of Earthquake Spectra and Earthquake Engineering and Structural Dynamics International journals. He serves as an acting member of the CEN/TC 250/SC 8/WG 2 and has been selected as a member of the Project Team (PT2) for the Eurocode 8-Part 1 Current Revisions for Steel and Composite Structures. He is also a member of the Canadian Standards Association (CSA) S16 technical committee for Steel Structures. Prof. Lignos is involved as a NEHRP consultant in numerous research-to-practice projects related to the behaviour and nonlinear modelling and analysis of structures applicable to the engineering practice through the Applied Technology Council (ATC). Detailed Curriculum Vitae (last update September 2018)
Katrin BeyerSince 2017 Associate Professor, School of Architecture, Civil and Environmental Engineering (ENAC), EPFL. Head of the Earthquake Engineering and Structural Dynamics (EESD) Laboratory
2010-2017 Assistant Professor, EPFL.
2008-2010 Post-doctoral researcher, ETH Zürich.
2003-2007 Ph.D., Roseschool / Università di Pavia, Italy.
2001-2003 Ove Arup & Partners, Advanced Technology and Research Group, London.
2001 Diploma, Civil engineering, ETH Zürich.
Eugen Brühwilerbirth date: 19.11.1958 nationality: Swiss (native from Dussnang, Canton of Thurgau) Education : - July 1988 : doctoral degree from the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland with a thesis entitled Fracture mechanics of dam concrete subjected to quasi-static and seismic loading conditions - December 1983 : civil engineering diploma (university degree) from the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland Professional Experience : - Since 1st April 1995 : Professor of Structural Engineering at EPFL and Head of the Laboratory of Maintenance, Construction and Safety for Civil Structures (MCS) (often considered being the first chair worldwide devoted exclusively to existing civil structures). - 1991-94 Project Manager and structural engineer with the Swiss Federal Railways (SBB), Division of Bridges and Structures, Zurich: Monitoring and maintenance of bridges and structures, Project manager and checking engineer for the construction of new bridges and rehabilitation of existing bridges. - 1989/90 Research associate at the Department of Civil Engineering, University of Colorado, Boulder, USA : Fracture mechanics of concrete and fracture of concrete dams. - 1986-88 Doctoral student at EPFL-LMC (Building Materials, Prof. Wittmann) : Fracture mechanics of concrete, fracture of concrete dams under seismic loading - 1984/85 Research engineer at EPFL-ICOM (Steel Structures, Prof. Badoux and Prof. Hirt) : Fatigue behaviour and fracture mechanics of riveted bridges
Anastasios VassilopoulosPERSONAL INFORMATION Name : Anastasios P. Vassilopoulos email : anastasios.vassilopoulos@epfl.ch Tel: 41 21 6936393 Fax: 41 21 6936240 SUMMARY OF QUALIFICATIONS 1995: Dipl. Mechanical Engineer, University of Patras, Greece 2001: Dr Mechanical Engineer, Doctoral thesis in fatigue of composite materials from the Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece CURRENT POSITION Senior Scientist (MER), Composite Construction Laboaratory (CCLab), EPFL PREVIOUS POSITIONS 2006-2012 Research and Teaching Associate, Composite Construction Laboaratory (CCLab), EPFL 2002-2006 Assisstant Professor, Technological Educational Institute (TEI) of Patras, Greece 2001-2003 Post-doctoral Research associate, (Part-time) Dept. Mechanical Engineering and Aeronautics of the University of Patras, Greece. EDUCATION 1990 - 1995 Graduate student, Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece October 1994-January 1995 Dept. Mechanical Engineering, University of Bristol, U.K. (In the frame of Erasmus project for the final year thesis, under the supervision of Prof. R. D. Adams) 1995 - 2000 Research assistant, Dept. Mechanical Engineering and Aeronautics, University of Patras. LANGUAGES English, Greek, French COMMUNITY ACTIVITIES (Member of) Council of the European Society of Composite Materials (ESCM) Council of the European Society of Experimental Mechanics (EuraSEM) The European Structural Integrity Society (ESIS) The European Energy Research Alliance (EERA, JP WIND) The Technical Chamber of Greece (TCG) The Hellenic Association of Mechanical & Electrical Engineers SCIENTIFIC-RESEARCH INTERESTS Experimental methods for the study of the behavior of composite materials under static and fatigue loading Development of analytical methods for the study of the behavior of FRP composite materials under variable amplitude complex stress states Development of fatigue life prediction methodologies for composite materials and structures Design of constructions with composite materials Ian SmithPhD, Cambridge University, 1982 Interests 1 Active shape control for structures for deployment and where serviceability criteria governs 2 Biomimetic structures (learning, self-diagnosis, self-repair) 3 Infrastructure management support through structural identification 4 Advanced computer-aided engineering applications of stochastic optimization and search, multi-criteria analysis, system uncertainties (measurement and modelling), multi-modal approaches (combining statistics with behavior models) More details : see https://www.epfl.ch/labs/imac/research/iansmith/ Philippe SpätigPhilippe Spätig is currently Adjunct Professor at EPFL in the School of Basic Sciences, in the Laboratory of Reactor Physics and Systems Behaviours. He obtained his diploma of Engineer Physicist at EPFL in 1991 and his PhD at EPFL in 1995 on the role of thermal activation in the plasticity of the intermetallic Ni3Al. From 1995 to 1997, he worked as postdoc in the Materials Group of the Center for Research in Plasma Physics at EPFL, studying the effects of high-energy proton irradiation on alloys and pure metals. He then moved to the University of California Santa Barbara and spent two years in the group of Professor G.R. Odette, working on fracture mechanics of ferritic structural steels. He joined again the Materials Group of the Center for Research in Plasma Physics at EPFL in 2000 and worked in this group until the end of 2012. His research was focused on irradiation hardening and embrittlement of steels, as well as on the development of oxide dispersion strengthened steels. He also worked and developed experimental and analytical small specimen test techniques to reliably extract mechanical properties from limited material volume. In 2013, he joined the Laboratory for Nuclear Materials at Paul Scherrer Institute, while being associated with the Laboratory for Reactor Physics and System Behaviours at EPFL. Since then he mainly works on environmentally-assisted fatigue and fracture on austenitic and pressure vessel steels, where the effects of light water reactor environment on mechanical properties are investigated.
Dario FloreanoProf. Dario Floreano is director of the Laboratory of Intelligent Systems at the Swiss Federal Institute of Technology Lausanne (EPFL). Since 2010, he is the founding director of the Swiss National Center of Competence in Robotics, a research program that brings together more than 20 labs across Switzerland. Prof. Floreano holds an M.A. in Vision, an M.S. in Neural Computation, and a PhD in Robotics. He has held research positions at Sony Computer Science Laboratory, at Caltech/JPL, and at Harvard University. His main research interests are Robotics and A.I. at the convergence of biology and engineering. Prof. Floreano made pioneering contributions to the fields of evolutionary robotics, aerial robotics, and soft robotics. He served in numerous advisory boards and committees, including the Future and Emerging Technologies division of the European Commission, the World Economic Forum Agenda Council, the International Society of Artificial Life, the International Neural Network Society, and in the editorial committee of several scientific journals. In addition, he helped spinning off two drone companies (senseFly.com and Flyability.com) and a non-for-profit portal on robotics and A.I. (RoboHub.org). Books
Manuale sulle Reti Neurali, il Mulino (in Italian), 1996 (first edition), 2006 (second edition)Evolutionary Robotics, MIT Press, 2000
Bio-Inspired Artificial Intelligence, MIT Press, 2008
Flying Insects and Robots, Springer Verlag, 2010
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Christophe BallifChristophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.
Véronique MichaudBackground:
1994 Habilitation à diriger des recherches ( INPG, France)
1991 PhD in Materials Engineering ( MIT, USA)
1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France)
Activities:
Since January 2018: Associate Dean of Engineering, in charge of Education
June 2012-Dec.2017: Head of the Materials Science and Engineering Section
Since April 2017: Associate Professor at EPFL
2009-2017 : Professeur Titulaire at EPFL
1997-2009: Researcher at EPFL
1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France)
1991-1994 : Post-doctoral research associate, MIT (USA)
Author of about 300 publications of which 140 in peer-reviewed journals
John BotsisJohn (Ioannis) Botsis obtained his diplôme in civil engineering at the University of Patras, Greece in 1979. He continued his education at Case Institute of Technology in Cleveland Ohio/USA, where he received his MS and Ph.D. in 1984. After two years at the research center for national defense in Athens he was nominated assistant professor at the University of Illinois in Chicago, associate in 1991 and full professor in 1995. In 1996, he was nominated professor of solids and structural mechanics at the EPFL. At EPFL he teaches mechanics of structures and mechanics of continuous media´ at the bachelors level and Fracture mechanics at the masters and doctoral levels. His research covers the mechanics of solids and structures, fracture mechanics and micromechanics of polymers, metals and their composites as well as biomechanics. He is also actively involved in full-filed optical methods for surface strain measurements as well as internal strain measurements using fiber Bragg grating sensors, aimed at characterizing micromechanics of fracture, residual strains and strain distribution in composite laminates for structural monitoring. Funding for his research comes from the Swiss National Science Foundation, State Secretariat for Education and Research and Swiss industry. He retired on February 28, 2020.
Peter RyserDr. Peter Ryser is a Professor Emeritus at the Swiss Federal Institute of Technology in Lausanne. He has over three decades of research and teaching experience from various corporate and academic institutions. He was previously a Director at Siemens Building Technologies where he was responsible for R&D, product innovation and patents. Dr. Ryser has a Ph.D. in applied Physics from the University of Geneva, a Masters degree in Experimental Physics and an MBA.
